Hi guys, need help... Can I use G skill trident z on my Asus Prime A320m-K motherboard and have full control on the RGB effects via Gskill software?
AMD (Malaysia) Official Thread
|
|
 Jan 11 2018, 09:07 AM
Return to original view | Post
#1
|
 
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York   
|
|
Quote|
|
|
|
|
Jan 11 2018, 01:18 PM
Return to original view | IPv6 | Post
#2
|
|
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York
|
QUOTE(zaaba @ Jan 11 2018, 11:23 AM) Isn't Trident Z Asus Aurasync compatible? You might want to check that, especially if your board supports it. My board is not Asus Strix model.. doesnt have support for aurasync. |
|
|
Jan 15 2018, 11:48 PM
Return to original view | IPv6 | Post
#3
|
|
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York
|
Hi guys,
First time doing OC on Ryzen 5 1600 with my new motherboard, MSI B350m bazooka. Here are the results, able to get 3.8ghz at everything Auto, can see the voltage at 1.264. Is this voltage too low and unstable? Temperature after 10minutes AIDA64 is stabilized at 71c. Cinebench CPU score is 1222 at 3.8ghz Do you think can go higher wit everything Auto (voltage)? Thanks! 
Update: Crashed after 5hours+ What may seem wrong? Could it be temperature? Or voltage? Now trying to set at 1.275v through BIOS, going to run some tests again. However my HWmonitor keeps showing at 1.3125 only even my BIOS CPU core voltage set to 1.275.. isit because BIOS auto set to 1.3125 after previous crush on 1.264? 
This post has been edited by Michaelbyz23: Jan 16 2018, 09:43 AM |
|
|
Jan 16 2018, 03:41 PM
Return to original view | IPv6 | Post
#4
|
|
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York
|
QUOTE(fuzore @ Jan 16 2018, 01:27 PM) my 1600 tested on stock speed all default setting and boost turn on to 3.7 also hit 70-71c on prime95 and aida64.. donno if i overclocked gonna hit what temp My latest after 3 hours stressing at aida64..GPU also stressed just to see the temperatures of motherboard and cpu. 
|
|
|
Jan 16 2018, 09:15 PM
Return to original view | IPv6 | Post
#5
|
|
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York
|
QUOTE(fuzore @ Jan 16 2018, 08:31 PM) wow that temp on 1.3v hopefully the 20-degree temperature off-set also includes our 1600, below is when i ran prime95 last time on stock speed How long did you run? What is your cooler and case? [attachmentid=9521802] Mine is because I stress everything including gpu, hence they temperature. I think is fine. Currently on 240mm aio with cooler master masterbox lite 3.1 This post has been edited by Michaelbyz23: Jan 16 2018, 09:19 PM |
|
|
Jan 22 2018, 08:05 AM
Return to original view | Post
#6
|
|
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York
|
QUOTE(Legendary Big Boss @ Jan 17 2018, 07:48 AM) 90c test is not fine. Although actual real life would be lower than that. Try find the sweet spot for long term usage. Upgraded my case.. currently this is my temperature after almost 9 hours aida64 both gpu and cpu.QUOTE(fuzore @ Jan 17 2018, 09:36 AM) i didn't ran it long only an hour... its on frostflow+ 120 aio inside a tecware quad... Nice one bro.. I just upgraded my case to fractal design define mini C TG, temperature improved so much.[attachmentid=9522828] 
|
|
|
Mar 1 2018, 02:58 PM
Return to original view | IPv6 | Post
#7
|
|
Senior Member
4,546 posts Joined: Jun 2009 From: Selangor / Sarawak / New York
|
Waiting for 2700 series to be launched.. Hopefully can overclock to higher clock speeds.
My current 1600 cinebench scores and temperature: Running at 4ghz, 3200mhz 
|
| Change to: |  0.0608sec
 0.55
 7 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 10:08 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.