Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

Home Networking TP-Link 3G Routers Owner Club V3, MR3420

views
     
noobandroid
post Jan 11 2014, 08:23 AM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
upgraded to e372, all info obtainable now, includes QoS, still on tty/USB 2 so i dont need configure anythng, yay

btw e353 now i going to sell off
noobandroid
post Jan 13 2014, 10:18 PM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
QUOTE(budakhops @ Jan 12 2014, 04:30 PM)
Hi guys..
i just update my mr3420 tu Huntsman 2013-12-20red. but the router just show this on the modem page page. is it normal? internet is connected.

user posted image
*
go to information tab and you will have these (my example):
CODE
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 1/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.10
S: Manufacturer=Linux 3.10.24 ehci_hcd
S: Product=EHCI Host Controller
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 0.00
S: Manufacturer=Huawei Technologies
S: Product=HUAWEI Mobile
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=qmi_wwan
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=qmi_wwan
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

in this list, possible port will be
CODE
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=qmi_wwan
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=qmi_wwan
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

So seek around the I:* IF#= that has Driver = qmi-wwan to seek faster, because drivers are loaded on that interface while others do not have it loaded are ignored

this might get to the first post tongue.gif my first contribution

This post has been edited by noobandroid: Jan 13 2014, 10:20 PM
noobandroid
post Jan 15 2014, 10:31 AM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
QUOTE(budakhops @ Jan 15 2014, 01:00 AM)
is it possible to configure mr3420 router to use vpn?
*
as i remember, it is possible
noobandroid
post Jan 19 2014, 09:39 AM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
QUOTE(budakhops @ Jan 18 2014, 05:59 PM)
I did google for this but only found howto to set up vpn server on openwrt..
I was thinking of making the router connects to a vpn server like bolehvpn or epahngi n share the connection to multiple pc in lan. Is it possible?
*
i think is using PPTP, not on openvpn configurations
noobandroid
post Jan 19 2014, 10:57 PM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
QUOTE(ming86 @ Jan 19 2014, 10:34 PM)
Anyone using Huntsman 2013-12-20red with Huawei E398?
Did the SMS feature worked?

Mine shows blank after update to Huntsman 2013-12-20red. TL-MR3020.

user posted image
*
it doesnt work
noobandroid
post Jan 31 2014, 11:06 PM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
QUOTE(yonghong @ Jan 31 2014, 08:53 PM)
» Click to show Spoiler - click again to hide... «

hi sifu.wan to ask somthing here, i m currently using huntsman 2013-11-10 red version e3276 with mr 3420 v2. all were set according to first page instructions, can connect n surf internet, bt the speed very slow (0.3mbps only n very unstable).then, i was testing the same sim card with s3 handphone, can get speed to 3-4mbps. wat is the problem ya? same area,same location tested. notworthy.gif  notworthy.gif
*
reposition your tower maybe? different hardware receives different tower reception according to where you point the modem to
noobandroid
post Feb 14 2014, 08:16 AM

Audiophile
********
All Stars
11,836 posts

Joined: Mar 2011
From: Kota Kinabalu, Sabah
attitude adjustment version still standing strong on my mr3420 v1, my router seems not liking hunstman firmware and always go crazy, but favorites AA
« Next Oldest · Networks and Broadband · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0348sec    1.19    7 queries    GZIP Disabled
Time is now: 17th December 2025 - 05:09 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.