Why do you need to hold it using duct time (i guess inside) as the tinting is holding it. Feeling like trying to do a DIY on fixing the crack.

No idea on what model they use, but if you want to redo it, why dont you get better ones's. I know it's more expensive but definitely better heat reduction.

for me is a small stone, as i heard the stone hit, then follow by the crack sound

only noticeable if look closely as there is a small chip at the start of the crack

This is how my wind screen looks like


Attached thumbnail(s)

Yes, for me as i can see the stone chip on the windscreen that started the crack

only used Ron95 and mostly city driving, only once full highway back to penang.

Used Shell 95 and Petronas 95, dont see the difference, in all terms.

Price of stiff ring:

RM240 front kit, RM260 rear kit. Installation at our HQ Cheras is RM70 front and rear.


I have just install Ultra Racing Bar for the Front and the Back, on the drive out I felt the difference of the car comfort, not like the stock. It's always either performance / stability or comfort.

Nope, dont have this problem.

Same as mine, not it will not even go higher than 580. But i know that even i drive for 30+, it's still stay at 580.

When back to hometown, Penang on the 23rd (night drive) and 29th (afternoon drive). Average speed of travel is between 140 - 160. The car is with 3 adults (including myself), a toddler and full load of baggage on the back (take down the seats on the last roll)

This is the first time I drive the car in this state and I love it. The car felt stable on this high speed and still comfortable overall (only mod is UR front and back). The only thing don't like is the engine noise when at 160 (more than 4K rpm) and the fuel consumption, as didn't expect it will take that much.

Now the car felt light and smooth when slow accelerating and the reverse doesn't felt like before, need to accelerate hard to move the car. Car just reaching 10K and will do the service before CNY, hope that will make the car smoother and better fuel consumption.

can anyone help to provide what type of bulb or type of lightning that use for Exora on every part of the car?

anyone using car cover? can provide brand, location of purchase and price, as weekend car, always collecting dust at home.

Saw some at Lazada brand A1, but not convince as MPV and XXL size same only.

Just done my 10K service yesterday and this round using Petronas Full Sync 1000 and the car felt very different. Dont think its the engine oil, guessing something to do with changing something in ECU, as the throttle felt really, really different lighted and lower rev.

Look at this link for the ABS sensor light fault - http://muhrifnogore.blogspot.my/2015/03/re...ala-proton.html

On the OCH issue, the information I understand is that the new replacement part from Proton do install to some models and years of the cars. I haven't check on my car, as mine it's 2015.

More info - https://www.facebook.com/photo.php?fbid=171...&type=3&theater

thanks, but is it too much to ask, if there is a download version ?

think this is the same as the changing the gear box mounting. Posted a video on this before on this thread on the sound when releasing on pace.

Yes, you can change back to the foglamp or you can make the DRL run permanently even with the main headlights on, this is what I did.

The foglamp give you better lights as you can change to what ever type of light you want (normal bulb, LED or HID)

This post has been edited by KidsCode: Feb 29 2016, 02:40 PM

GM all,

Would like to check if anyone have any information or idea on how disable the passenger seat air bag ?

Want to check if anyone able to get the SC to change the OCH that is under 40k mileage?

Also is the news / rumors correct when there is a different / 2nd generation of the OCH that Proton is changing now ?

Aiyak, mine is just 20K

I know it's not for all, but those with newly purchase of 7 years warranty, turbo failure should be under Proton, right ?