selling my modded L1 Cree here - http://z3.invisionfree.com/MY_CPF/index.php?showtopic=668

The Olight next to my EDC

---

Added on October 13, 2008, 1:09 pmi can mod the light for for a fee using this drop in module + the SSC P4 led USWOH



it will look something like this and can throw up to 500 meters DD with 3xD cells



curently i already mod it to Quag Cree Q5



This post has been edited by surefire v LED: Oct 13 2008, 01:09 PM

Novatac ugly! hmmm you should hold it in your hand .....
and let alone the beam modded with U2SWOI & U2SVOH respectively.......

That is my jacket made of GoreTex textile.
I got my novatacs from o/sea.

just got my new toy
The NiteCore Extreme on a E2L body power by AW 17670 for a long flat runtime at least 2 hours on high.

you can get the new KX2 head either in black or in desert sand brown and get a whopping 120lumens - http://www.surefire.com/maxexp/main/co_dis...1/KX2C-LED-HEAD
and sell off your E1B head

Try it and you will fry the circuit and void the lifetime warranty

selling off my Novatacs

http://forum.lowyat.net/index.php?showtopic=847923

tong1774,
My L-mini is superb with UCL and i did change the diver to higher current from 1A to 1.2A and the output is SUPERB !
Got to sell the novatacs - it is a superb tank light and very2 small but after swapping the LED it is much brighter and warm tint.
Need some money la bro

sori - i'm not selling it because this L-mini is the best 1x18650 cell light for the price.
the L-mini brass heatsink is better than the Fenix P1 CE brass heatsink.
It is not so thick but so solid - it will not go out of shape if you hit it with a hammer

mine is version 1 black becoz i like single cell set up.
why don't you send a special request PM.
asking like this - "can you swap the light engine from the silver host version 1 to the black host of the Version 2 due to i like to have a black host single cell set up"
just an idea

something like Fenix's

[quote=celeron504,Dec 29 2008, 01:10 AM]
Solarforce L2 looks kinda similar to Sure Fire 6P which is selling at RM400+
It has the following specifications.

1. Utilizes a Cree R2 7090 XR-E LED with a life of 50,000 hours
2. Provide 300 Lumens Output
3. Digitally Regulated for Constant Brightness
4. Uses 2 x CR123A 3.7 Battery (NOT included) 13cm (L) x 3.2cm (D)
5. Made of aircraft grade aluminum
6. Durable is ensured which is made by aluminum
7. 98-gram weight (excluding batteries)
8. Toughened ultra clear glass lens with AR coating
9. Press the end switch to on/off the flashlight (Reverse clicky)
10. The Non_tatical Head & Switch is compatible to Surefire 6P 9P G2 Flashlight

My opinion, if you are looking for a Sure Fire 6P compatible flashlight, solarforce L2 is a good choice, I ordered from Ebay.com for USD$29.90 (included shipping and it reached me after 1 month of delivery from Hong Kong). Construction is good very detailed, it doesn't look like those cheaply made in China flashlights. Not type III Hard Anodized, but overall quality is very good for the price you paid for. It is bright, tested on Tesco CR123 3.0v x 2, it throws 200 meters (rough figure as I dont have any equipment (GPS) to test with).
With CR123 3.7v x 2, it sure throws further as it is powered by CREE R2 up to 18V. LED is center aligned, I dont see any off centered alignment.

Attached Solarforce L2 photos.

review http://www.light-reviews.com/solarforce_l2gs-r2/


i disagree on point no.2
refer here - base on "Actual Lumens readings in 6" dia. Lab Sphere IS with SC 5500 control "
http://spreadsheets.google.com/ccc?key=pIh...ezKYVu9XmK3dpYg

Get a custom modified maglite with P7 emitter or Cree MCE emitter with a good driver that can pump it up really well.
http://www.britelumens.com/custom_maglites

nothing new to me.
bear in mind it's custom made with good heatsink/good emitter and good driver.
and GOOD out the front LUMENS

anybody want a JB with quad cree

my 3 pieces Cree R2 WG from DX.
Waited for a month for these 3 R2 back in October.
They waited patiently in my drawer ever since it's arrival.
Now it's show time

R2 in my Elly host with Dereelight driver 1.2A + 19mm McrXRE + UCL


R2 in my old school P2D & P1 CE (now with R2 )


Elly host AW 14500 (2 feet from the wall)


P1 CE R2 AW rcr123 ( 2 feet from the wall )


R2 P2D AW rcr123 ( 2 feet from the wall )

thanks.

yes,it's never ending story as it is addictive.

---

Added on January 13, 2009, 11:44 pmno heat issue here despite them running with rcr123.
but the hotspot is much2 more intense compare to the Q5 despite the R2 equipped with the WG tint.
I have tested the P2d R2 running it until the AW 123 shut down and i got 45 minutes,of course i wrapped the P2D with wet towel.
as for normal use running it continuously is fine as long as you hold it so that your palm will take the heat away.
no colour shift with my R2's

This post has been edited by surefire v LED: Jan 13 2009, 11:44 PM

Finally managed to put the SSC P4 emitter on this HS - http://www.candlepowerforums.com/vb/showthread.php?t=216656
Pictures

Terralux Cree P4 drop in ( UCL + Fraen + Kroll tailcap +2AA alkalines ) vs SSC P4 (Novatac poly lens green coating + Terralux tailcap + Terralux reflector + 1 AW14500 & AA dummy )


normal shot


EV -2.0


in real life the SSC P4 is brighter.
And now it's time to put some reliable driver in my direct drive Mag 2D Cree MCE
Thanks for lookin'.

This post has been edited by surefire v LED: Jan 21 2009, 03:33 PM