it is Ready Stock now!

bro..pm details.

item arrived! thanks! will review once i got my modem E5776s-32

All telco using what band now for their lte?800 or 1800 or 2600?or its still depend on area? And if you could teach us,on how to identify the band used on our area,i think this could boost your sale. since it only support 2600 band, not very useful if its using 1800.right?

all 4g telcos (maxis, celcom, digi, u-mobile, redtone, puncak semangat ALTEL, P1, YTL, Asiaspace) was given licensed 2600mhz to roll out LTE. 2600Mhz the meant LTE faster speed band. This year only seeing maxis and celcom in large scale deployment, others are catching up, progress slowly.

only maxis and celcom these 2 telcos were given an extra supplementary band 1800MHz. 1800MHz is a secondary band to help complement the 2600MHz coverage matter, not meant to be mainstream LTE band, and this band intended for low capacity usage by handset. Why only this 2 companies got? better ask the authority.

you can read this paper news about MCMC statement on LTE band matter: http://uploaded.net/file/lilzq8bv

only TM go authorised to run 800mhz LTE at rural area. this even lower speed than 1800MHz.

higher frequency = higher capacity = faster speed. 2600MHz is much faster than 1800MHz.
higher frequency problem = short coverage, poorer indoor signal penetration capability, therefore 2600MHz indoor signal much weaken than 1800MHz.

ppl paying money for LTE service is expecting to ride on faster band for faster speed, not hope to be compromised unless absolutely no other way.

Poor indoor signal means 2600MHz in need of external antenna to boost its signal, then only can enjoy the faster LTE band 2600MHz.

1800MHz already good indoor signal, thus there is no much need of external antenna for 1800MHz as one can get pretty good indoor signal of 1800MHz for running lower speed LTE. same as mobile phone call service run at 1800MHz, very rare ppl can't make call/receive call indoor today. if mobile phone call works well indoor, same to LTE 1800MHz. the need is not there.

hope this clarify your question.

This post has been edited by coolstore: Oct 17 2014, 11:43 AM

Sorry, but that is not the answer im seeking for. My question is, i dont know what band my lte signal is using,1800 or 2600. Yes, i also know about the "signal penetration level", but to make sure, how do i know wether its 1800 or 2600? Is there any software to tell me which band is used? In my case,i can get lte signal even inside my house which is concrete wall. If its 1800, then using 2600 antenna is not going to make any difference. I hope u can answer me this before i invest in buying. Thanks.

mdma software + laptop + usb 4g lte modem + at outside your house.

in mdma software, u can select 2600 or 1800 or other frequency, one step to find out all.

* by rule, 2600mhz must co-exist with 1800mhz in 4G LTE deployment, means u should detect both no matter how weak/ unstable signal appearance. It is not like 3G era whereby the C telco only build 900MHz 3g station at some area by own decretion that makes totally no 2100mhz 3g access which drastically compromised 3g service quality, this matter has been condemned by MCMC. In new 4G era, the authority rules that every 2 1800mhz LTE station deployed must have 1 new 2600mhz LTE station build.

This post has been edited by coolstore: Oct 17 2014, 12:23 PM

Found this,
-for samsung user, issued *#0011# and on the first line, it will show which band is used

-refer here for frequency of band used
http://niviuk.free.fr/lte_band.php

Unfortunately,my area is still using lte band 3,which is 1800. Do you have yagi for this band?

u are going to find out 'what bands' are there, not just check 'now connected to which band'.

by using this 'connected info', u can't find other band. phone will auto connect to better indoor signal band.

if using smart phone, u got to find an app like mdma in windows to let u explore what bands are there.

the best way to do site survey still mdma software + usb modem + pc.

btw, if only using phone to go online, not by usb modem/mifi/cpe, this external antenna is not direct applicable to phone, but to 4g repeater solution instead.

Yeah, u r right about cannot find other band except the connected band. I agree with that. Using hp is just for testing purpose. My modem is on a router. But since my modem is not supported by mdma ,even 1.0.11 beta, theres no other choice than using hp.

maybe can try those 3rd party firmware for certain compatible router whereby user got a alternative window gui program which can direct communicate with the modem in the router to set which band or which mode.

Updates 19/10/2014:

New stock arrived! Now ready stock available!

Already despatch out 95% of pre-order fully paid orders.

Interested buyer can sms/whatsapp me zero one six-9963861 for quick deal.






This post has been edited by coolstore: Oct 19 2014, 11:12 AM

pm harga bos. repeater ada jual skali tak?

Dah pm.

4g repeater 2600MHz sangat mahal skrg, x carry ready stok. klu nak tempah, blh order utk anda.

dlm market lain biasanya repeater 2100MHz utk 3g saja, bukan utk 4g LTE 2600MHz. 3g repeater dah jadi murah.

sama saja mcm harga 3g vs 4g modem. barang 4g mahal.

Please quote price for repeater 4G 1800 , 2600

4g repeater is booster ?

erm... what i think repeater not necessarily mean booster.

booster normally is an additional gadget that plug into an existing wireless gadget to amplify the existing wireless power into a upper level. such as wifi booster that actually add more 10 to 15dbm to an existing wifi gadget with at least 15-20dbm tx power capability to make it total 30dbm or other level wireless output.

3g / 4g repeater is a standalone product. not plug into any other 3g/4g modem/mifi/cpe etc. the complete setup scenario is:
external 3g /4g antenna >> 3g/4g repeater >> indoor 3g/4g antenna (one or more units).

like the picture illustration below:



the repeater will help relays in outdoor signal into indoor building through external > internal antenna combinations to make indoor signal as good as at outdoor.

repeater solution often applied in shopping complex or commercial building. when u walk around in shopping complex try look at the floor ceiling for a mushroom type white color stuff, they are indoor omni antennas (a lot ) to disperse out phone call / 3g signals, therefore ppl can get quality call or connect 3g inside building with good signal. With good signal reception, also means the phone no need to works full load at highest radiation level to get signal, good for ppl health.

repeater solution can solve all wireless gadgets (phone/ tablet/ pc modem/ mifi / cpe) signal problems as smart phone or tablet can't plug in external antenna for them and it is not practical as well. the drawback is high cost of repeater machine itself. repeater product quality varied, it can range from low quality stuff with low price up to thousands ringgit also got. again, low price = not that good product quality or not durable (performance dropping...)

ok let me check again first.

as at beginning of this year i checked and surprised with the premium price tag, sure no one (retail side) will interested for this price level, so no bother.

hopefully next year price drops and seeing our other telcos like digi, umobile, p1 etc all got good LTE coverage, ppl may start to think it is worthy to invest in one for their smart phone / tablet and all other modem/mifi/cpe etc.

please find good unit bro...

my place only support 1800 family house 1800/2600