What is Project : Air ?

It's gonna be a tj08-e build.

I rarely see any tj08-e worklog. Big fan of MetallicAcid's tj-08.

Mine is going to be simple and I'm gonna pay more attention on small details.

I'm going to use black and red theme believe it or not.

Never owned a ROG Board, so why not?

I'm gonna use black as my main color.

With a few red highlights like my fan's led and board's led.

I'm moving to England to study.

I need a fully working hardcore pc.

I mean I love my Package build but it's in Malaysia.

Since I have a titan just collecting dust so why not create a air-cooling build.

So since I'm travelling, I picked a small form factor again.

I normally hate small form factor cases but I hope I can do it justice.

Things to expect in this build is that this build is going to be around 1 to 2 months.

I have most of parts here.

You will expect disaster, a little bit modding.

Some types of rant.

You will expecting a very clean build.

Meaning no airbrush or any airbrushing details.

Only spraypaint will come close to this.

A very special window I have planned.

Aircooling

Motherboard first. I love the gene because of the amount of power it packs in such a small form factor.

Plus I love the supremefx led so I have to have it.

So much delay but it's finally here.

I also love the accessories especially the doorknob message thingy.

Enjoy the pictures.

Processor is here and the box looks so ugly.
But onto the processor. Feel the same and look the same so yeah.
Enjoy the pictures. Can't get the small words in the processor because of lighting issue.

The aircooler I chose is the silverarrow (non-extreme).
I love the heatsink design and to anyone who wants to know, it didn't block the ram dimms in pull.
I replaced the stock fan with enermax red led fan.
And picture of my corsair platinum 1866ghz (there will be mod on this).
Enjoy the pictures.

Ok, time to do some modding / designing.
First picture would be the original ram with the sticker taken off.
I then took off the top heatsink, it's easy to remove with a small allen key.
After that, I took the heatsink and painted it black.
After that, I took some scotchbrite 3m pad to sand it to give it a paint tearing like look.
It looks what I wanted. So I put it back and install it back.
Enjoy the pictures.

Ok time for some modding.
I love clean build. I really do.
So I notice the bottom is very messy.
And the psu placement has the silverstone logo.
I don't like it, let's do something about it.

I got wired sleeved.
It's all black. Enjoy.
I didn't put pic for psu because it's gonna get covered.
If you're curious, is AX860.
Here's a quick sleeving shot.
Next update is the installation of the motherboard to the case.
Enjoy the pic.

Motherboard gets installed and I reapplied my thermal paste on a straight line.
Enjoy the random pictures. Next is my paint on the titan.

Ok, titan update.
I hated the green led.
It doesn't match my build theme so why not just paint it red.
Ok the bad news that I have is that I broke the cover of the side.
If you can see closely, you would notice it have broken off and left like half of it.
I don't mind because it's gonna be a dark red build so you can barely see it at the end of the build.
And if you see the second picture, you can see that some paint marks on the left.
Note to self, never touch paint and be patient when drying.
So, I decided to use a scotchbrite 3m pad to scuff up the surface to give a brush aluminium look.
To me, it looks beautiful and I frosted the acrylic.
At the end, I'm quite satisfy with the result.
Next update would be the window.
Enjoy the pictures now.
And YES, It still works.
Last picture shows it running.

Just a mini update.
IT IS MADE OUT OF BRASS.
Though abit offtopic,
It's gonna be use to measure my case.
I'm gonna use it in something you would not expect.
Signed by the one and only Bill Owen.
Thanks Bill if you are reading it.
This ruler is one of two Bill has ever build. (he claims)
Stay tune and enjoy the pictures.