Anyone have any experience from below workshop?
Any advises? plan to change mine timing belt kit + water pump?
Check for a few brand include Gates, Bosch, Mitsuboshi (OEM Proton)

http://www.mudah.my/Timing+Belt+Proton+Campro-23645808.htm

Im from Subang, usually will travel around Bangsar/Genting kelang too.

Yalor, cheap rite? plan to arrange appointment for it.

mind to share the brand for the water pump?
I was quoted from airline Gates brand instead.

This post has been edited by XCloudz: May 20 2014, 01:20 PM

Recently my radiator acting weird.
I need some professional advice, hope anyone can assist me.

Yesterday after work, found that the water reserved tank beside the radiator is full,
I usually practice to top up the water level to half only (which is the full indicator in the middle of the tank)

Then when i open my radiator cap, could not see any water in it.

What could be the problem?

I need some advice on the steps to refill the radiator water.
While engine cold and off, top up the radiator to full then the reserved tank to half?
Or while engine cold and turn on, top up the radiator till no bubble and the reserved tank to half?

Haha, i will do more survey meantime using this way 1st. LOL!.

Wierd problem is side tank usually i fill half, just found it wierd why suddenly it become full & radiator when open cap cannot see water.
Temp still ok, just to prevent before it got worst where i had once when radiator fan not functioning at optimum speed.

Any idea on the price for a ori master brake pump n labor cost...spot leakage below master pump on the servo cover...

Icic mine AT and non ABS i guess, dn see the ABS label on left dashboard.

leakage as below...


could not find any workshop open today...not choice but to wait tmr...

anyone can recommend any workshop around subang n genting kelang to change my absorber...i ask around mostly quoted 150 labor for front n rear...n one in usj height 100 but not free this week...checked online mostly 80 to 100 buck...appreciate if anyone can advise...

Thanks, will check out this shop.

Understand that gen 2 stock tyre is 195/55/15, but can it fit 185/60/15?
Other than slight diff for speedometer, will it damage the car? E.g. full load will hit the fender?

So can i consider Gen 2 standard setup, can use profile 60 tyre?

Thank for the info, no wonder i heard newer proton car e.g. persona is using profile 60 tyres.

Just wondering possible for Patco to used Sanden filter? as i heard Sanden filter was washable.

So if i put a Sanden filter into Patco system, the filter will get stuck?

Anyone could enlighten me on how to spot fake EO? For example Shell Helix Ultra 5-40W or Castrol Magnatec 10-40W.

Those selling to carrefour confirm authentic? as during promotion 10-40w EO selling as low as RM89.90.

Hi All,

Need some advise.

Summary;
This morning kena bang from the back, was loud but Gen2 butt macam strong no crack, just calar and number plate break, the other party agree to bank in a consider small amount of money quoted from the paint shop, so no police report made.

Till now not yet bank in, should make police report? should get him to sign a letter as agreed to settle privately? Or some SMS message as prove will do?

This post has been edited by XCloudz: Nov 16 2014, 04:41 PM

Noted on your advise. Thank.

This post has been edited by XCloudz: Nov 17 2014, 01:57 PM

It about time to change 2 of my front tyres, mostly this coming weekend.
Need your professional advise on the following tyres,
Upon doing some survey, it seem there are plenty of choices available for the range of RM130-RM170.

Kindly share some comments or advises which one is more preferable.

Appreciate it!! Thank!....

195/50/15
RM130 - ACHILLES ATR SPORT

195/55/15
RM145 - BRIDGESTONE ECOPIA EP200
RM150 - HANKOOK OPTIMO ME02

Removed below:
RM135 - FALKEN ZE522
RM170 - YOKOHAMA PARADA PA01

RM145 - BRIDGESTONE TURANZA ER30
RM165 - CONTINENTAL CC5

This post has been edited by XCloudz: Dec 4 2014, 11:31 PM

May i know how much it cost?