i'm new in wc....

interest to but wc kits...... but wonder about it performance after reads some of the threads.....

i'm planning to have tt bigwater kits...

any advice from u all?

better go for the wc kit frm ngbh at garage sales... juz my opinion

agree with lichyetan.... for less money u can get better performance...

the tt sets only have the cpu blocks whereas the syscooling that ngbh sells has cpu, gpu and nb waterblocks and itll still give a better performance than the tt....all for only rm 280.

best bang for buck kit around IMHO.

i agree, go for NGBH's Watercooling SETS.



If not U can CUSTOM UR OWN ...

If not get a custom one from MEtalzone

hmmm......
thanks for the suggestion...
actually i'm thinking of bigwater SE...... but not so convince wif the performance......

ngbh still selling the kit?

I dont recommend the bigwater SE. It's a waste of money unless you just want water cooling for the sake of bling bling but no performance.
Better go for a high end heatsink.

ngbh's kit is the only one viable if you insist on watercooling coz its cheap.

remember that watercooling does not always mean you get better performance than aircooling.

If you're willing to spend upwards of RM300, you can check out some of the stuff i'm selling. You can probably just buy a waterblock, a good aquarium pump, korek a suitable radiator from kedai potong, all for better performance than low end watercooling available.

This post has been edited by MetalZone: May 4 2006, 06:58 PM

yuppp..not all WC is gud..
ithink for a low budget..better go for ngbh's bulk.. i'm oso use it
the performance is ok lar..but still cannot beat my hyper6+ ... but i luv the silentness.....so syiokkk....now can throw away my 12cm delta fan and my 2 TT smartfan

You can always send them over to me instead. I'll pay you the shipping.

HAHA SMart MOVE METALZONE

hokhokhok..so fast..sold edi to other forumer..

cheh....

Melepas jugak aku kali nie.....

120mm fan rite ?

delta 120 mm
ttsamartfan 80mm x2

argh...

melepas....

tgh carik plak tu Fan 120mm for my RAD..

huh.. MELEPAS - MELEPAS...

takper... xder rezeki

cr AllnGap la.. dia ade jual low speed 120mm NMB fan "sunshine" color for RM25 oni... naziled summore

Erm... Kinda looking for a SiLENT but DEADLY FAN

hehehe......

My DAD gets pissed off if he hears the PC turned on , if im not at home.... huhu.....

tis 1 not so loud 1... if not mistaken oni 38.5dBa... even lower noise than Tt smartfan 2...

Nak siulent tapi deadly? Kalau sanggup belanja sen lebih skit, angkat Panaflo. Silent cfm monsters

owh.... ok... thanks...

is there any particular Panaflo Model ? i should be looking for...

i looked at a Forumer's sale/bulk. he is selling/bulking panaflo fans ...

maybe could get from him

Guys, I Have Some Question Here...
Right Now, I'm Using Thermaltake Bigwater SE... (Believe Me... It Sucks!!! )

For The Performance, Right Now, I Oced My Pentium 4 3.0E to 4GHz with 1.6Vcore...

The Temperature While I'm Using Bigwater: Idle (Overclocked): 51 degrees

Thinking of changing to Air Cooling...

Can Hyper 6 Performs Better Than My Bigwater?

And Which Hyper 6 is Better?

Hyper 6 @ Hyper 6+

Or, is there any Air Cooling Heatsink That Works Better Than Bigwater?

Please...
Need your help guys!!!

I guess you are referring to me *muka tebal*
PM me what you need. Still taking last minute order.

hyper6+ better..
and more ringan

Yes,

Exactly i am reffering to u...

hehehe.....

I think the Bigwater will work better than the Hyper 6+

A fren of mine using P4 3.0ghz Prescott. Stock speed 3 ghz.

Idle 50, Full Load @ 58-60+ ( Ttake GOLF 325 + SmartCase FAN @ FULL SPEED )

i guess urs is OCed at 4ghz IDling at 51x is not bad.

