if TForce 6100

go to Bios

OC Navigator

Memory Clock Value or Limit, change it there..!!

For CPU/6 try go to the first page

For example,

CPU Default speed = 2000MHz
Ram Speed = 333.33 (DDR667)

So if u divide 2000 by 333.33, u will get 6 aite?
that means ur divider for ur RAM is CPU/6

If u oc your CPU 250x10=2500MHz
that means ur ram run at 2500/6 = 416.67MHz

Another Example

CPU Default Speed = 2000MHz
RAM Speed = 400 (DDR800)

2000/400 = 5
So, Ram divider now is CPU/5

If u oc ur CPU to 250x10 = 2500MHz
That means ur Ram run at 2500/5 = 500MHz

thanks camedamed.. got edi!!..

dlm ym xmoh bgtau

hehe u can always ask help from our
great SOULFLY 
thinks he can help u 

for RM270 it's great value imo. I actually asked for kurang and can have it for RM260 but that is older revision 1.1. The one now selling I think is revision 1.3. make sure you get that one. if the gigabyte s2 can OC with the new bios update like the previous poster said, then maybe that one better value especially if you want some features like gigabit lan...

however, it does not have a parallel port so if you need one, then get something else (it has a parallel header only for you to plug in port). also no gigabit lan only 10/100 and no firewire 1394. if you don't need all that, this is the greatest value with build in GF so far. the gf6100 score in 3Dmark01 is about 4800 - 5500++ depending on your system. on mine, it's about 5100+ and 5600+ when overclocked. okay for games like generals (medium setting, 1024 x 767very smooth).

also have the sempron 2800 running on it and can overclock to about 1900 stable only. didn't try any other combinations though, like increase or lower this and that. you have to try it yourself.

i don't have the tforce, i have the gforce but i also put together a sempron manila core 2800+. i oc'ed it to 1900 only (only a 300mhz increase) and didn't try anything else higher but that was the highest i could go without adjusting any things out of spec, maybe just a small vcore increase. but i feel that the manila is poor for o'clocking because at 236 x 8 it seemed it maxed out with stock vcore . it started having stability problems after that unless you bump up the vcore. i don't think it's my board as i can get my 2ghz 3200+ to 2.6++ with no problems at all (orleans core). 2.7 also possible with higher vcore but gets hotter (diminishing returns kicks in) so I just clock it at 2.6gig.

BTW what exactly did you do to burn the three ram slots?!! *shocked*

care to share more? why do you feel the older revision is better? (the poster was asking about Gforce not Tforce). BTW the older rev 1.1 has no heatsink on southbridge and gets very very hot reading from older reviews on newegg.com. even with heatsink it's quite warm so imagine without.