AMD K8 Family Overclocking (754/939/940/AM2/1207), General discussions and newbies' guide
|
|
 Dec 10 2007, 10:52 PM
Return to original view | Post
#81
|
 
Senior Member
7,173 posts Joined: Jan 2003 From: PCH  
|
firstly, are you overclock using 1:1 or memory divider, if 1:1, there's possibilities that your RAM can't go with your CPU, so that leads to reboot and reboot... IMO, you should use memory divider, try experiment with your CPU, how high your CPU can go, after that (found the highest CPU can go), then go for RAM...
|
|
|
Jan 4 2008, 08:59 PM
Return to original view | Post
#82
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(limsa007 @ Jan 4 2008, 08:18 PM) it work now, no more error, but i need to on it for few hours 1st. btw the vcore i set to 1.725v.... isn't that too high for daily usage? or is it for benching... http://valid.x86-secret.com/show_oc.php?id=291866 thx bro!   |
|
|
Jan 4 2008, 10:38 PM
Return to original view | Post
#83
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(limsa007 @ Jan 4 2008, 09:35 PM) yea.. i feel it high, i try 1.7 but get error, so how? easier le... how to lower down the HTT? lower the multiplier? it's like this... set your mind... finding your maximum CPU clock you can get... set the RAM to lowest speed, say DDR200 with stock timing, the HT Link multiplier instead of 5x, set to 1x or 3x, as long it's in 2000MHz range, CPU multiplier leave it @x11, and start raise the CPU FSB, at this time, your RAM speed increased too, leave it... i would recommend, 10 or 15 increment is good... |
| Change to: |  0.0156sec
 0.37
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 10:11 AM |
Quote