Yokomo International Drift Meeting

Update: new venue for YIDM 2013 @ Singapore
Dear Drifters,
We are pleased to inform that AutoDrift has managed to confirmed the new location for the event. Details as follow:

The New Venue: Kovan Hub, Hougang St. 21, Paya Lebar.


Dear Drifters,

We are pleased to announce that the following Malaysian drifters are qualified for representing Malaysia to participate in YIDM 2103 @ Singapore from 18th - 20th October 2013.

1. Azwan / YOKOMO DPM / Ukomo
2. Ah Ngu / YOKOMO DIB / RCL Bintulu
3. Acom / YOKOMO DMAX / YOKOMO M'sia
4. Addie Gustor / YOKOMO DIB
5. Awie Lee / YOKOMO DIB / Wei Hobby Zone
6. Cham / YOKOMO DIB / Team Max Power
7. Amran / YOKOMO DPM / Utara RC Drift
8. Billy / YOKOMO DIB / EXE Team
9. Avun / YOKOMO DIB / Drift REVO
10. Simon / YOKOMO DIB / RCL Bintulu
11. Muza / YOKOMO DPM / Ukomo
12. Alim / YOKOMO DIB / EXE Team
13. Pae / YOKOMO DIB / YOKOMO M'sia
14. Ary / YOKOMO DPM / EZ Life Solutions
15. Ajim / YOKOMO DIB / EZ Life Solutions
16. Neun / YOKOMO DIB / YOKOMO M'sia
17. Aza Fuhren / YOKOMO DRB / EZ Life Solutions
18. Jaa / YOKOMO DMAX / Kuchai Tokyo
19. Eizwar / YOKOMO DIB / Drift REVO
20. DiDi / YOKOMO DPM / W.A.R.I.S.

These drifters have qualified within the top 20 drifters using licenced YOKOMO drift chassis during the recent Pre-YIDM 2013 Malaysia Final Round. Congratulations.

To confirm your seats, please make the entry fees payment of SG$120.00 to us before 20th October 2013. After 20th, we will open the seats to other interested drifters.

Please contact us for payment details. Thanks.

Yokomo International Drift Meeting: Controlled Motor for YIDM 2013 @ Singapore
Yokomo International Drift Meeting: Controlled Motor for YIDM 2013 @ Singapore: Dear Drifters, The motors are in the preparation! Speed Passion Competition V.3.0 Brushless Motor 10.5T

Sell any solid axle for R31?

Sorry. We don't have any Street Jam parts. Perhaps you can contact Drift Garage in Puchong.

Don't have a catalog?

You can check out our blogs at the following :

Team YOKOMO Malaysia
Hobby Haven

We update our products from time to time. Thanks.

I wish to joining MNC EP Touring and M Chassis Round 5 (3Stone RC Park, Glenmarie). How to join and who should i contact?

Pls Visit;

http://www.rctech.net/forum/malaysian-r-c-...-round-5-a.html

Thanks

Some Update from compition YIDM in Singapore last week:





Pls Visit our blog for more detail:
Yokomoidm.blogspot.com

Product Update



Colored Rod End ( DRB-206W - special ) are in stock. Please contact us for details.

PRODUCT UPDATE:


Speed Passion Reventon Pro 1.1 + Competition V3.0 Combo




PLS NOTE: Reventon Pro 1.0 is no longer in production.

ELAN R ACDC CHARGE IN STOCK



Specifications:
Operating voltage: DC 11~16V / AC 100 ~240V (50.60Hz)
Output port: Single
Charging current: 0.1 ~ 15A (Max. 180W)
Discharging current: 0.1 ~ 7A (Max. 30W)
Size: 178mm x 151mm x 86mm
Weight: 1070g

AND

ELANGEAR POWER BRIGH

New accessories from Team MaxConcept
We have the following in stock. These are New items which is popular among RC drifters.





Pls Contact/PM use for detail

NEW BD7 2014 ARRIVED



Lightweight graphite resin suspension arms and the change of the motor mount
to both the high level response and a sense of stability!

