dose venice run alot hotter then winchester?

i removed IHS on my winchester but kill it, it was doing 30-35 on idle and roughly 50 on load with a max clock at 2.2ghz only. cooling it with a venus12

then i bought a venice e6 and did the IHS remover right away, but im getting 45 idle and around 60 load at clock 2.6ghz but only 1.45v core

thinking tht it is bcos of the mod i did, i put back the IHS (with proper paste between the core and IHS, all orig paste and the ruber-ish thing at the side remove)) but temp when up to 50 at idle and 65 on load and thts 1.375vcore on 2.5ghz only...crap

something wrong with the sensor? i think with stock cooler its not so bad either rite?

tested with coretemp, its 60 max at load with the current clock and voltage, everest ultimate is showing 66 max tho, probably bcos it is reading from bios.

ok, meaning previously with IHS off its actually 54 a 2.6ghz, everest showing 60 at tht time

wow removing IHS give me a 5-6 celcius drop.

but its still high, venus 12 so lousy? even with a 50fcm fan on it.

winchester is so much cooler then compare to venice.

thx.

planing to buy 2nd hand am2 board, i have biostar ta690g and dfi nf ultraII-m2 in mind

whats other mobo good for o/c? will the dfi have compability issue with brisbane g1?

looking for around rm200 2nd mobo

worng info...sorry

This post has been edited by xtorm: May 2 2008, 02:22 AM