This thread wont die.. more and more ppl using Biostar now. I also migrate from Gigabyte to Biostar one actually.
Hows your new mobo?? 2 weeks can get back? So fast!!
The 12v rails reading? Yes, pls.

Wht RAM? your E64 so powerful alrdy.. can reach 3.8GHz.
The new BIOS can help me to reach 410 FSB.. but not too stable.. pumping 1.8v on vCore. No feeling good bout tht. Better stop at 405 FSB. Just wanna get Super PI under 14Sec then satisfy alrdy.

This post has been edited by yehlai: Jan 30 2007, 06:43 PM

yeahh, biostar become 1 of best budget c2d mobo currently. i believe more & more user will get this superb mobo
i still not yet have the chances to get my hand into it.. hope to see more g00d result from u guys

ps: 1.8V?? u sure kiddin rite?

Now so far is 407 x9. Super PI = 14.015 sec. Quite stable.
But vDimm 2.2V only, so my RAM cant go beyond 1000MHz. So pity.

Yes.. 1.8v is the max alrdy.
Now set lower.. dont dare to put too much vCore.

dya run stress on ur setup? or just simple pi calculation?

Yes only for Super PI. Get the reading and take snap then finish job.
For daily use i only run 3.22GHz. Moreover dont want to stress it, becos its almost impossible to get stable setup at 3.6GHz. No time also
But i think most of the E6600 overclocers here o'c with >1.5-1.6v vCore, becoz i saw their CPU-Z screenies, the vCore is 1.213v. Actually its a bug from CPU-Z. When if the vCore set too high then the CPU-Z will show 1.213v one.

This post has been edited by yehlai: Jan 30 2007, 10:05 PM

when u set 1.8v in bios...what is actual read in windows??? it must be below than that rite...

IIRC its 1.213v
But i dont dare to run 1M or prime it. Just o'c to take snap.. not 24/7 usage.
Set vCore to the max is very scary..

1.213v kira ok lorr if compared with my c0mmando.. i put vcore 1.4v & when it come to cpuz, the reading was 1.056v really nice rite?

ps: already try with 1st bios, 0702 & 0801

This post has been edited by gengstapo: Feb 2 2007, 12:03 PM

maybe new version of cpu-z will fix the voltage bug...but until now..no new release..

Alrdy try the new BIOS? Its really good and im satisfy with it.
BIOSTAR geng should use it.

yehlai.. hav new bios r.. newer version of P96ca103??..

if u want newer bios then download this... it's the custom bios by rebel's haven which is based on the p96ca119 beta version....

new bios P96CA119rh2 link

Yes, d/l from here http://forum.lowyat.net/index.php?showtopi...post&p=10210251

i tried both b4, but rebel's haven one is better for o'c.

Hello

I just buy 965pt to pair it with nakata 6600es (u all poison me)

So any headstart for me as im new in oc.

my spec is
e6600+965pt+xp90+Icute450+1gigApacer ddr2(BZZ chip)

Dont o'c with i-Cute PSU. It might burn ur mobo.
Even if u o'c it too, u cant achieve stable clock or cant o'c too much becoz PSU rail is not stable.

This post has been edited by yehlai: Feb 4 2007, 09:14 AM

damn nice, ehh ur psu worr
later might burn all ur precious rig, IMO

i got cm xtreme 380...izzit ok?
y fren oc his x2 with icute no prob.

Btw i dun want to oc like kvm la

oc till 2.8~3 oredi enuf

3GHz is impossible for iCute. I was i-Cute user b4.
Not worth to take risk.

Sound like very weird"Nakata 6600ES"...
I never use Icute pws b4, how much u bought this pws, if u in budget under rm170, maybe u can get a pws like me using now, u can refer my Signature....

nakata now got his own title for c2d...