Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
7 Pages < 1 2 3 4 5 > » Bottom

Outline · [ Standard ] · Linear+

 LYN Proton INSPIRA Owners and Fans Thread V56!, MDM,JDM,CDM,PKM,MCH,SSH,SHY!

views
     
animegod
post Jul 3 2013, 09:38 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(ngjx @ Jul 3 2013, 09:08 AM)
Your lala need to use inhaler Liao..
*
asthma is it? omg.. my poor lala
animegod
post Jul 3 2013, 10:31 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(mercury99 @ Jul 3 2013, 10:12 AM)
air con compressor draws power to make it run. this is normal. to recover this power, turn off air con lo
*
at last.. got sifu understand how to prevent asthma.. but last time not like this 1 wor..
can cure or not ah?

It happens this morning since raining ma.. temp low outside.. but my body temp always very high 1, so need adjust to 24c..
my lala seem like shiver alot coz it's cold.. like losing it breath sometime.. i worry it suddenly die.. rpm can go as low as 500rpm.. I pity my lala want blanket it oso, but i need aircond and need go to work ma..

I remember last time when my lala still young, it din shiver so much 1... no matter cold or hot outside.. RPM oso very very rare can go as low as 500rpm 1.. maybe the juice getting low? no? I gave my lala vitamins in voltage stabilizer and grounding kit liao.. but seems like it become more sick now..

please help my lala.. (need tabung to collect donation or not?)
animegod
post Jul 3 2013, 11:40 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(mercury99 @ Jul 3 2013, 10:48 AM)
sorry i'm unable to follow your salt and pepper story. could you explain without all the salt and pepper?

you mean the problem is during idling when air con is turned on, the idling RPM is very low? (from one sentence can make until one long story  sweat.gif  doh.gif  )
*
yes bos.. when idle and on 'D' gear.. to minimize usage on sexpensive CVT Gb.. to prevent wear and tear, I left if at 'D' even when idle.. so Rpm go very low ler.. 500rpm is the record lor... especially after compressor 'tak' sound..
very sadding like this.. feel like lala cant breath..shivering before it suddenly can breath again.. imagine the joy when it breathes again.. just that i feel sad it has to suffer this way.. i always thought what if it suddenly stop breathing then cant breath again.. so I thought I must prevent the occurence of losing its breath.. biggrin.gif

all write short short sentence oni.. very bored to read ma.. i write long long abit tell a bit story lor..

animegod
post Jul 3 2013, 01:35 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(xi4n9 @ Jul 3 2013, 01:23 PM)
Thanks for the heads up. biggrin.gif
But what's the main top 5 mods to do in a 2.0e?
Inspira don't come with ASC? So what's the replacement from proton? biggrin.gif
*
Proton got Aku Cengkam Sendiri to replace ASC..
and also Aku Brek Sendiri to repalce ABS

anyway, my auto wiper sometime activate itself even when no rain wor.. why ah..
when got bird shit reli scary lor.. it will auto wipe ma..
animegod
post Jul 3 2013, 02:45 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(R.Y.D.E.C.K @ Jul 3 2013, 02:26 PM)
can these mods done to my 1.8Mt?

13. Side folding mirror. Required additional module to control. Want to explore customizing the ETACS .. no volunteer for the ETACS ..

16. Projector headlamp - Plug n play

18. Auto headlight leveling - require gyro and ecu. Rewiring and activation

23. Automatic climate control - require sensor .. plug n play

>>>ETACS explore no white mouse?wut we can do more with these ETACS explorations?
*
Pls stop now.. you are abt to step into the lion's mouth.. There is no end to it.. the list is actually very short only, there are more mods, they purposely didn't put here.. once you're trapped, they will reveal it to you so u got no way out..
animegod
post Jul 3 2013, 03:20 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(K3nnYkl82 @ Jul 3 2013, 03:19 PM)
no ..
the moment u buy an Inspira + read the lynspira thread .. u are already dead ..

