Heello, sifu2 sekalain,
i would like to ask, is it i got bad processor
i got i7 4770k with maximux vi hero with noctua NH-U14S with pull configuration (fan out of stock for push pull)
I can only kick 4.5Ghz with 1.275v and the temp pretty high around 93c on third core. Is is i got bad processor?

Linus on youtube said he can hit 4.6Ghz with only 1.2v wtf!
Im feeling very down now

Okay, i want to ask what different using intel burn test and linx?
because now Im using intel burn test, i can hit 4.5Ghz (1.255v) with max temperature 78c
But when im using prime95 it hit 93c.

if im using the LinX on the first page you gave.
I need to put maximum problem size and memory?

ok, i will post the result later.
thanks!

i dont know why.... but when i stress using linX, it stopped after 30 minutes(error) but the temp still under control (below 75c)
the vcore is 1.26v
But if i using IBT, i can stress more then 2 hours without any error or system down but the temperature will hit more then 80c.

what the ideal vcore range for 4770k?
i thought 1.26 already high on 4.5Ghz.

Edited:
i followed the cstkl1 guide using linpack 11, and i got 100c on core 2 while stressing 4.3ghz on 1.2v
i reduce vcore it wont boot up. But when im using IBT, i only got 93c max temp on core 2. Others seem fine.

This post has been edited by arerife: Aug 26 2013, 01:31 AM

This is my result 4.5Ghz/1.26v noctua NH-U14s Pull configuration
Corsair Vengeance 1866Mhz CL9 - 2400Mhz 11-11-11-30 1.62v / 2200Mhz 10-10-10-27 1.5v

But i dont know why cpu-z keep showed 1.28v. Can someone explain me about this?



Help me if i'm doing it wrong.

Thanks, it showed the correct one.
Is it my vcore too high?