try adjust multiplier lower
like 11 or 10, or
set higher vram 0.00x Volt if ur mobo support, or
set higher htt voltage 0.00X Volt if ur mobo support
then push fsb higher 1-5mhz
correct me if wrg

---

Added on November 12, 2008, 5:04 pmwho in this thread use D9GMH ram chip??
can u share ur HTT mhz??

---

Added on November 13, 2008, 9:04 amathlon FX series ade orang pakai tak??

This post has been edited by fathir: Nov 13 2008, 09:04 AM

for 3600 Brisbane can get how far with crucial d9gmh?

this is my oc result....
stable with orthos more than 24 Hours [blend test]
got 2.7ghz stable

proc: brisbane x2 3600+ (stock at 1.9 Ghz)
board: tforce 550 v1.0
ram: crucial 10th anni 2x1GB (ddr2 667)


bios setting:
1. 1.3V Vcore, 2.0 Vdimm
2. 9.5 cpu multiplier
3. 284mhz HTT (284x9.5 = ~2.7 GHZ)
4. 3x HT link multiplier
5. memory divider: ddr533
OR
FSB:DRAM = CPU/8

just want to know u all opinion about this result and also share how to got higher GHZ. like vcore, vram, timings ram and so on
try to get 3.2 GHZ but fail about seconds in prime95.

but they didnt provide full detail.....

voltage for ram for 2.2v is by changing jumper, its not available in bios menu IMO..

what's svid? is it s-video??
noob Q here haha