Need some understanding, what happen to the device behind the router when turn on IPv6 for Unifi?
Will all be IPv6 or it is still IPv4?
Being using Mikrotik.
Unifi TMnet Streamyx/Unifi & IPv6, Now live!
|
|
 Oct 22 2013, 04:52 PM
Return to original view | Post
#1
|
 
Junior Member
379 posts Joined: Jan 2003 
|
|
Quote|
|
|
|
|
Oct 22 2013, 05:46 PM
Return to original view | Post
#2
|
|
Junior Member
379 posts Joined: Jan 2003
|
In this case, all the device behind router will get IPv6 and IPv4 IP address.
For the IPv6 case, the IPv6 DHCP is from the router? or TM DHCP? |
|
|
Oct 23 2013, 07:32 AM
Return to original view | Post
#3
|
|
Junior Member
379 posts Joined: Jan 2003
|
Trying to follow this guide to enable IPv6 on my setup. However when I run a test on the test-ipv6.com, it still doesn't show the IPv6 address.
However, on the Miktrotik Winbox, I can see the IPv6 address and also my client machine, I'm able to see the IPv6 address. Any advise on where to start troubleshoot? |
|
|
Oct 24 2013, 12:44 AM
Return to original view | Post
#4
|
|
Junior Member
379 posts Joined: Jan 2003
|
QUOTE(asellus @ Oct 23 2013, 09:45 AM) Recycle your Ethernet/wireless connection first, then try again. Tested of reboot the system, but nothing happen. Weird things is that I'm able to see the DHCPv6 client IP address, only doesn't go out to the test-ipv6.com. Can even see on my client machine. |
|
|
Oct 24 2013, 11:11 PM
Return to original view | Post
#5
|
|
Junior Member
379 posts Joined: Jan 2003
|
QUOTE(asellus @ Oct 24 2013, 07:22 AM) Can you make a screenshot of the bolded thing? With routerOS 6.5, DHCPv6 isn't supported yet. Thanks, @asellus for pointing out & @rizvanrp for the step by step guide. Update to routerOS 6.5 and re-configure seems solving my issue.Finally, managed to visit test-ipv6.com and get 10/10 results. I was referring to the IPV6 address I get in my Windows clients. Not quite understand DHCPv6 difference that IPv6 address in this case. This post has been edited by maxiscool: Oct 24 2013, 11:15 PM |
|
|
Oct 24 2013, 11:13 PM
Return to original view | IPv6 | Post
#6
|
|
Junior Member
379 posts Joined: Jan 2003
|
QUOTE(maxiscool @ Oct 24 2013, 11:11 PM) Thanks, @asellus for pointing out. Update to routerOS 6.5 and re-configure seems solving my issue. Update:- Manage to get IPV6 if using Chrome. Safari doesnt seems to interpret correctly.Finally, managed to visit test-ipv6.com and get 10/10 results. I was referring to the IPV6 address I get in my Windows clients. Not quite understand DHCPv6 difference that IPv6 address in this case. How come my post do not have IPV6 indicator as other forumer despite success in test-ipv6.com This post has been edited by maxiscool: Oct 24 2013, 11:13 PM |
|
|
|
|
|
Oct 25 2013, 09:12 PM
Return to original view | IPv6 | Post
#7
|
|
Junior Member
379 posts Joined: Jan 2003
|
I'm doing further test on the setup of IPv6 despite having 10/10 result on test-ipv6.com.
I disable the IPv4 interface and left the IPv6 turn on only. (reboot router and windows interface just in case), and i get an IPv6 address. And when I try to ping www.google.com, it request time out, is this the expected results? |
|
|
Oct 25 2013, 10:40 PM
Return to original view | Post
#8
|
|
Junior Member
379 posts Joined: Jan 2003
|
QUOTE(darrenliew96 @ Oct 25 2013, 09:28 PM) Maxiscool: No. This is not the expected result. It should be able to get reply from google.com with IPv6 address. Hi Darrenliew96, I'm using a PC. Apparently I've figured out the root cause, it is the DNS not assigned to my device, manually insert in the DNS field on the PC, it works surfing to www.google.com and forum.lowyat.net.What device are you using? PC or Phone? How to find out your IPv6 really work? Solution: disable or just make your IPv4 address change to static while simply randomize and input gateway IP. Leave IPv6 settings auto assign by DHCPv6. Then try to ping and surf www.google.com If can surf, that means your IPv6 is ready to be used. Now, I need to figure how I correct this config, any help? |
|
|
Oct 25 2013, 10:57 PM
Return to original view | Post
#9
|
|
Junior Member
379 posts Joined: Jan 2003
|
Thanks, this will work if I manually entered in each client/PC.
