any luck?

try refer here... http://thejimmahknows.com/multiple-access-...g-openwrtpart1/

to critters, your link doesn't help becos this router doesn't have the GUI for switch according to thread starter.

I think the first thing to do is to find the port no.
port 0, 1,2,3,4,5. Need to verify which port is CPU port, some switch is port 5, some is port 0, without this info it is not possible to get the tagged and untagged correctly.
Is this switch controller used in other openwrt compatible router, if yes try to find the corresponding port no first. From there only we can start testing on tagged and untagged port.

So was there any successful configs yet ?

hahah I bricked my router when flashing third party firmware ....
their official forum (in chinese) doesn't really helpful, if you bash their product some of the nasty moderator will delete your thread and/or ban u.
so far no response on the official forum, I'm checking on other router modding forum.... they suggest I use the TTL/jtag cable to connect or even remove the flash rom and flash it ...
i'm not a hardware person so temporary put that on-hold until I found someone who could jtag for me

may found a solution tho, I'm now running tomato firmware on another router, able to vlan tag WAN port and no problem connect to Unifi
if my router ever come back to life, I know where to get a modded tomoto firmware for xiaomi r1d, and should be able to connect to unifi

Sorry wasn't follow this topic for awhile ....

mghong:
thanks for the commands, but xiaomi router doesn't come with vconfig command .... should be default to broadcom chipset but their "customization" restrain DIY fun... darn it

This post has been edited by LickGuy: May 10 2015, 04:47 PM

Have you try the latest Chaos Calmer. Seem to support Xiaomi Mini and brcm47xx chipset.

This post has been edited by DE.si.MON: Sep 30 2015, 02:30 PM

any updates on who's config works ?