ahh.. yes.. tq
studying it now..

tak tak tak VIM sound will occur after full warm up (blue temp off).
it is confirm from VIM coz i have done troubleshooting.

of course abit tinggi coz profile 50% height from width. 205 need 45 (or 40) profile tyres.

hah.. yes.. aspect ratio.. forgot the word..

same code ecu number?
the ecu have built in immobilizer. u need to find someone/workshop that can 'recode' ur 2ndhand ecu with ur remote.

if want to buy 2nd hand ecu, best to buy with the immo chip together inside the alarm remote.
its just a small removable chip inside remote

its quite difficult to dismantle the headlamp. especially to remove the headlamp from car. have to remove the bumper 1st.
thats y most shops only sell without install.

yep.
i have done half dozen neo headlamp to changed the projector to dedicated HID projector.
i think most time consuming is to remove and install back the headlamp..

removing bumper is the difficult part.. screw and those plastic clip..
if u r on std non cps bumper easier, coz plastic/PU bumper. CPS bumper made from fiber.. so its quite hard to maneuver the side part at the fender..
some more with R3 lips.. bottom already got 6-8 screw.. ahhaaha.

Proton SP III or Petronas XP3 or any other SP III spec atf oil.

got nut meh?
iinm, its using wing nut, can just unscrew using hand. if not, usually size 10 nut.

btw, im looking for cheap2 used neo tail light also.. anybody got spare to let go..

This post has been edited by Max: Mar 1 2015, 09:34 PM

ya expensive..
new can get rm115-130 pc


looking for door visor too.. anyone know where to get?
those at acc shop looks like kedai abang only.. thin and flimsy..

This post has been edited by Max: Mar 2 2015, 10:02 AM

haha.. lol.. sori.. i thought u wanna sell..

i want to open abit window. damn hot.. always park open space/non roof parking.

hmm.. check for cracks or bulb socket seating.. maybe not seal properly.

changing FD for cps now only rm2k. but u need to trade/swap ur gearbox.
take around 2-3 hours job according to workshop.

up to owner..
mivec gb got abit different ration on certain gear if not mistaken.

for auto cannot rojak'ing gb.
people usually rojak on manual gb. can change certain gear to suit owner.. or based on experience mechanics.

change dashboard? dashboard not related to gb.
btw, now got alot neo change to evo 7 dashboard.

like this..
got some other pics. but in another pc.

heres another 1.
evo8 dash.

solving water leaking into cabin/floor near door.

as posted earlier in this thread.
after heavy rain, some owner reported water leaking into cabin near door sill.

this is my car. got a chance to find out where the water comes in.
water traces between door 'skin' or panel and under the door.




as i suspected, when raining, water seeps thru outside door glass and drips at the bottom end of the glass in the door.
then it drips on to the speaker and leaking thru the speaker bracket/holder.
after 'puddling' at speaker holder, it then seeps thru door frame and speaker holder, resulting in water dripping into the cabin.



what i had done is putting thick plastic (rice packaging) behind the speaker holder.
double tape, rice plastic packaging, masking tape.



putting back the speaker, the plastic had to fold downward, protecting the speaker and the speaker holder.
btw, make sure the plastic when folded fully covered, or better if extend downward more than the speaker holder.
*sorry no pics of this.

after this mod, water dripping onto the speaker holder will directly go down directly into bottom of the door.
at the door bottom got water outlets that let water flow outside.


hope u all understand..

This post has been edited by Max: Mar 20 2015, 11:54 AM