Yeah if there's one with cherry logo i'll be all over it. abostudio's one isn't that bad but I heard the first batch breaks or doesn't fit tightly.
Btw, can you link the gateron one ? I wanna have a look

EDIT : wait nvm. I found it.
http://imgur.com/a/39DS8
These ones ? For RGB purposes I guess its fine
I asked 7Bit @ Deskthority he says he's not bringing it in anymore. Must be something to do with Corsair's agreement with them

This post has been edited by joonwei23: Dec 18 2014, 05:21 PM

i'm not sure in particular for that one you've linked but it doesn't do anything other than aesthetic purposes.
(i.e switch stickers can be seen through which gives it a nice look)

Can get from sprit @ gh.

Oh I didn't know his 55g's were popular, thought it was his 62g's.
Either way I guess ppl like light springs.
I'm using his 62g on a clear switch. It's not fatiguing when you type for a long time so there's that.
For a linear switch, I think it would make it heavier so more towards mx blacks ?

I never specifically ordered springs alone before.
Last I ordered, he shipped it together with my other stuffs.
Well from GH some dude received it a week + give or take after paying his invoice.

It's fine. I always hard carry my keyboards
Funnily, I got stopped once at Dubai's airport when I was transiting to the UK. The lady asked me to open the bag, and she was like smiling at the keyboard.
I was using the rainbow pbt's that time. Fun times.

Yeah, clicky switches are the best but not too light. maybe if you swapped yours with 62g or mx clear springs it would feel nicer.
Just my 2 cents

Really ? I was thinking korean 62g's are heavier than stock mx blue springs. 65 eh ? You tried already ?

Alright, I'll await your feedback for the 65g then.
Haha, I used 62g from Sprit for my MX Clear. It's pretty nice to type on. Not too light or heavy.
Why Trade your green switches ? Too heavy ?

Let me give some of my thoughts on this.
Tbh 60% is really practical at least for me.
The first one I got was a poker 2. Then I got the FaceW from Sprit. I almost got the Nerd 60% as well but I opt for the tkl this time.
The ergonomics is really suitable for me, I don't really bother about the numpad tho so there's that. Gives me another option for a tenkeypad anyways if I need it
And 60% is quite easy to carry around, so there's that

Um, there's no good or bad idea. I've seen people lube clicky switches but sometimes i don't really think it's necessary.
Moreover, I've seen someone lubed till the clickiness of the switch was gone.
I guess lubing is more towards, linear and tactile switches. Just my opinion.

wut... i wanted a ribbit actually but there wasn't any so I just picked something in hoping when I get it, I'll be able to find a ribbit for trade.
but alas, no bots. I think I'm 0/3 except for one bot which I got dibs.

Oktoberfest is the blank cc right ? I don't think there's a F2 version. Not that I know of.
I don't any clacks so I can't be entirely sure. But it was one of the clacks I like at first sight, with julysicle of course.

Ducky has mediakeys
well at least the shine series.

I would say the Ducky if you're into the blingblings. I don't remember the older cm's having leds. I know the new one has it tho.
I've only typed on a CM for a short while but I own a ducky, so my preference leans towards the ducky.

Lel, he tried to fix his mistakes but it seems that no one wants to accept it.

I've read that white switches have inconsistent clicks. So you might wanna take that into consideration.
If you'd like a heavier switch with the clicky feedback then green is your best bet, if not stick with blues.

In any case, just get the pcb mounted switches. You can always clip the 2 legs off at the bottom if you plan to plate mount it.
But yes, the two pins stabilizes the switch if there's not plate. I usually use pcb mount switch even if I have plate, provided the pcb supports the pcb mounted switch.

Really ? I've only purchased my switches from 7Bit. The pcb & plate mounted are the same price.
And that was only because the switches I ordered from mechanicalkeyboards was not delivered to me, for some reason the switches reached the UK but wasn't delivered to me and got sent back to the USA. >_>
Where do you guys source your switches anyways ?

From what I know.
7Bit @ Deskthority
Mechanicalkeyboards.com
GON

Yeap, it does. When I first lubed my clears, I accidentally bend a few pins. Now the switches doesn't have the bump to it. It's not what I wanted but I don't have the tools to change them. lel.
So I have to live with it for now. But beware, like one of my switch I think I bend the metal leaf too much, it doesn't register types anymore.