1.5v is standard actually.. many c2d really perform from 1.45-1.5voltage..

3.3ghz passed dualprime for 12hrs with dual super PI 32m running at the background for the last 20mins. .

3.3ghz @ 1.34vcore
vfsb 1.5
nb v 1.6
vdimm 2.0



update: 3.4ghz @ 1.34vcore dual PI 32m passed!

This post has been edited by irenic: Sep 18 2006, 02:24 AM

3.44Ghz @ 1.34vcore failed dualprime after 1hrs 57mins~

now priming at 1.36vcore.

i woke at 12today! haha luckily all classes cancel today..

i hope i can get it stable at 3.44ghz @ 1.36vcore, then 3.5ghz @ 1.375vcore..

and that will be my 24/7 setting

This post has been edited by irenic: Sep 18 2006, 02:17 PM

no offence, but what r u talking about ? 1.36 - 1.34 = 0.02vcore only lor. whats so garang bout it? normally we increase 0.05v to add stability..

and dont be sarcastic. thx

wowee! so what board r u planning to buy?

aiyo PMR just in 2 weeks time still got time to play ar.. enuff said, i'll pm u my address so u can let me test it for u!

guys, asus p5b deluxe is better than p5w dh lar.. even many p5w DH user at XS are selling their board and getting p5b deluxe..=p

@ btw darkskythe, dont take it seriously ok

430x8 @ 1.36vcore....




Attached thumbnail(s)

yeah of coz i raised them.. wait. i'm going to set 3.5ghz and i'll copy the setting for u guys..

i've good news and bad news..


bad news, my processor need 1.4vcore to just complete super PI 1m and since i aim to reach highest stable clockspeed for below 1.4v, then i have to forget 3.5ghz for daily use

good news is, here are my settings.. they might be different a lil bit since i'm using different board..

435x8 @ 1.375vcore dual pi 32m passed!

This post has been edited by irenic: Sep 18 2006, 10:12 PM


Attached thumbnail(s)

well maybe i will try later see how far this chip can go... for now i only interested with highest clockspeed @ below 1.4v

hey guys, dont forget my corsair value select last time hit 1080@2.2vdimm stable dual prime!!!

wow this is insane! 1.575vcore..

u need to disable other things as well such as c1e, bla2.. forgot already haha but if i not mistaken u need to disable 2 things to ensure the EIST is completely disable

it's nothing serious, u need 1.6v @ 3.3ghz to get stable prime but others just run super PI.
all my conroe can easily ran dual pi 32m but then failed prime after 2 mins..

neway what cooling r u using? mind using coretemp to check ur real temp? speedfan is quite confusing..

This post has been edited by irenic: Sep 20 2006, 10:20 PM

actually, the L2 quantity doest not effect the oc at all... yes e6300 and e6400 are most ocable coz they have lower speed, and have higher oc percentage when they hit 3.3ghz compared with e6600 which has higher default clockspeed..

but at the end, highest clockspeed e6300 & e6400 still cant beat highest clockspeed achieved by e6600 or higher c2d..

conroe has higher chance to hit 4ghz compared to allendale..

but the reason i revert to e6400 is because i cant find a noticeable performance when using e6600 in real life.. the clear thing is e6600 is hotter than e6400.

@tAmpOi, maybe u're lucky, or maybe ur previous E6300 IHS is very poor?

bcoz from my experienced, all the 3 conroes are hotter than my 4 allendales.. 2 of the conroes are 10c higher than allendales @ same vcore while my last conroe is the best coz hotter 4c only

and i believe cpu l2 cache does effect the temp a lil bit

conroe (4mb) needs lot of voltage once it go beyond 3.2ghz.

i owned 4 conroe last time and all of them managed to hit higher fsb than my allendales but they needed lots of voltage and the temp was so hot for aircooling..

with allendale, i dun have prob with temp even at highvcore...

dump that asus and get biostar instead haha

i wanna jump to am2 lah like this.. the heat from the c2d makes my small hostel room hotter ..