QUOTE(randytsx @ Apr 18 2015, 02:48 AM)
I see what you mean.
So, only the backlight portion of the LCD display is turned off but the LCD display on the whole is still working.
There is no backlight and you can't see anything unless you shine some light on it, and only when there's enough light reflected off the screen can you barely see anything, if at all.
But shouldn't we just consider the screen to be turned off since is it even possible for any laptop with such an LCD display to have the display turned off completely, instead of just the backlight, while the laptop on the whole is still turned on?
More accurately, it's not dimming or turning off the screen, but turning off just the LCD backlight.
Mine runs at 55 degrees C on idle.
QUOTE(Eyuna3 @ Apr 18 2015, 11:49 AM)
Mine one same like brian and get frm illegear.
Normally the temperature will be 50-56, during gaming can up to 65-71
I found out the problem, it's the laptop cooling system itself. Now my crucial is at about 55C when idle. The mSATA 2 slot is kinda hot by itself that's why the SSD is overheating, now I've replaced it on mSATA 1 which located in between of the fan, and adjusted the harddisk setting. For those would do not have HIPM and DIPM setting you may follow these steps.
On an average laptop, this will help you save about 7%-8% of battery life. On a desktop, you'll feel greener!
» Click to show Spoiler - click again to hide... «
It's simple, swift & safe:
1. Run Registry Editor (type "regedit" in the search field on the Start Menu).
2. Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-a2a1-449c-9680-f91c70521c60".
3. Change value "Attributes" to 2. At this step you won't have modified ANY functionality in Windows (except for a tiny detail in the power management USER interface), so it's 100% safe.
4. Reboot.
5. Now go to "Power Management" in Control Panel and click "Change plan settings" of your power plan, then click "Change advanced power settings".
6. Expand the "Hard Disk" settings tree. You'll see that now there is and ADDITIONAL setting: "AHCI Link Power Management - HIPM/DIPM". Expand this one.
7.1. If you have a LAPTOP: change "On battery" and/or "Plugged in" to "HIPM+DIPM" as you like. Intel recommends that DIPM be enabled at all times for its SSDs. If that's your case, change both.
7.2. If you have a DESKTOP: change "Setting" to "HIPM+DIPM".
Voilá. There's a small impact on drive performance (which I could only notice after running a benchmark). My system "felt" quite the same.
-Credit to Whammamoosha from another forum-
This post has been edited by Cloud2322: Apr 18 2015, 05:24 PM