i don have active cooling on the ram le... so i just let it run 1:1 lor... hehe 

I see. I using 2.2 vdimm... scare scare bit due to 24/7 
yea...Crucial 10th jz start @ 1100
Even w heatspreader also very hot ar...i touch it, feel like my hand got burned   

-pWs-

Wrong.
10th annivessary default voltage is still 1.8Volts.

The 2.2Volts that you see in Crucial's website is the maximum voltage that Crucial warranties their ram.
They never said anything about you have to put 2.2Volts on their ram.

My new ram : Team Elite DDR2 667mhz CL4@DDR2 1000mhz still CL4

Hehe, I don't really understand their process of "handpicking" either. I assume that they select good batches of chipset to put into the Crucial 10th anni.....

Yeah, even though they are DDR2-667 rams, they perform much better than equivalent RAMs or even those with DDR2-800 rams.

For example, my 10th anni perform almost as good as my crucial ballistix DDR2-800 rams. For a DDR2-667, that's considered good.... 

However, I have seen some 10th anni going higher than that but needs more voltages..... again, overclocking not only depend on batches, it also depends on luck and the hardwares, bios and other factors....

I have the 10th anni and the crucial ballistix. From these 2 rams, the ballistix was slightly better in overclocking but not by much. However, remember than the 10th anni is DDR2-667 and the ballistix (that I have) is DDR2-800. This is based on my ram modules only though.....

The tracer is bling bling rams and runs much hotter than the anni and ballistix due to the LED setup. So, I guess in terms of OC, you need more active cooling for it.....

All of them are supposed to be D9GMH although some forumer previously posted (I think it was posted by an 11-year-old pretending-to-retire female overclocker  ) about some crucial rams not entirely being D9GMH....... I think crucial never claimed that they have D9GMH in all their rams either.....

No, but you can always buy from karom or newegg.
Good price though.

SRP is around RM659 - RM699

starting to love my RAM now

noob here wan to ask any sifu here, im now using Twinmos 2x512 ddr667 ram, and i set its timing to 4-4-4-12 at ddr800, will it shorten its lifespan considering long term use?

if with stock vdimm @1.8v?

But factory giving a life time warranty.Shldnt it be a vulnarable from voltage?Hmm i meant even in back condition it shldnt be easyily spoilt rite.

Usually they prefer in pairs. Nvm, I'll just hang on to my setup now. only when the cash comes in then only can upgrade. 

a bit curious here..
ive tried 5-4-4-5-11-2t and 5-5-5-5-11-2t setting at the same speed,only differ in timing..and my super pi result is.

at 5-4-4-5-11-2t,i gain 25.187scnds,while at 5-5-5-5-11-2t,i gain 24.938 scnds...

tghter timing shud be better rite?

any OC for kingston/corsair/apacer/Adata/transcend value RAM? that team value RAM is hard to find, and yours is the D9 chipset is it? lagi hard to find, like extinct liao one. shops used to sell this RAM but the price == 800MHz. got a noob question, a 800Mhz RAM can OC better than a 667Mhz RAM? since 800Mhz can do 5-5-5 timing on 800Mhz @ 1.8V.

no one will run prime for that kinda frequency, as to be stable @ that speed & timing, insane voltage is needed.