got mine today( actually it's for my wife but i think i gonna have to swap with her with my LF5XT )
my LF2XT is much2 heavier but the TL-1 is brighter.
some photos and beamshots
i like the feel on this thing while holding it despite it being lighter than the LF5XT.







LF5XT R2 on the left vs TL-1 on the right ( both on fresh eneloop )


EV -2.0

Fenix TA 30 is coming - hu hu........

i think i gonna stop for a while.
i will be out of job soon......

some photos please

just got myself a Malkoff drop-in module via a trade in CPFMP.
Wow! what a solid module and man was it bright that pouring out 245lumens out the front!

---

Added on March 13, 2009, 9:01 pmJetBeam Raptor anyone
Nexro it's your call











This post has been edited by surefire v LED: Mar 13 2009, 09:01 PM

here is the comparison between iTPLight C10-T that already swapped the lens & reflector to UCL lens & McR17mm XRE and the Eagletac P100C2.
The C10-T is always on the left.Both on fresh AW rcr123.


-2.0 WB is set to auto.


-2.0 WB is set to daylight florescent.


the iTPLight C10-T with UCL + McR17mm XRE is not that shabby at all + with variable brightness setting

on which f/light?

no donut hole in the one i tested.

can you tell us how do you get 1.3A current draw to the emitter?

i thot the eagletac is driven with 1.2A current to the emitter :-

C1200 LED Driver

T10C2 features C1200 digital LED driver that matches two lithium or li-ion batteries output with the LED power requirement. C1200 driver boosts and manages battery output voltage and current consumption constantly to provide super-flat light output. Unlike other LED driver, C1200 provides constant regulation and flicker-free output regardless of the brightness setting. C1200 LED driver is the most advanced, yet rock-stable system available for two lithium and li-ion cells EagleTac application.

just finished swapping driver & emitter on my brother's Lumapower MRV.
what a relief.
good throw with that 1.2A driver from Dereelight.
not to mention the brightness.
still waiting for the Flupic to arrive.

This post has been edited by surefire v LED: Apr 4 2009, 09:31 PM

finally my driver arrived - http://www.dealextreme.com/details.dx/sku.20329
install it in my mag 2D with Cree MC-E & WOW what a strobe!
The cree MCE on strobe really a phenomena

here is my Mag Cree MCE.
The business end is ugly but the beam is awesome
Lens is UCL blue coating.
Reflector is from Kai Domain.
Powered by 2x AW C li-ion cell.

JB RRT-2
http://www.cpfmarketplace.com/mp/showthread.php?t=195864

yup better lookin' than the RRT-1,good enough lookin' to me in order to heal the urge in getting the LX1

one can get the M60 shipped to Malaysia for additional usd$6.50 - http://www.uniquetitanium.com/ShippingCharges.htm

quark quark quark

the ano is as good as my the EagleTac P10A & better than the EagleTac P100C2 which the P100C2 is easily chipped (at least on mine YMMV)
this one is tiny for an AA size f/light category.

Yup, definately a good light,should sell well here because :-
1.the quality
2.no ringy beam
3.the tint is on the warm side
4.it's bright on normal AA ( though the P10A is brighter due to larger reflector )
5.it's really low on moon mode on li-ion,you don't loose that moon mode unlike Fenix where it goes DD with 14500.
6.it's tiny in hand for an AA f/light.
7.solid and sexy
8.can use 17670 cell with 2x123 tube ( i will wait for you polkiuj to bring it in )
9.really nice MOP reflector nicer than the McGizmo reflector 19mm
10.nice runtime on Hi with 14500 as per selfbuilt.

but you have got the Ellie