First born of my AM2

AMD3000+
DFI NF4 UI M2
2 x 1GB Kingston DDR2 533 [ Micron D9GCT ]
Galaxy 7300GT



Add me to the list !

This post has been edited by Algojo: Sep 18 2006, 07:04 AM

This is mine but not prime stable coz havent prime yet play cs while hosting a hlds no reboot.
Btw im new to a64 oc architecture and i got confuse with so many settings in DRAM configuration and divider and the HTT link multi.How to read the multi table in the first post.

Current setting :
[*] HTT multi = 2
[*] Ram divider = DDR667

thanx for reply so 411 x HTT multi = HTT Link ?
izzit i have to find my max cpu speed before i could bump up to 2.8Ghz?

After several burn-in process but still in progress.
Memory divider = DDR667/6 5-5-5-12-23



Heat is my enemy.Using stock heatsink and setup just lying naked on top of my NF2 UI

Load: 50 ~ 58
Idle : 37 ~ 38

I could get up to 2.8Ghz but i don't like high temp coz i always on load.So i really hope that burn-in process would give me lower temp and a few notch of clocks

1.6~1.65v shud be ok on stock heatsink but if u temp paranoid like me it's not ok.

izzit my cmos battery problem coz i encounter this problem when suddenly my system got into blue screen then i couldn't boot up.Even remove the jumper and cmos battery.Then now if i shutdown my system, i need to set all the bios back and it really a hassle