Red for gaming is a hype, all switch will work for gaming. Its down to your preferences. Have to test at shop

is green mx around 65g or 68g-72g? Im in for 1 set

Alright, count me in for 85g ss spring, just inform me if the payment need to be made

Have you found any? Most company that i ask for laser cut seems to be ignoring personal project. Even the previous 2 company that send me their quotation havent replied anything for my production.

Pcb is the issue I guess. Need someone familiar with pcb tech and design. As for led i manage to get fn layer to work, and can adjust that for whole mkb led.

Only that all layer fn led burned after few days except capslock, all with 330ohm resistor. Maybe serial + parallel connection requires different resistor placement/power.

I've manage to get my case into production today, the total price was RM141.50 (1.5mm aluminium top, 1mm bottom, 3x3mm acrylic layer in the middle) at SC lasercut. If you find other company quotation quite high, try Sc Lasercut because seems like that the cheapest company I can find so far. But have to go there directly because they seems to be slow in replying email.

This post has been edited by faridr: Jun 17 2014, 04:35 PM

With materials, if you want all aluminium, its around 170+ i think

Should be done by thursday or friday, will update you on that

zennasyndroxx I remember that you ask about cnc milling, try asking Mr Ng Kah Weng 019-3318728, because there's limitation and few changes need to be done if you want cnc milling. Better if you speak directly with him incase you have more question. He's friendly

Here is the file I send him

Edit: just mention my name, farid, so that he'll know what it is about

This post has been edited by faridr: Jun 19 2014, 06:21 PM

I gave it a go for nearly 2 weeks, but end up back to keyboard with arrow keys. Navigating text editor with poker2 just seems unnatural to me
But playing cs: go on it is good due to smaller size

Hopefully tomorrow

Is corsair really bad other than dying led? the build quality? I'm kind of corsair fanboi when it comes to power supply, no idea on the peripheral

Not really poker2, more of diy poker 2 clone. Still using it, alternating between 2 keyboard

I know matt30 did a pcb, but wasnt it a simple pcb? The teensy part still have to be handwired manually. I might miss his other project, he has toooooo many project. Anyway maybe he's busy or something, he used to replied to me quite fast last time.

Aristotle cherry clone, similar to blue, but in the process of making new one with cherry clear, poisoned by 016

Suppose to be heavier and more tactile, joined hmwgbworld spring gb just incase I find it too heavy. Try asking 016 if you need mx clear. His price is better than ebay price

Just took my case, open and check. Sh** should have check at the shop, was in rush to beat sg buloh rush hour traffic


The cut is good, because accordcing to matt3o, the cut tolerance might be different with different machine. Some of his case were a bit loose due to different laser cut vendor.

My complaint, really SC Laser Cut? Should have check on the spot instead of trusting you guys.

Laser burn on acrylic


mmm......



Scratches on aluminium plate, there's more actually.

Overall, its ok, but would have expect a much better finishing. Guess cheap comes at a price. Maybe I'll send it for polish or powder coating or something.

Here, still limited by my 2 years old phone


=========================================================================


Maybe i'll add more scratch using sandpaper to fix the scratch, brushed aluminium look.
SC going to replace the burned part, but have to wait till monday, for aluminium, I actually have to add the option for polishing. They should have told me that earlier though.

Other than that, the case is really solid, no flex at all, so will work with or without pcb

And if anyone want to give it a go, maybe try with another company. Ng Kah Weng from khoo wang or thye hong technology (he uses gmail, so not sure which of these 2 company) seems to be more friendlier and helpful, called me a few times to ask about my drawing. Though I didnt use his services because its in Kajang, too far

This post has been edited by faridr: Jun 20 2014, 06:43 PM

I dont have pcb to test since I dont plan on using one, but I think it should still be able to mount nicely because the plate thickness is the standard 1.5mm. Need to add pcb standoff though. Here's the view from side to give you clearer idea

That, I have no idea.

I think you cant with poker 2 stock plate, have to desolder. I dont own real poker 2 so I might be wrong

Mesti lower rated