Fan Cable To Molex? Light?, Which and How? Where?
|
|
  May 13 2006, 12:04 AM, updated 20y ago
Show posts by this member only | Post
#1
|
 
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7   
|
My friend gave me a casing with 2 built in fans inside, as the fans were usually controlled by the veraboard, but since it was burnt and malfunctioned, the fans are not working each time the pc is started.
So, my friend as me to mod it, and AFAIK, the wires can be cut and put inside the female molex... But which hole and how do I do so? I'm newbie in this... Plz teach... Thanks.  Wat and where to get those led inside those modded fan?? How much for those?? *If I have posted in the wrong section, mods plz move it to a respective section. Thanks in adv*  This post has been edited by eXPeri3nc3: May 18 2006, 10:27 AM |
|
|
|
|
|
May 13 2006, 07:36 AM
Show posts by this member only | Post
#2
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary  
|
bro,
is the fan working ? or the fan hangus already ? the veraboard controls the fan is it ? Just Potong the FAn's Wire.... Connect the RED Fan Wire to THe Yellow MOLEX wire and BLACK to THE BLACK  GOOD Luck |
|
|
May 13 2006, 04:21 PM
Show posts by this member only | Post
#3
|
|
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7
|
QUOTE(zahri @ May 13 2006, 08:36 AM) bro, I'm not sure if the fan is hangus or not...And yeah the verabod controls the speed and operates the fan, and I dunno to conenct which is which... is the fan working ? or the fan hangus already ? the veraboard controls the fan is it ? Just Potong the FAn's Wire.... Connect the RED Fan Wire to THe Yellow MOLEX wire and BLACK to THE BLACK GOOD Luck   I'll try, as I gone back home and the casing is in the campus... Thanks in advance... |
|
|
May 13 2006, 05:33 PM
Show posts by this member only | Post
#4
|
Senior Member
3,807 posts Joined: Jan 2003
|
just cucuk the red(fan) to the yellow(molex) and black(fan) to black(molex)
make sure the fan is 12V...  |
|
|
May 13 2006, 07:23 PM
Show posts by this member only | Post
#5
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
i am sure the fan is 12v
hehehe.... GOOD LUCK |
|
|
May 13 2006, 07:40 PM
Show posts by this member only | Post
#6
|
Senior Member
2,095 posts Joined: Oct 2005 From: 2�18' | 102�23'
|
i tot u got eXPeri3nc3...!!!! hehe just joking
  |
|
|
|
|
|
May 13 2006, 10:37 PM
Show posts by this member only | Post
#7
|
|
Senior Member
861 posts Joined: Oct 2005
|
Very easy mar. Yellow is 12v, red is 7v, black cables are ground if i am not mistaken.
|
|
|
May 14 2006, 09:19 AM
Show posts by this member only | Post
#8
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
correct lan evo...
but where is the thread starter.... has he tried it out yet ?? |
|
|
May 14 2006, 10:04 AM
Show posts by this member only | Post
#9
|
|
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7
|
QUOTE(amyhs99 @ May 13 2006, 06:33 PM) just cucuk the red(fan) to the yellow(molex) and black(fan) to black(molex) Ok, if the fan is not 12V?? make sure the fan is 12V...  OT* - No need say u wear green hat geh... QUOTE(zahri @ May 13 2006, 08:23 PM) i am sure the fan is 12v K hehehe.... GOOD LUCK QUOTE(2uk3y @ May 13 2006, 08:40 PM) i tot u got eXPeri3nc3...!!!! hehe just joking Adui... I only purge casings before... QUOTE(zahri @ May 14 2006, 10:19 AM) correct lan evo... NO, I'm going home now, a few hours before boarding the bus but where is the thread starter.... has he tried it out yet ??  And also, the casing only has a power supply and a casing... No mobo and such... How to test then?? Any special steps? Or can it be test at the first place? Thanks... |
|
|
May 14 2006, 03:21 PM
|
|
Senior Member
3,807 posts Joined: Jan 2003
|
QUOTE(LanEVOchris @ May 13 2006, 10:37 PM) Very easy mar. Yellow is 12v, red is 7v, black cables are ground if i am not mistaken. FYI, red is 5v instead of 7v |
|
|