Just my 2 rupee...

If not get a Custom Watercooling Kit

hey... anyone using Coolermaster Aquagate Mini?

http://www.coolermaster.com/index.php?LT=e...80%20%2F%20R120

http://www.coolermaster.com/moreimages.php...E8U1%20/%20EBU1





need feedbacks from all Coolermaster Aquagate user: is this worth buying?
thank you!!!!

Can refer here.....
The owner used to use in on X2 .... The original thread cud not be found.....
SO this is whats left

GOOD LUCK

Credit to irenic.

Click Here....

im use R120 on my Opt b4! it good for default clock! but when u oc, it worst WC setup ever better use stock cooler lah cheh!

looks like R120 is not worth buying at all

here's my temps when pairing aquagate mini r120 with amd64 winnie back then

IDLE :



LOAD

hi moderno, thanks for posting that...

btw, do you have fan duct for 60mm to 80mm? like the adapter..
because currently i am using 60mm, the fan is small and loud...

http://www.modernopc.com/store/index.php?m...products_id=416

What temp r u getting?

there is no clip for 80mm ?

or is this stock heatsink ?

i am using old AMD Athlon 1.4Ghz... all old cpus use the loud and small 60mm fan..
need an adapter if wanna use a 80mm or bigger fan...

ermm.... i thought so u were on stock heatsink

anyways...

U can go to vampzone.com and check it out

Is there space around ur heatsink ??

ya... i oso thinking to buy TT bigwater SE oso... but heard so many bad comment abt it..

so wanna ask some qustion here
1)wt's the big causes to make this bigwater low perfomence?? izzit the water block??radiator? or the size of the tuib?

2)can we change to the other brand waterblock insted of this bigwaterSE water block?

3)can add on more like GC water block,NB block as well??

i like bigwaterSE coz is more neat and clean... juz my view

wanna hav all water cooling gurus oppinions

I am using Bigwater SE combo with TT Aquarious VGA water block for quite sometimes ....and my result is something like this ....

Stock Speed:
CPU: Idle: 32 Load: 38
GPU: Idle 53 Load 62

CPU at 3.5 GHZ
CPU: Idle: 35 Load: 43
GPU: Idle 53 Load 62

so i am not sure whether it is alright or not

anyhow ordered TR Si-120 and AC Accelero X2 from rlhh's bulk ..

should be arriving soon ...so will update the info after test it ...

for question 1,
I wud say its because of the tubing size which is 1/4, the fitiings on the waterblock is also not upgradeable to a bigger size tubing. the radiator fittings can be changed, but for radiator only. No point big tubing but small inner diameter.

for question 2,
If you can find any waterblock that fits ur motherboard and have fittings to fit 1/4 tubings. Yes , you can.

for question 3,
Yes you can add in GC waterblock, Aquarius II from Ttake. NB not sure, u have to find an NB waterblock that uses 1/4 tubing. If u use an NB or GC waterblock with the same loop as the CPU waterblock, i dunt think ur NB and GC will be cooled fully. 3 waterblock to be cooled by 1 radiator, i dunt think its enough.


GOOD LUCK....


Just My 2 Rupee....

we are still waiting for the updates

looking for quiet and good coolong solution for my PC under non Air-cond room....
especially chipset and graphi card.
seems that "ngbh" got package for CPU, chipset & GPU for RM280..
worth it??

no experience in WC anyway.. need advice.from zero to something.

Isn't 3D Gigabyte WC Kit good for starter kit? Currently using Scythe Ninja HSF and thinking want to try wc kit.

@zahri
thx for the info ya

hey i was wondering where i can find the original thermaltake coolant..the green stuff..and how much is a bottle of 500 ml?

ask moderno..i thinnk around RM40

Any idea how is the Vostok watercooling kit does??

or any Aquacomputer watercooling kit??

where can i shop for watercooling kit??