Look so good~~~~
I still love all your modern warfare works.
Wish to see more in future. Good Job~

A quick weekend build for a group build
https://khaigunplars.wordpress.com/2017/12/...oon-class-ssbn/

wooo, nice build.
tq for sharing.

found some nice diorama for typhoon.

Ok..end year project. just finish tracing the main decal & logo.

Forces of valor series from unimax

latest update: marking & decal printing seen work fined. hope this weekend can finish it up.


btw, panda model ztz99B, too lazy to print & cut the digital decal..so i get this decal (with die-cut) for rm28.
this is my CNY project.

accidently drop a cement on the clear sprue when i want to cement the canopy.

found a solution from utube about how to recover the acrylic transparent part.
Recovery 80-85 %.

sand the scratch texture with sand paper of 1500 with soap watter apply.
keep sanding it until it clear without changing the sand paper.
then, the surface become smooth & clear but no glossy.

apply mr color clear gloss.Done.
Noted..bfore this i spray the anchor can clear gloss..end up it damage the clear part & need to re-sand again.

this method only apply for surface scratch lah, if crack line, then cannot lo.

Still good no afraid.

done . 1/72 trumpeter Su30KN

Always good on modeling, love it~

Tq.
but now , already slow down to build my kit.
may start to build su34 mid of this year

Where do you get that digital decal pre-cut? Been looking for this as I too lazy to cut it from sticker.

u mean the ztz 99a?
it come with 2 type, one is 2015 ver & 2017 ver.
i bought is the 2015 ver is moch cheaper.

https://3gmodel.taobao.com/search.htm?q=%CA...=&encoding=utf8

TQ, I found it on ezbuy and order two set for my panda and hobbyboss ztz-99 kit. The price for two come out to about RM50/= including shipping.

Ezbuy, the price of shipping seen to be quite cheap.

finish assembly my panda model ztz99a. Quality not as good as Trumpeter. fitting issue happen in between the truck link & the gear, need to trim the gear abit to fit in the truck link in.

Truck link issue: 1 side of truck link need 82pcs, but the kit only have 85 pcs..mean u have extra 3 pcs only. so when u cement the truck link piece by piece u need to make sure in between the piece must have gap line (0.05mm). if u cement the piece without the gap..85pcs wont enough. i very lazy, i cement it without the gap line..then notice tak cukup..so when cement the second side link i need to put a gap line.

with 0.05mm gap line need 16pcs = 17pcs without gap line.
mean every 16 pcs link u save 1 pcs.
82/ 16 = 5.2pcs is totaly tak cukup.


btw, get my tamiya su34..this is very old kit from 1999..texture & fitting got problem...quite poor lah. not encourage to take this kit. the trumpeter new kit 1/72 su 34 is double up the price.. with the price can get kitty hawk 1/48 su 35 PLA ver....but i saw kitty hawk maybe release their 1/48 su 34 within this year...so if the price below rmb300, will take a shot.

after CNY may get a kitty hawk 1/48 su 35.

This post has been edited by limfreelance: Jan 18 2018, 08:44 AM

so far progress....Over weathering effect liao.
need to re touch up again.

Is that GiMix 1/100 scale Su-34?