May 14 2006, 09:28 PM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(eXPeri3nc3 @ May 14 2006, 10:04 AM) Ok, if the fan is not 12V?? erm.... OT* - No need say u wear green hat geh... K Adui... I only purge casings before... NO, I'm going home now, a few hours before boarding the bus And also, the casing only has a power supply and a casing... No mobo and such... How to test then?? Any special steps? Or can it be test at the first place? Thanks... why dunt u try it out on another casing which has mobo installed... ( or on a working pc ) just plug the molex connector once u have connected the fan wires to a molex connecter |
|
|
May 15 2006, 03:12 PM
|
|
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7
|
QUOTE(zahri @ May 14 2006, 10:28 PM) erm.... Sweat... My home desktop @ home not at campus... why dunt u try it out on another casing which has mobo installed... ( or on a working pc ) just plug the molex connector once u have connected the fan wires to a molex connecter can I put a conductor between the green and black port of the power supply? I recalled someone told me to use this way to test the power supply, so supposing the power supply is running without mobo... can or not?? |
|
|
May 15 2006, 03:33 PM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
i think there is a way for u to manually start the power supply without using a mobo
but i am not sure which wire to tap... try searching around, i just came across it yesterday.... |
|
|
|
|
|
May 15 2006, 03:38 PM
|
|
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7
|
QUOTE(zahri @ May 15 2006, 04:33 PM) i think there is a way for u to manually start the power supply without using a mobo I searched... but in vain...but i am not sure which wire to tap... try searching around, i just came across it yesterday.... Anyone can help? |
|
|
May 15 2006, 03:53 PM
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(eXPeri3nc3 @ May 15 2006, 03:38 PM) I searched... but in vain... on the 20/24 pin atx connector...connect the green wire to any black wire....Anyone can help? can read HERE |
|
|
May 16 2006, 01:23 PM
|
|
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7
|
QUOTE(mADmAN @ May 15 2006, 04:53 PM) Wow, thanks!! I'd appreciate it! Hmm, just put both wires into it and see that will it run or not?? Should I tape the wires to the molex? And also, let's say it's working, just a celephone tape to tape the wires? Or how?? Any other ways? Coz celephone tape sticking is way not nice.. Thanks, will let you all know the results. |
|
|
May 16 2006, 10:37 PM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(eXPeri3nc3 @ May 16 2006, 01:23 PM) Wow, thanks!! I'd appreciate it! put the red wire of the fan into the yellow wire molex and black wire to the black. Hmm, just put both wires into it and see that will it run or not?? Should I tape the wires to the molex? And also, let's say it's working, just a celephone tape to tape the wires? Or how?? Any other ways? Coz celephone tape sticking is way not nice.. Thanks, will let you all know the results. U can tape if u want no problem... |
|
|
May 16 2006, 11:29 PM
|
|
Senior Member
3,807 posts Joined: Jan 2003
|
is me tat told u the black green method... lol
just cucuk the wire inside... if u wan nicer... ask AllnGap where 2 buy molex and connect the fan cantik cantik...  |
|
|
May 17 2006, 10:40 AM
|
|
Senior Member
9,257 posts Joined: Aug 2005 From: Not so sure myself Status: 1+3+3=7
|
QUOTE(zahri @ May 16 2006, 11:37 PM) put the red wire of the fan into the yellow wire molex and black wire to the black. U can tape if u want no problem... QUOTE(amyhs99 @ May 17 2006, 12:29 AM) is me tat told u the black green method... lol I've seen ppl's casing[not cacing just cucuk the wire inside... if u wan nicer... ask AllnGap where 2 buy molex and connect the fan cantik cantik... ], they hid their fan cable very nice, need not tape, and yet it won't fell out, it is like 2 cables mounted into one and *cucuk*-ed into the molex... Is that they take out the ori cable and pierce it and mount it together?? |
|
|
May 18 2006, 06:48 AM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
owh...
i think they used heatshrink or Cable Sleeving kit u can refer to the sticky , a guide to sleeving psu, can be used to sleeve a fan's cable too... Good Luck |
| Change to: |  0.0185sec
 1.75
 5 queries
 GZIP Disabled
Time is now: 19th December 2025 - 02:16 PM |
Quote