Can whos teach me how to hiding the wire? will update the new pic later..upload the rig picture 1st.

This post has been edited by ayu: Aug 29 2006, 07:37 PM


Attached thumbnail(s)

This is a finish rig~~~but haven't finish the wire management~~ will upload the pic later also.


Attached thumbnail(s)

u really shouldnt have cut a window on the sidepanel on the mobo side.... u could have used that space to hide all ur cables by rouuting them there and zip tie them to the bays.... now if u put them there the cables will still be obvious....

best way for u now would be to hide them in the rom bay or hdd bay...

mayb he want to put some colorful LED/UV lights to add some spice to his rig haha..

well for tat u have to sacrifice abit of neatness.. for me i would do his way also.. oni way to make it tidy is to gather up the wires properly and use cable ties..

u can't really hide them all away. but can minimize the obviousness of the wires hanging over everywhere..

place ur HDD cables aside. . best is u could place wires away from them n not overlap them.. will look neater tat way..

I upload the pic after complete MOD~~

Hi, just now only can upload the pic..im using the w800i to capture..the pic is not clear at all.Just want to know how to hiding the wire?

And give also opinion on this RIG..TQ I bought this RIG RM70 at last few year,
I MOD this RIG my self.

This post has been edited by ayu: Aug 30 2006, 02:35 AM


Attached thumbnail(s)

truly ghetto!

Oh...TQ...will i get a grift? hahaha... sure is ugly ma.. abothen u mod free for me lah..lol
Now i want to know how to hiding the wire only..

This post has been edited by ayu: Aug 30 2006, 11:48 AM

problem is ur main atx power..in the wrong position..

Here's a hint:

Let the wires show BUT organize them in such a way that they 'flow'
It's all about where the cables are going & how you take them there, get it?
If possible, sleeve all cables en-route to the same location together.

Gees... it's kinda hard to explain, but I hope you get the idea.
Sorry I can't give you a sample, I neither have an example nor could I get one now Sorry...

i have absolutely no idea what you just said dude.

easiest way is pay ianho to do it for you, heh

Me neither Sounds very much like English, but encrypted with some high-technology cypher mechanism...

Regerding the cables, IF you're from Malacca, I *might* be able to help.... at a fee of course

1st of all, u terbalik ur psu 1st...
coz its in the wrong position i think
then the cdrom, put it at the highest slot...
so that u have more space to hide ur wire
put ur hdd further in the hdd slot if can,
and for those fan wire, make it longer, sleeve it and hide it around the sidepanel, so that its not hanging around..

the PSU is in the right position..... its just that the cables are on a diff side than usual... my guess is its a chapalang PSU... coz i have a chapalang PSU which also has the cables on the same side

wow..wat a weird PSU layout then... ayu, wat a number of tentacles u got in ya casing... Daemontentacle, come here n help pls~.. anyway, as GoldenHawk suggest, try to group each n every tentacle(lol~) withing a route... lets say, those tentacles to HDD, cable tie them as one... next is those tentacles to 5" bays or fans...

woah dude, ur case is very hide to hide the cables de.
u cud always frost the top of the case, and then hide the cables in the bays above the cd rom.

of course, there is always ianho, im sure he will do a very good job.

there is always cable ties..may help a bit..

Actually u shouldnt hv cut the other side of ur side panel.
Thats the place u can hid all the cables nicely.

I m trying to hiding the cable now~~~ will upload the pic soon.. try u all way to do 1st...

My PSU is right position now..lol..maybe im using the bad normal PSU
I think i have no idea also..

Friend..if i got money ..sure i will go buy a new casing and let the ianho do it..but im no have much money and i gonna want to try MOD my self. nothing to do.. so free ma.. lol
Im from klang..sad..
I was try to terbalik the PSU, but cannot ( masuk ) lah..if terbalik the PSU.

You are right man~~ that is chapalang PSU~~lol.

Now the problem is my PSU wire so short~~
I was try it just now.. wire tak cukup pajang..shit.

Will try cut which place is free ~~

I need to ask... what casing is that? REALLYYY tall just the way I want a casing to be... how much did you pay for it?

I think no have this casing edi..this is a Paling Chapalang and cheap casing... easy bengkok 1 ...When i cut the panel..easy bengkok...RM20 for modding the casing.

I let you mod.. You have to pay me RM20 .. ok?

Lol.. since i design the MOD look ugly and getto..but don't think my kung fu is palia 1 lah..lol

I really like GoldenHawk's idea.
Btw, like others said, I think you shouldn't cut the other side panel. However, it still can be rescued...

my cable also very mess....i aldo dunno how those people hide it untill so clean....

Maybe my casing is ( chapalang ) casing, i think that no free place for cut the side panel edi. Any picture to show? might to try

Yalah, that's why i ask the question here.

Hello, ISsit i change my PSU to better 1..dhen can hiding the wire edi>?

There's a lot of cacing's inside your case...

No threadstarter...
Hiding cables doesn't have any connection with changing psu...

U should have hide the cacing's in many places inside u're casing...
Beside the 5.25bay...

In an empty 5.25bay...
Anywhere that you think is possible...

depends on the person... some people prefer short PSU wires because its easier for them to manage... and some people prefer them long.

i personally prefer them long.

Prefer long lor.. Who knows in the future needs it..

hi..can i ask..how much u pay for those blue blue cable for ur wire management? around how much ah?

5.25bay mean beside the CD ROM there??
Ya.. my PSU wire is short ..need to make the PSU wire to long .
Yeah.. im 1st time to do it.
RM30 for the PSU ..without the connector.. all the cable and around RM110 .. buy from moderno.

Issit change the PSU dhen can hide the wire edi?

Ayu, for now the easiest way to hide your wires is by sleeving the PSU, changing your IDE to rounded IDE. Try drill a small hole on top of your panel and attach a wire tight to hold up excessive length for your psu cables.

Will try it ~~~ But i think Need to change PSU also..coz the PSU wire output place is wrong..coz this is a chapalang PSU.

go n buy a new PSU lar... got ppl more campalang casing then u lar...
note: not me...

can hind wire behind ur bomo tray..
can oso hind beside HDD n CD-rom Bay..