the Lynspira TT has been on going for pass 2 years and still going ... every week rain or shine or anything ... we still there .. so u can see how heavy the poison .. lolz
*
I feel sorry for those who are trapped and cant find a way out.. there's no salvation for u guys .. tongue.gif

animegod
post Jul 3 2013, 03:38 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(mercury99 @ Jul 3 2013, 03:31 PM)
got. sell car.
*
I think that wont solve the prob.. Knowing these ppl, even the old volvo they will find a chance to mod if they got no better things to do.. biggrin.gif
animegod
post Jul 3 2013, 04:50 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(K3nnYkl82 @ Jul 3 2013, 03:41 PM)
erm .. u mean u have to kill me to resolve this ?  blink.gif
*
I dont think so.. poison spread too much already..
Now, any of the old timers there at TT can take over to become the lead.. and spread the poisons..
Anyway, there are a few kind souls that dont spread poisons lar (me) tongue.gif

This post has been edited by animegod: Jul 3 2013, 04:50 PM
animegod
post Jul 3 2013, 05:01 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(K3nnYkl82 @ Jul 3 2013, 04:54 PM)
you dun spread .. but telan it rite ? lolz
*
that's right.. sad.gif
and that is the most kesian case from all those who kena poison..

Let me show it terms of calculation equavalence ( from my own theory) :
E = IR;

E = poison, I = poison spreading, R = resistance to spread..

Me, R is high, although E is high, I absorb almost all.. therefore, I=poison spreading, is very low and negligeable

This post has been edited by animegod: Jul 3 2013, 05:02 PM
animegod
post Jul 4 2013, 08:46 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(jnick @ Jul 3 2013, 11:35 PM)
https://forum.lowyat.net/index.php?showtopi...&#entry61491901

Ppl said Inspira using low quality stuff ahhhhhhhhh
Lancer GL is what?
Kenny..... Sexplain plz!!!!
*
wei.. u guys not enuf troll here, go troll other ppl thread ah.. why do like this?
If wan troll there, do it properly lar... biggrin.gif
the sexifaction lvl is not good enough..
animegod
post Jul 4 2013, 08:59 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


oh.. forgot to share my story today..

This morning, raining very jam and cold outside..

My lala cant breath again.. kesian it..
But.. today got new sickness again.. never ending 1.. I think my lala is slowly revealing it's mixed breed bloodline, causing the same prob as one of its problematic parent..

Ok, going to the main issue now..
So, since raining this morning, my headlight auto on as usual since it's dark outside. Then I thought, the road is a bit dark as well, so want open my cheapo fog light as well.. so I turn the cap with as little torque as possible, so not to ruin the relay switch..

But hor.. no light came out and the dash din show the foglight on signal..
It got me worried.. so i turn the headlight to on manually, then off...
then on and off the foglight switch.. all with minimum torque..
but to no avail.. It refuse to react.. but my signal lights, etc is working..
when turning the cap to above the 'Auto' label, the headlight turn off which it shouldn't.. only the top label will turn on the light manually. When going back to Auto, then it turn on as well..

After a while playing with the relay switch.. suddenly.. the foglight can turn on.. then i try on and off can work adi.. the middle label after 'Auto' headlight oso will turn on the headlight adi..
I reli cannot brain what is happening here.. Lala got too cold, sneeze at times and refuse to response?

This sickness i reli dunno how to sexcribe d... Maybe some sifu got good exp can sexplain..


animegod
post Jul 4 2013, 09:44 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(K3nnYkl82 @ Jul 4 2013, 09:32 AM)
fog light are link to ur main light la
U need to on small light to on ur fog light. Cant juz om the foglight
*
Did liao.. small light auto on coz it's dark.. then I turn turn the cap for foglight but it wont turn on..
so I manually turn on the small light then, try turn on the foglight still wont on.. after like 10 mins playing with the small light and foglight switch oni suddenly it turned on.. now everything works fine..

but dunno why sometime it doesn't work.. which makes me worried..

So based on my assumption lar.. EE kampung knowledge lar..

E = IR;

P = IE, so P = I * I * E

so maybe, got some resistance that cause the loop to be opened.. like rain water? vapour? or the relay switch got abit rusty or oxidized, so even when connected the resistance is too high?

P = 0, circuit not closed = no power since no loop?
I = E/R with R too high causing (I) very low, so it affects P, then device not enough juice to turn on?

