Can buy from ebay cheap cheap. For Saga, the OBD2 port should be below the steering area IINM.

Just a hole port for you to plug in. 

it is installed at the vacuum hose, letting some air to leak into the engine bypassing the air sensor.

1. more pickup
2. smoothen the drag when de accelerate.

4 year old Saga BLM.
Breaking any record here?

[attachmentid=3622126]

What FC?

Sometimes if travel distance long enough, 16km/litre quite doable



FLX can do





BLM also can do





Train your foot to drive more often between 10~15in/hg, u got the holy grail liao. Especially BLM/FL does not have a pre-mapped fuel regulator, better control of gas pedal will make tremendous difference compare to FLX.

what mr david said about flx cvt is true coz start from 2k rpm onwards, the strategy of the cvt has change where by the character will be more resposive, thats why even u r rev a bit beyond 2k rpm, u will hear it roar n suddenly u feel its alive :-).

Thats why, 3 strategies implimented for punch cvt, 1.6k rpm n below, torque retention, to ease driving at parking lot, to park, n driving slowly around neighbourgoud coz u dont want sudden acceleration, or slingshot or rubberband effect especially during parking.

Next after 1.6k n bfore 2k rpm, the cvt ratio is labour for fuel efficiency, thats why feel a bit lembab :-), 2k rpm n above, change character, from lembab, suddenly roar, it seems that it reach its powerband. Reason, for cruising n overtaking.

Just look at speed when drivng below 1.6k rpm, when driving between 1.7k to 1.9k rpm, and when 2k rpm, u will understand what i said earlier. If understand it, then u will know when to rev below 1.6krpm, when to rev between 1.7k rpm to below 1.9k rpm, and when to rev up from 2k rpm n onward..

Hope this help for cvt flx, whether se or 1.3. Actually its nearly Same as mitsu cvt also in mirage, below 2k rpm is the best, but not too low coz it will reduce torque to assist parking procedure. But of course, cannot beat mirage or even attrage due to 3 cylinders, aluminium n light weight body.

try DIY service your stock pollen cabin filter.

go see 1st page liao. 
adriangan you too much watch prawn deswai. 

Normal OBD2 scanners WONT work for the 16-bit Campro ECU la

The OBD2 scanner works for the Persona Elegance, but NOT for the Saga.

Link mana pandan

dont worry, obd2 compatible with saga flx. i am using it on daily basis

Takkan cucuk at buntut meh?

guys, can recommend me any good place to buy a car? i'm living in shah alam. i had already made up my mind thinking of getting the FLX SE as it is within my budget.

Buy Myvi SE better la

seriously? i mean i already driven the 2nd gen Myvi SE and i dont really like the feel of driving it.

durian smell affect the wiring? 



where you can say that? I love my durian. ...

You know how many durian I can buy and put in my trunk? 

those are very expensive rubbers ....

up to you and your wallet. ..

I am on Falken Ze 912. good and affordable.

If I had the time,  Segamat and Muar the best places to get durian! 

Anyone can recommend me any good body shop around KL to fix bumper damage is like taking a hammer and smacking it right onto the bumper =(