is there anywhere i can find lga 1155 ITX board here??? most of the seller here dun hv already

i think my board just fry, z77 extreme 4, cant power on, my gpu still got light at connector, not suspecting PSU issue, just purchase some secondhand p67 board , should be find right for my i7 2600k? where can i rma my board? will it be expensive? hard to find same board.

Hello,

Z77 is rather old now, your warranty could've expired.

We'll get back to you regarding this matter.

1155 is really old, best bet is on used section area.

Nowadays we're already focusing on new Intel series processor (Skylake). Even the previous generation would be phasing out soon.

been using z87 extreme 6. 10 sata,dual gbe lan.1st plan want to use as nas/server but never did. Now searching for server board from asrockrack. Any place/shop can buy locally?

I have a H81M-HG4 mobo for my mom's budget build. When the PC is shutdown, my keyboard is still powered. When any key is pressed, the PC can startup. How do I disable it? I want it to be fully powered down.

Disable the "Wake/Turn On by Keyboard" function in the BIOS.

Already disabled but it still can powered up via keyboard. That's why it's weird. I'm using PS/2 keyboard.

There are 2 settings, one for USB keyboard and the other one for PS2.

It's also worth checking out if your "shut down" is a real shut down or just a suspension to S3/S6 state, so check that in your OS and BIOS as well.

If it's a potential bug, I'd suggest checking Asrock's FAQ for that particular motherboard and updating the BIOS as required.

This post has been edited by empire23: Mar 5 2016, 01:58 PM

Do you still face that problem?

I'm afraid server boards are not our focus at this point of time, not in Malaysia.

asrock Z77E-ITX. please pm me if you got stock for this. Thanks

Hello, AsrockMY. Do u know where to buy this workstation type of motherboard in Malaysia?
http://www.asrockrack.com/general/productd...#Specifications

Thanks.

Finally sold by trusty Biostar TPower i45 which has served me well for 8 years.

When choosing a motherboard, I'm looking for these features:
- rock stable, problem free (I can't afford ant RMA. I don't live next to LowYat Plaza)
- huge-ass VRM heatsink (Malaysia is hot, so need the extra cooling)
- overclock champion in its family (ASRock OCFormula featured in IDF)
- good onboard audio (no noise when moving mouse / scrolling)
- no extra useless features which tend to jack up the price and kill itself (ROG)
- great reviews everywhere (including user reviews in amazon and newegg)
- reasonably priced (USD-MYR sucks)

Bought myself a ASRock Fatal1ty Gaming K6 for a new Skylake build (OCFormula reserved for N2-cooling taikor). Booted up fine with dual channel Corsair LPX memory and installed Win10 without issue. What a relief after hearing many bad Skylake-memory-bug stories (debug code 55, IRQL not less or equal, etc). Perhaps I'm just lucky. My last ASRock was an H81M-HG4 which I've built for my mom's rig. It was running perfect on first boot too.

Currently, the only drivers that I've installed are the INF chipset driver and VGA driver. In device manager, there's no exclamation mark (!) other than the Killer LAN (driver not installed yet).

Here are some cons/negatives that I've found (not that serious actually):
- coating on the board scratched off when tightening the mounting screw
- usb3 header not facing side-way 90°
- Fatal1ty logo on the PCH heatsink will look better than the robot logo
- user manual shows the wrong memory installation. unlike typical design, only 1 latch can be open/close. need a few try to seat the ram perfectly, else you'll get debug code 53.
- debug code led doesn't show temperature
- power & reset buttons don't light up all the time (remain extinguished after power up)


I hope ASRock (Pegatron) will continue to build great and well-priced motherboards in the future. Please don't end up like ASUS which has turned into a jack of all trade.

My comment for being first time use ASRock its a great board over price ratio
Been experiencing to use many board maker but so far ASRock seems serve me pretty well

ehh most boards don't show temperature on debug led.

and I've not come by boards with USB 3.0 header at 90° either. The boards that reach me (ASRock, ASUS, MSI, Gigabyte, whatever) all have it face upwards.

MSI M series. My old Biostar does show mobo temp (not CPU temp). I'm not sure of current Biostar models as I don't check out their reviews anymore as we can't buy it locally.

Most high end boards (MSI, Asus, etc) have headers at 90°.

This post has been edited by Skylinestar: Apr 4 2016, 08:50 AM

I think I have some model that show CPU temp, if I'm not mistaken it's my MSI 790FX-GD something very high end AMD board during those days.

Other than that one, most boards don't even have LED. Some have LED but they go blank after POST.



Many high-end boards don't have it actually. In fact from what I observed, very few.

Like ASUS Z97 Deluxe, X99-Pro and X99-A, Giga X99 G1 - nope they don't have.









Among those that read me, the only one I saw with 90 degree USB 3 is ASUS ASUS SABERTOOTH Z97 MARK 1



I haven't check the ROG MAXIMUS but I have the IMPACT range, don't recall it face forward either

Please check out the Z170 series.