But I'm trying to check how come it is not push to each client as the correct DNS without manual input. |
|
|
Oct 25 2013, 11:13 PM
Return to original view | Post
#10
|
|
Junior Member
379 posts Joined: Jan 2003
|
Not quite understand that, but I'm trying in PC and MAC. What you mean is that Windows need manual input? My MAC also need manual input. Is that anything i need to look at ?
|
|
|
Oct 25 2013, 11:46 PM
Return to original view | Post
#11
|
|
Junior Member
379 posts Joined: Jan 2003
|
Maverick..
|
|
|
Oct 26 2013, 12:00 AM
Return to original view | IPv6 | Post
#12
|
|
Junior Member
379 posts Joined: Jan 2003
|
Thanks once again, change the settings at ND. Now MAC able to pull DNS automatically.
Can give a brief on which MAC onwards this will work? Ubuntu linux will works? For Windows, no solution? To use IPv6 with routerOS, i need to manually input v6 DNS? |
|
|
Oct 26 2013, 12:22 AM
Return to original view | IPv6 | Post
#13
|
|
Junior Member
379 posts Joined: Jan 2003
|
Thanks @asellus for the explanation. OK, will try with Linux once perform the installation.
For windows, is that limited to RouterOS and Windows or other router will be perform good? Even latest Windows 8.1 will not be resolving this issue? |
|
|
Nov 6 2013, 08:27 PM
Return to original view | IPv6 | Post
#14
|
|
Junior Member
379 posts Joined: Jan 2003
|
QUOTE(Sharingan @ Nov 5 2013, 11:28 PM) @asellus Hi @Sharingan ,Did u run successfully run Mikrotik with TM DHCP-PD ? Kinda wondering how's ur config looks like since i'm trying hard to follow the code and till now still return NULL . Well to be exact, i did get the address but i can't ping to ipv6.google.com nor www.kame.net . My current setup: Virtualbox 4.1.24 2 x Physical NIC Mikrotik 5.25 ADSL 4M Streamyx Few hours ago i did tried on pfSense 2.1-RELEASE , same condition met . Can't ping to both address at all and this time i'm quite sure that all my firewall rules are set for accept and forwarded properly. If else fails, i'll go back to tunnelbroker setup. Thanks for the attention and insights. I'm facing the same issue whereby I'm not able to ping the domain name. However when tried with web browser, I'm able to surf the IPV6 domain. Are you able to get thru this? Thanks. |
|
|
Nov 12 2013, 07:35 AM
Return to original view | IPv6 | Post
#15
|
|
Junior Member
379 posts Joined: Jan 2003
|
QUOTE(Sharingan @ Nov 6 2013, 08:36 PM) @maxiscool @SharinganHey there buddy, well i haven't figure it out yet since i'm quite confused as to @asellus config. In the statement that asellus pasted, i noticed that there's a bridge interface . Not sure on how to achieve this or what interface to bind/group with into the bridge. Will dig deeper later on since i'm quite handful with other task atm. I'm sure prasys or wkKay wouldn't mind shedding some light on this situation. @asellus , Sorry for the late reply, i'm still figuring it out your full config atm and as i mentioned in this post, atm i'm kinda got my hands full with other tasks to complete. But if you wouldn't mind to shed some light on your full config please , it would really help us Mikrotik users here. Thanks . I just discovered that I've being ping the wrong way all this while to ping ipv6, apparently when I tried "ping6 ipv6.google.com" the return is positive. You may want to try this.. @asellus, Am I doing it correctly? If yes, perhaps this will help others. |
| Change to: |  0.0376sec
 0.33
 7 queries
 GZIP Disabled
Time is now: 27th November 2025 - 09:50 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.