ur car fly off from the track? at LC or bukit?

full FRP brake usually works well on most semi-speed tracks
but if you need more grip, add those rubber strips (comes as a kit with 1 piece of FRP reinforcing plate in #15441)
the problem with the stock braking system is that it serves more just as a skid assist (so that the rear bumper doesn't touch the ground when the nose is up) rather than actual brake.

to make brakes actually brake usually you will need a gap distance around 1~3mm from the track surface and the brake
This is how I did mine. With the MS rear plate, there's a choice to alternate between the two holes to get different results.

bro, your bearing kasi kilat sikit la


   

bro, your bearing kasi kilat sikit la

mak ai !! I can see 3 layer brake bro!!    or smtg wrong with my eyes

Kilat-kilat nak pegi mana? Bukan ada awek tengok pun! 
HG Carbon + FRP + FRP 

bro...jom lepak this weekend...aku plan nk buat hanging damper japan style yg attach ngan cowl skali   

tonite, nk gerak SH borong brg sikit tuk wat projek ni...semlm godek2 kt utube n found this 1 japan dude showing his customize car wit that type of hanging damper 

tomowo going to hardware store.....DREMEL 3000, here I come

ji3moon once I have my powertool, ur sotong tires projek hopefully can start after SH event    tunggu yer

Kilat-kilat nak pegi mana? Bukan ada awek tengok pun! 
HG Carbon + FRP + FRP 

noted, oh lupa gaji hang dah masuk.selamat miskin di tengah bulan  


eh bro, thunder shot pink masih ada ar?hg 3mm

bro...jom lepak this weekend...aku plan nk buat hanging damper japan style yg attach ngan cowl skali   

tonite, nk gerak SH borong brg sikit tuk wat projek ni...semlm godek2 kt utube n found this 1 japan dude showing his customize car wit that type of hanging damper 

tomowo going to hardware store.....DREMEL 3000, here I come

ji3moon once I have my powertool, ur sotong tires projek hopefully can start after SH event    tunggu yer

Insyallah tahan sampai ujun bulan 5...bln ni dpt duit lbh dr langit   

ko tk bz kn? cer try tgk kete jepun nye hanging setup tu....aku nmpk ada 1 jenis getah bulat yg ntah mana diaorg dpt 

nk attach gambo tk jumpa lak

Get ready bro Semi Speed Track with Giant Niagara will arrive this monday  

is it better to put big diameter rollers (17mm-19mm) on the rear than smaller ones?

i always thought smaller ones are better on cornering

saw many people actually prefer big ones

yang getah itam cmni ke bro?

noted, oh lupa gaji hang dah masuk.selamat miskin di tengah bulan  


eh bro, thunder shot pink masih ada ar?hg 3mm

This item.

http://www.tamiyausa.com/items/mini-series...der-guard-15405

Tamiya 15405 Front Under Guard set

Can this be front braking system as similar performance on our DIY FRP reinforcing plate set Brake set.

Thanks

Just nice!!!!!!   

bro....go check out the japan hanging damper style......I'm looking to mod the same setup

if ikas don't mind, can lepak there spending time doing it 

I've tried HG 19mm seems stable in semi speed. When I tried 13mm great for speed.

Wah! New home ady.

Races this weekend who join?

Me maybe joining the Citta Mall by Taipoh one.

my ar is already slow with its plastic 13mm rollers at the rear
in fact both front and rear roller is 13mm ones (front is 13mm aluminium bearing)

couldnt beat the speed of the super2 on cornering but wins on jumping at the moment
been thinking to increase speed on cornering and straights without sacrificing the jumps and landing

one racer with ms + power dash equipped with hanging damper was fast on both, jumps high in mid air but doesn't swerve at all to a perfect landing 

for fast cornering, need to make the car 'shorter'
shorter here refers to the distance between the front and rear roller

you could also try 9mm bearing rollers at the back, or go with AO 830 bearing if you have more budget

but ms + power dash becomes front wheel drive already