　BD7-2014 to benefiting from home-European touring car, die a normal evolution of true. Japan, as well as to prove their ability in a race around the world, while rivals take each year lag, ticks away brilliant step to the next stage in one step ahead again.
Place in the center of the chassis motor mount, redesigned the shape of the steering bell crank, while improving the driving feel, 2014 has achieved a balance of grip and cornering speed. Also, I give a hard anodized lubrication of high quality in shock cylinder, greatly reduces the resistance of the internal shock, gap of road surface slightly to absorb flexibly, operability also significantly improved. It plays a better response with a lightweight graphite resin before and after suspension arms and hubs, as well to the knuckle. Also, in addition to the standard kit of blue anodized, black series with a brightness such as the black diamond a certain dignity as (limited model) special edition this time comes!!
BD7 ran also looks even reached into the realm of art at last!








Black anodized and
promote the low center of gravity and optimization of chassis rigidity ● new design motor mount
to expand the ● Gear ratio setting width, and corresponds to the regulation a variety of
● using lightweight graphite resin hub suspension arms, front and back, the knuckle
and a whole new ● steering bell crank, adaptable to changes in the suspension alignment
reduce the resistance of the shock inside the shock cylinder which gave ● hard lubrication anodized
■ competition 4WD belt drive touring car
in the parts of the configuration ■ symmetrical optimize the twist of the chassis
■ Separate aluminum suspension mount (front rear side, rear front)
■ Front aluminum solid axle
rear gear differential ■
■ lightweight plastic cam belt tension
before and after ■ stabilizer standard equipment
■ large capacity aluminum oil shock

Speed Passion LM-1 LeMans Car Kit

Coming soon in MALAYSIA










1/10 LM-1 LE MANS CHASSIS SPECIFICATION
Length: 370mm

Width( Front ): 195-200mm ; Rear: 200-205mm
Wheelbase length: 275-280mm
Carbon reinforced suspension components are standard.

It will be packaged with Speed Passion Reventon Club Race combo + Motor, Body, and Tires. Please wait for the price announcement soon.

Team TEKIN new ESC - RSX series
Team TEKIN has launched the latest RSX series of ESC for the highest level of competitions.



Features:
Billet Aluminum Heatsink Housing
Optional Fan Shroud System and High Speed Fan for Maximum Cooling
Ultra-smooth and Precise Throttle and Braking Control
Compatible with Sensored/Sensorless Brushless and Brushed Motors
Easily Access Programming, Anywhere, Anytime
Datalogging Capability
High Voltage Programmable BEC
EZ Access HotWire Programming Port
HotWire PC Interface for Advanced Programming and Updating
D2: Dual Drive Mode Technology
On-Board Temperature Indicator
HDAC: High Density Copper PCB's
Sensor Plug for Precise Commutation with all Motors
Gold-plated Solder Posts for Easy Wire Replacement
Self Test Diagnostics and Factory Reset
Pit Tune Mode
DGF2: Digital Glitch Filtering V2
QuickTune™ Programming
One-Touch Radio Calibration

Specifications:
Controls: Forward/Brake/Reverse
Input Voltage: 4-9 Cells, 2S-3S Lipo
BEC: 6.0v / 7.4v 5.5amps
Motor Limit Brushless Mode 2S: 2.5 Turn 2-pole, 4lb chassis
Motor Limit Brushless Mode 3S: 8.5 Turn 2-pole, 4lb chassis
Motor Limit Brushed 2S: 6 Turn, 36mm Can
Motor Limit Brushed 3S: 12 Turn, 36mm Can
Max Current: 180amps per phase
Timing Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 31.2 x 37.2 x 21mm
Weight: 42g


Please contact us for more information.

We have an international RC Drift event coming in April. The venue is in Kluang, Johor.



Do follow us on Facebook and Blog.

Facebook: Hobby Haven FaceBook Page
Blog: Yokomi International Drift Meet Blog