ma read my earlier post and decide lo

I think I should change it but need to choice between rubber and metal one

ehh titan got problem kar ? now all change again =.="

Wanna try other thing ma

it's to reduce/prevent heat expansion of the hose (stock rubber hoses expands quite easily) so that when you're cooking your brakes over 200-300 Celcius or more, the braking feel is still linear and won't feel spongy.
this is what most people won't deal with and to them the cable tie would most likely have zero effect

A secondary effect is to reduce/prevent the expansion rate of the rubber as it ages.
this is evident comparing Vyraz 's car and mine as his is on 90k km/3+ years iinm? and the hoses are about 10-20% thicker than mine and feels a bit spongy/soft while mine is stiffer.
this is what most people may be interested if they intend to keep the car and never sell it (at least 3-5 or more years of usage, considering the hose did got expanded slightly about 3+ years of time)

of course yeah, you CAN use steel braided brake hoses which are MUCH BETTER however the going price for inspira/lancers for such hose kits are between 500-1k+ iinm.
http://www.thousand.com.my/index.php?m=pro...D=101&proID=302 (RRP RM580)

the cable tie costed rm50/100 pieces via ace hardware (supposedly high temp high strength outdoor usage etc fancy american shit but made in china lel), we used 260+ for 4 wheels.

=edit=
to add in, yes i have steel braided for my iswara which are also from IMP and i really like the responsive braking feel.

although honestly i only replaced them because the iswara was 12-13 years (at that time) old, and the brake hoses were pretty fat and the outer rubber were already flaky/cracking which could be a potential safety issue especially i do cook the iswara brakes to over 350 Celsius (or more)

Is this call "extreme anjingneering" ?

Is this call "extreme anjingneering" ?

saw from there "Lancer 10 4WD"  

Install liao become EVO 

damn obvious lor


nearing

u go mind ur business with prof dr jay la ..
now china control japan market tau ?

Chevy ester is CHINA engine .. just that they ask mitsubishi build the engine way before they build the car !

He always cari gaduh lately

shaddup u! I got step on your elephant tail is it?!!

all sifus, what if 3yrs old inspira car juz drove 13k and do I need to service cvt - flush cvt oil or wait till 40k (default schedule) or do it on next 20k? please advice...

can go kepoh mah...

rcs clubman series suspension group buy... interested pls put ur name as we r goin to negotiate for a lower price... u can put ur name 1st n we will discuss the min. deposit required by rcs n the installation time frame... they just shifted to shah alam n may need more time to settle down... this saturday or next monday we will arrange to visit their shop n test drive some cars...

5 > rm3.2-3.4k
10 > rm3-3.2k

1. t630
2. nzh0920
3. mugi
4. botack
5. williamhoo
6. quazacolt
7. freakystein
8. nncl
9.
10.

 
I agree with you...I am not rich...kena conned by rich boy NZH