QUOTE(hart932 @ Jan 29 2014, 07:40 AM)
Just received my miracast dongle ystd evening. Eagerly plug it on to test. TV shows dongle working & trying to connect with tablet. After a while showed failed connection. Then I disconnect my wifi from router and it got connected! It then install the drivers for the dongle. Once done installing, the extended screen came up on the TV. I can then reconnect the wifi to surf.
Playing around the intel settings, I couldn't get it to duplicate the screen, only in extended mode like most have reported in other forums.
My experience of miracast so far:
1. have to add device & install everytime you use miracast. Win 8.1 doesn't have the dongle listed permanently like installed printers / other devices.
2. have to manually disconnect wifi router to allow dongle assign ip address with tablet before manually reconnecting with router after setup (not sure if this is same as other miracast device).
3. I get occasionally streaks of corrupt data on TV like astro when it rains. I suppose with static powerpoint presentation is less of a problem but watching video can be annoying. Good thing is that dongle remains connected & didnt drop off throughout 49mins youtube playback testing.
4. Haven't solve the extended mode problem. Using a mouse on primary screen is ok but mouse control & function in extended screen is kinda erratic. It depends on transmitted video signal & delay. So while you move the mouse, what you see on extended screen is different making control difficult. Mirror/ duplicate screen is priority in order for it to work as you can navigate on primary screen & let the TV transmission do the catch up.
I not sure the brand of miracast dongle you usingPlaying around the intel settings, I couldn't get it to duplicate the screen, only in extended mode like most have reported in other forums.
My experience of miracast so far:
1. have to add device & install everytime you use miracast. Win 8.1 doesn't have the dongle listed permanently like installed printers / other devices.
2. have to manually disconnect wifi router to allow dongle assign ip address with tablet before manually reconnecting with router after setup (not sure if this is same as other miracast device).
3. I get occasionally streaks of corrupt data on TV like astro when it rains. I suppose with static powerpoint presentation is less of a problem but watching video can be annoying. Good thing is that dongle remains connected & didnt drop off throughout 49mins youtube playback testing.
4. Haven't solve the extended mode problem. Using a mouse on primary screen is ok but mouse control & function in extended screen is kinda erratic. It depends on transmitted video signal & delay. So while you move the mouse, what you see on extended screen is different making control difficult. Mirror/ duplicate screen is priority in order for it to work as you can navigate on primary screen & let the TV transmission do the catch up.
1. Win8.1 does has permanently listed dongle, swipe out from right screen, choose projector, the dongle will list there.
2. No need disconnect router.
3. I did facing drop off problem, sometime
4. Got mirror and extended mode to choose. No need install driver
You using the bundled miracast software for dongle?
You have to connect using win8.1 internal detection, not using the 3rd party software then your problems will solve
Jan 29 2014, 09:01 AM

Quote
0.0260sec
0.54
7 queries
GZIP Disabled