so far , Prolink not release any firmware .


http://www.billion.com.au/support/bipac7402gl.php

for advance user only , suggest newbie don't flash this~.




This post has been edited by yangxi: Jul 16 2006, 12:09 AM

eh..only 4 of us in LY.forum using this modem ar?! anyways, the wireless connection from my room to my dad's pc at downthere is 'very good' when my room door remained open but not when the door is closed, as the speed status is 'low'......

wondering which brand is good for repeater or any other method?

I am still using Prolink 9000W. If it dies, i buy this model.

Prolink works pretty well with BT, well, at least for the current one i am using now.

to eric84cool:

QOS setting.




Attached thumbnail(s)

Hey Yangxi....based on your setting for Virtual Server....I'm wondering which IP address
should I set for it?? Referring to the asterik mark in the pic attached below....



the ipaddress for BT part is supposed to your computer IP address or the internet IP address?

MY com IP address is 192.168.1.101...iszit correct?! your house got how many pc connected to ur modem?

yap, same with your com ip address.

my home have 5pc + 2adsl + 2 wifi combo router.

In this modem configuration.....my downstream is showing 484000 and upstream is 384000....iszit common for 1Mbps user here??

your real speed is 484k(down) , 384k(up).

what is your streamyx package ? it seems that telekom cap wrong speed.

I'm 1Mbps user..paying 88 buck per month...actually last few days ago, I got checked with the speedometer.....it's about 1000 something in the meter....I guess the speed is quite ok for me...

it's just happen that since last 2 days ago, my BT download slow and then I suspect that my speed is not like the previous......I also wondering whether TM net did capped my speed if my download is too good?

1MB package
max download should be ~100k/s



This post has been edited by yangxi: Jul 22 2006, 10:25 AM

yeah...that's the speed I got last few days ago.....but then how come u can use ADSL 2+??might to teach me....can I use it as well??what's the difference between ADSL and ADSL 2+?

*I crossflash another modem Prolink 9300G -> Billion 7402G

refer here:
http://forum.lowyat.net/index.php?showtopic=301675&hl=adsl2

better line signal.

This post has been edited by yangxi: Jul 22 2006, 10:36 AM

AHHHHH!!!!~~~curiosity does kill ppl....I want to crossflash...but I don't dare too....but how come PROLINK can't support ADSL 2+ ...I mean when I change it to ADSL 2+ ...there is no incoming signal at all.....then forced to use ADSL instead of ADSL 2+....haihz

maybe your area DSLAM didn't upgrade to ADSL2.

but prolink sync adsl2 line much longer. suggest u change back to ADSL

note:
latest firmware version
. Annex A: Upgrade to E67.5.33

This post has been edited by yangxi: Jul 22 2006, 10:46 AM

Original firmwares for both Prolink 9300G & 9300GV v5.05. In case you wanna revert back to it's original Prolink firmware. If you compare the firmware with Billion firmware, you will notice it is exactly the same with exception of the id string & images.

http://rapidshare.de/files/26610394/Prolin..._v5.05.zip.html

This post has been edited by jio: Jul 22 2006, 07:10 PM

thx guyz~!!!!

anyways, yangxi...that day u gave me the link for improve the wireless signal..what's that link ar???

iszt this?
http://192.168.1.254/configuration/hidden_txpower.html

I tried it today...but can't found the site...how come?!why that day I can....I was curious...hohoo

This post has been edited by eric84cool: Jul 25 2006, 09:33 PM

latest firmware
. Added Tx power level configuration to web interface.





This post has been edited by yangxi: Jul 25 2006, 10:02 PM

THANKS

*do you have Prolink 9000P latest firmware ?

Isn't 9000P using the conexant chipset same with aztech 305eu? I remember there are firmwares from origo that is some what compatible with 305eu. Risky though.

THanks.
Firmware compatible with SAFECOM modem .