Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Help with my GSKILL F1-4000USU2-2GBHZ, Cant OC well... sigh...

views
     
remysix
post Jun 2 2006, 10:27 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Jun 2 2006, 03:27 PM)
well, dunno what wrong. even at 1.4v, my opty kinda hot & can reach 58c full load. mebe times to change the XP-90  sweat.gif  sweat.gif
well, i can run DDR500@ 300HTT, but my opty temp very high. wait after i change my cooler, u will c it running at 300HTT@ DDR500  wink.gif  cool.gif
*
gengstapo, u r talking about both ocing proc and ram...no wonder even irenic got headache...swgiant is looking for help to get the max oc for his ram la bro - same as i am...but ur talking about getting the best out of ur proc and mem --> 300HTT@DDR500... doh.gif kasi fenin orang la...
anyway...what is the best u can get from ur mem?and btw, whatabout the bios version...any good suggestion on which bios to use...for dfi nf4 lp...
remysix
post Jun 2 2006, 10:29 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(swgiant @ Jun 2 2006, 01:33 PM)
anyway, how to force my mobo to run 1T? sometimes i saw it runs 1T but soemtimes 2T... any idea?
*
did u set the Command Rate to Auto???btw, what mobo do u have???

This post has been edited by remysix: Jun 2 2006, 10:30 PM
remysix
post Jun 2 2006, 10:37 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Jun 2 2006, 10:34 PM)
laugh.gif  laugh.gif .. not to kasi penin org lerr. just to inform my situation as got ppl asking here.  icon_rolleyes.gif
btw, i think my opty cant do 300HTT@ DDR600, but havent try it out 1st. it seems mostly need high vcore. anyway, im using the latest official BIOS for my ultra-d(BIOS NF4LD406). i think the latest oso nice(mebe just for me larr)  notworthy.gif  notworthy.gif
*
wahhh....HTT300@DDR600 wif 2gb kit huh...i hope u can hit that la bro... thumbup.gif notworthy.gif
i'm going BIOS mode now...gonna tweak again...and again...and so on till rclxub.gif

remysix
post Jun 3 2006, 10:26 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


damn...really no luck yet wif mine...wont budge at all...not even at 255@3448...
remysix
post Jun 5 2006, 02:30 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Jun 4 2006, 12:15 AM)
wow!! u mean ur speeding at 3.4Ghz??  sweat.gif   sweat.gif
*
QUOTE(kianwee @ Jun 4 2006, 09:17 PM)
3448 = 3-4-4-8
*
doh.gif doh.gif biggrin.gif ...how i'd wish that would be possible...i meant the 3.4ghz on air part whistling.gif

QUOTE(swgiant @ Jun 5 2006, 02:16 PM)
@remysix, luckily iam better than you. with 1:1, the max speed for the ram is 271MHz
*
icon_question.gif can only do 253@3-4-4-8...tried so many settings already using 0704bta then 0406(2006) bios...then flash to 623Final...still no go...as i read that this UCCC didnt generate too much heat as it's cousin TCCD, so i think temp is not the issue and btw, already have 2x80mm blowing on it with extra help from my 120mm cpu-fan blowing down...
thinking of letting these stick go and re-plug my tccd...that tccd can do 308fsb...but it's 1gb kit...haiya, really no luck la this one...but will try my luck again
if not, garage sale la doh.gif cry.gif cry.gif

This post has been edited by remysix: Jun 5 2006, 02:32 PM
remysix
post Jun 5 2006, 03:57 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(swgiant @ Jun 5 2006, 03:34 PM)
Damn, my mobo cant do 1T/2T memory timing manually. Have to adjust the RP and MAL to make it run at 1T timing. But cant find any value that suite my current settings... sigh, poor mobo.
*
oittt...what mobo r u using...cannot set it manually...so what did ur 271fsb earlier running at...2T???
remysix
post Jun 6 2006, 04:59 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


hmmm...i switched my ram sticks in the orange slot (A to B and B to A)and voila, memtest86+ pass 260@3448...
gonna push it higher... wish me luck! thumbup.gif
remysix
post Jun 6 2006, 05:54 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Jun 6 2006, 05:15 PM)
tat was nice. i think i need to stop OC'ing my system for now until i manage to get better cooling, mebe ninja. my XP-90 seem useless to be paired wif opty or mebe my opty batch was hot  laugh.gif
*
how hot r u...i meant the proc la not u literally tongue.gif
i'm using xp120 wif delta thundering laugh.gif ...idle at around 37-39 depends on night or day time...full load around 49-51...same temp as my chipset one...
ops...kinda off-topic already la doh.gif

This post has been edited by remysix: Jun 6 2006, 05:55 PM
remysix
post Jun 6 2006, 06:18 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Jun 6 2006, 06:04 PM)
hahaa.. when my xp-90 paired wif any athlon64 family tat i ever used, idle around 34c-36c, while on-load can get 52c-54c onli. but, since the day 1st i use opty(170) idle temp was 40c-43c, while on-load over 60c. aint it hotter??

current situation is same oso.. wonder Y  sweat.gif  sweat.gif
*
aiya bro...need me to tell u ka...

mine: AMD 144
urs: AMD 170
mine: Idle 38c
Urs: Idle 40c
mine: single core
urs: dual core

and why dun u guess which part of the processor that produce those huge amount of heat? tongue.gif whistling.gif
remysix
post Jun 6 2006, 06:29 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


ooo like that one aaaa...hehehe...silly me...
so faster la get the ninja one...also thinking of getting the ninja or big typhoon...but wif only around 2-3c drop from my xp120...doesnt really make it any diff in my oc la...

 

Change to:
| Lo-Fi Version
0.0171sec    0.29    7 queries    GZIP Disabled
Time is now: 28th November 2025 - 09:40 AM