my new rig  ..plz add me..

amd x2 3800 (am2)
biostar tf550
mushkin ddr2-800, 1gb x 2
gigabyte 7300gt 256mb
acbel 450 watt
creative audigy 2

p/s: can the psu support my current hardware? i did ask in the technical section coz my cpu hangs even after changing to new proc, mobo and ram..one of the answers said that my hardwares overload my psu..for your info, my cpu randomly hangs, but only the window background, except the mouse pointer..i need to restart by reset button..any idea why? i've reformatted the drive several times already..

want to ask...i've change my cpu from 3200 tu x2 3800+.before this it's OK.but after a fresh install windows XP.i found a hardware name "coprocessor" in device manage.Already install the chipset driver.tried clean with driver cleaner and reinstall.but it wouldn't help

what i supposed to do?

aw..somebody..plz help me..really in dilemma now..

which motherboard is good to be chosen for value ram DDR2 667/800 between
- Biostar TForce 550
- Biostar TForce 570
- Asus M2N-E (vdimm problem still hasnt solved rite?)
- Abit KN9

and i planning to use CM Hyper TX for AMD...can it really fit on the lists above without any problem?plus is there any possibility that the TX will colide with my side panel?
btw im using lian li pc-g7..

edit OT - soulfly do u using this ram --> http://www.teamgroup.com.tw/index.php?opti...=264&Itemid=467
and how much is it?

err..i dun really need a SLi mobo..just a single graphic will be enuf..
all the motherboards listed above are retailed under RM400
and seriously i dun have a really high budget to buy a newest chipset mobo..
from what i had browsed thru this thread,tforce 550 should be good already..

but still,i need ur opinion becoz still confuse which mobo is really good for gaming..

@allenultra

Why No One Take 570 & 590?

Or 570 Is Not Worth To Take?

DFI Infinity nF-M2 is wayyyy of from my current budget..
plus i like the appearance of biostar more..

yes hyper tx is bigger,plus higher..

thats why im asking here if it can fit nicely without colide with my side panel

ye? already got biostar 590? how much u bougth it n where?
i'm hunting fatality right now... maybe can change my mind if the budget is right...

thanks for the headup...will grab this cooler soon...

Heh but its not bad can prime 32M at HTT1333 also.

Penapis: What vdimm your mobo support up to?

Heh but its not bad can prime 32M at HTT1333 also.

Penapis: What vdimm your mobo support up to?

and what about cpu voltage.. how much u set in bios?
thinking to get the same board as urs... or fatality..
which one better?

RM680 so not terasa?? U must be rich

im using it
but i dun check the temp frequently..
if i remembered last time when oc, my cpu temp was nearly 50c on bios..

did u use the pre-applied thermal paste or AS5?

must you touch vdimm? cos RAM speed still below 667 in my case.

i tried using that T-OC utility - my rig hang. donno why.

and with air-con on, my full load (running 2x FAH client) is around 62c - 64c. however this is subjected to my exhaust fan speed.

huhu..yesterday i oced to 2.5ghz then play heavy games..and then suddenly my pc shut down itself...like blackout..
i restart it, i went into bios, my god the cpu temp was reach higher than 60  

i might need a better cooling after this

don't forget that I'm on HyperTX

Shud be OK bro.. i'm oso use biostar mobo same as your but currently use 8pin PSU connector

if im not mistaken @kalakatu use Biostar 570U with 4pin PSU connector.. try ask him lorr..

Converter?? Haven't find it yet ler bro..

which biostar revision start using 8-pin? is it the same revision as the one with 2.4vdimm?