This post has been edited by animegod: Jul 4 2013, 09:47 AM
animegod
post Jul 4 2013, 04:14 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(ngjx @ Jul 4 2013, 03:33 PM)
Err... Auto light can on the small light??
*
yes bro.. small light not foglight ah.. not the mega lamp oso..
set to auto it will auto on when dark.. how? not sure.. got sensor somewhere..
animegod
post Jul 5 2013, 08:18 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(Amond @ Jul 4 2013, 09:32 PM)
Anyone know where to install evo x spoiler in penang?  Roughly how much?
*
Penang got in air hitam.. search in mudah.. but dunno quality lar..

at rainbow padang serai, they got taiwan pp, abs and even oem if u want.. but prepare $$$
cheapest should be around RM400 including paint.. depends on yr negosexable skill lor..
animegod
post Jul 5 2013, 09:03 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


ok.. time for morning story..
This morning very dark as well, same as yesterday. It's getting darker in the morning nowadays, might be due to the wheater or the sun is rising from a different angle

So as usual, the auto headlamp turned on..
I remembered what happened yesterday, when the foglamp refused to response.
Therefore I took this chance to try to turn on the foglamg again..
But, as sexpected, it doesn't turn on...No response at all.

So based on my assumption yesterday, it could be the relay contact prob, getting loose or maybe oxidized.

Then I took this chance to try out the theory. The conductor when bent will loose its conductivity, when press it will become better. That is another 1 theory..

So I pushed the multi purpose switch inwards, toward the steering.. Making it tight and secure, but with minimum force as possible.. such as when you're connecting lego blocks..

Then true enough, the foglamp cap switch becomes responsive after that..
So I guess it really is the contact or something getting loose inside..
Maybe cleaning or securing the contact can DIY...I'm not sure, so need to learn more abt it..

End of morning sexperience story..

This post has been edited by animegod: Jul 5 2013, 09:04 AM
animegod
post Jul 5 2013, 09:12 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(edison1437 @ Jul 5 2013, 09:05 AM)
how come you never want to go back to Proton? icon_question.gif
*
I dont really trust them.. I've been at the EON SC far too many times to see how they do things.. For normal servicing, they can do very well. But for more technical stuff, I believe our trollers can do better biggrin.gif

Also, pls go FB watch the sexciting video.. "Dont treat your customer like shit". I waited from 9am to 4pm for servicing before, even when I booked 8am slot a week earlier. I think the man in the video really kind already. If I were there, I would try to put a steering lock in his hands, see what he will do with it.

If I can find the diagram, I will try to do it myself.. just need screwdrivers and some alcohol cleaner I think..
animegod
post Jul 5 2013, 09:45 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(mercury99 @ Jul 5 2013, 09:16 AM)
call Proton We Care. they're getting better these days. or jz walk up the the counter person and hurry him/her
*
The uncle and auntie also waiting there.. How can I cut their queue.. So we were talking abt how slow they're servicing.. 1 uncle waited for almost 5 hours for a simple oil change.. while mine is the worst lar.. the uncle said kesian me waiting so long before he left.. After that I immediately find a good mechanic shop outside and found 1.. no labour charge for oil change.. so all is good.. bye bye "Potong we dont care"... but for parts change, have to come back lar..


some more charge me RM60 for labour fee!!! Ma hai..

This post has been edited by animegod: Jul 5 2013, 09:46 AM
animegod
post Jul 5 2013, 10:08 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(mercury99 @ Jul 5 2013, 09:57 AM)
why do you even go back to proton for a simple oil change?
*
to have their chop on the service booklet.. else they will make noise if i make certain claims next time..

QUOTE(R80 @ Jul 5 2013, 10:04 AM)
which sc?
*
eon sg pinang.. not in KL lar
animegod
post Jul 5 2013, 11:10 AM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(iguana_tan @ Jul 5 2013, 10:41 AM)
Hi guys, previous post saw you all talking about Iridium spark plug.
1. R u guys using and which place can get better offer?
2. What the optimum life span for this spark plug?

K3, after install Iridium spark plug & K&N drop in filter need to do remap again?  tongue.gif  that day too excited tht forgot treat you McD, so sorry for tht.  sweat.gif
*
we are already on iridium.... K&n i think no need new map.. if need then i oso want.. hehe
animegod
post Jul 5 2013, 02:06 PM

Getting Started
**
Junior Member
93 posts

Joined: Dec 2006


QUOTE(K3nnYkl82 @ Jul 5 2013, 11:30 AM)
Got ...
Convert Evo X
Chabutz
korekted..

7 Pages < 1 2 3 4 5 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0500sec    0.55    7 queries    GZIP Disabled
Time is now: 10th December 2025 - 10:08 PM