after my spm result showdown...
NTBDness strike me... huhuuh cant get a job, got nutyn to do...
so i decided to DIY my pc.. spend a lil bit money to buy spray.. srews, nuts
actually... got error during the proccess.. but got no choice.. "no turning back" and "try and error" spirit are practiced

actually.. still planning to upgrade this pc
to sleeve the wires.. add rounded ide cable..
it all bout time man. huhuuhuh

so.. this is b4 Modding...




and this, after the modding.... sorry.. forget to snap pic during spray proccess





why siput kelisa???


All comments are welcomed...
any questions.. please post it k
see also my projects: http://forum.lowyat.net/index.php?showtopic=282361

loveandpeace
-fntgr

This post has been edited by fantagero: Apr 30 2006, 01:26 AM

simple paintjob did put some life back into your suput

why not paint the grilles / screws to match the casing too?

and ur old cd-rom door. just spray it black lar...

this is part of my Siput Kelisa project
http://forum.lowyat.net/index.php?showtopic=282359
actually, i've thinking to make this long time ago.. but cant figure out how..
after seeing bro ianho blowhole business... i decided to do my own.
save $$$

so.. here we go
click on the links to launch:
My Blowhole Project
MY Transparent Sidepanel Project

sorry for the ugly slideshow.. lazy to make the loading bar.. u hav to wait till it finish loading... so.. enjoy

all comments are welcomed..
thanks thanks

loveandpeace
-fntgr

This post has been edited by fantagero: Apr 29 2006, 02:11 AM

dunno how to spray the metal.....
and.. how am i gonna spray the cdroom door... huhuhuh


but will try to explore

thanks...

the plastic infront of the drive can be open..
pull off your drive out from the casing..
you will find that the cover is pinned using clips..
cungkil a bit..can get it off..

then, happy spraying..
maybe the cover is black, and the door is yellow..owesome!

ahaha.. nice.. now i know how to make blow hole.. for the side panel.. why u dont use the rotary instead of grinder?

n u really use that scrap book kaver ke? get acrylic la..

thanks for the suggestions bro...
huhuh ran out of black spray..

i thought u mod ur kelisa car.
haiz..by the way,nice casing.only need to repaint all properly.

u should have sprayed the interior black too

i'm thinking of yellow for the interior
see the casing floor... got yellow.. but not all

the side panel window cuts seems to be crooked....why not try getting some of those rubber lining to cover it up?

after sawing yr casing,
my 1st comment was, removed the cartoon sticker lah.
looks childish lah..................
but overall is better then default casing. good job.

Nice paint hob u got there .

i always wanted to do it but never got patient to wait for the paint to dry

anyway i think u should continue the case by painting the interior with yellow, really nice and unique

if u could get some those car sticker ...than u can change the theme to sport car theme rather siput whatever ....

besides get some black or yellow sleeve with uv effect and apply into ur case....surely will rock the view men

HELL LOOKING forward for more job done men

Yaha!! nice job there lots of patient involvedm ,me dare now to cut such a big whole with that method...

i used jigsaw to cut through for straight line coz faster and easier to control...

anyway get a acrylic piece to replace the transparent glass of urs men ...

Should be RM15 for a piece of that size

err.. dnt understand the bold one....
which part u want me to use rotary??

great... post ur blowhole picture soon will ya...

this method is for those that doesnt hav jigsaw...
the tools available, because my father works wif metal for his freetime..
but no jigsaw as jigsaw usually for carpenter....
so.. dont wanna spend $$ for my simple project.... save money to buy nu rig
huhuh how am i gonna cut the acrylic wif grinder.... must use jigsaw rite....
wut rm15 only... hahhahha i thought mahal... hehheheh

thanks

thanks for the idea man....
will try to find the lining....
but where do you think can get it???? hardware shop?

unfortunately.. cant... huhuhh.. gam is the most storngest gam uhhuhuhh
that's my point... childish hheehhee

nt really . coz i spray during bad weather week.. huhuhh
so.. the colour not strong enough to hold to the casing... huhh.. but after that.. jemur for whole day.... barely cant touch coz the panel damn hot.... huuhh

will be added soon..... thanks for the idea.. that mean hav to postage.. as in my hometown, they sold black fan for rm13.. huhuh.. i ask for led one.. they dont hav... huuhuh

i'm looking to buy rounded ide cable...
is there rounded floppy cable??
looking forward to buy from vcool bulk....

no wonder it's called siput kelisa....

This post has been edited by AllnGap: Apr 29 2006, 01:18 PM

Nice work!! well done.......

omg.. i think i really need this lining

http://www.twistedmods.com/article.php?artid=169&page=2
nicely done.... huhuh
where to get arr?? can someone help

hahha actually.. my 1st plan was black and pink..
but didnt manage to get pink spray here....
so.. go to cikai hardware shop in my taman.. the spray suck man. huuhh
grab a yellow..

then i go to hardware shop at the town.... next to the shop got paint shop
sell all colour spray..
from flurocent to normal spray.. huhuuhh

This post has been edited by fantagero: Apr 29 2006, 01:56 PM

Yeah I need it too. Hardware shop got ha??

haahha.. got no idea... so decided to name it like that

thanks....

ehh..kelisa is yellow at the bottom and black on top.. more yellow than black la... hehehe.. saje nak berkire

nyway, you did a nice job there dude..

if u paint all black and only little yellow more nice la i think .. because that yellow not at good angle .

the paint combination looks like a construction sign or etc it will look better if u have the rubber linings on the sidepanel since some parts are jagged cuts.interior u can spray yellow,having Black Sleeving will match it

This post has been edited by sherren: Apr 29 2006, 03:49 PM

huhuh.. can someone get me the rubber lining.. huhhhh
dont think got in my place here.. but will try to find 2mollo

sherren. u got the lining??? sell to me

i dont have rubber lining. im searching for one too ,seen my worklog ?

huhuh.. buzz me when u found one k...
yeah seen ur worklog.. nice one

Looks nice

Once all the PSU cables are sleeved and you get nice rounded IDE cables and hide them well enough, it will look awesome.

argh dem.. i wrongly used the term there..

what i mean is why u dont use the grinder instead of driller to tebuk the window panel?

yeah.. the correct question now..

lets see some night shots with lights

naahh.. tried.. but not so good.. the led kinnda demm
wait till i got budget for my nu rig.. UV maybe
this one is NBTD modding
hahahhha
rite now no income..
thanks

now understand i thought my english really suck

coz grinder hard to handle ... . look at the blowhole.. got some out track..
wif driller.. can use driller stand.. so.. not so tired...
grinder.. need to giv presure so the metal terhakis... kinnda lenguh.... plus grinder are dangerous to eyes....

the blowhole.. 8cm.. let see if someone can do smaller hole.. huhuh eg. 4cm.... wif grinder hahha i think 8cm is the smallest.. the bigger the easier
wanna try 12 cm.. bt got no 12cm fan here

owh ic.. for a straight line oso hard a to use grinder?

huhu for 4cm fan use driller la.. grinder cutting tool dont muat oredi.. or it has smaller size?

not hard.. maybe penat... huuhh

dont think so.. if got smaller disk.. the grinder protector itslef is big

Since same project, blowhole n sidepanel thread merged here.

no so nice .......

painting suckz....

same as cutting

This words come from ur hearts?

Not bad for a 15yr old Soon you`ll be doing quality mods & quality spending hehe

Sadly, I'll have to go with the "I agree 100%" tagline to your statement.

It really shocked me when I saw the cutting quality. Pretty bad....Smoothen them with a file or some rotary tool. It's pretty bad a finishing.
The paintjob's needs to be redone as well. Sandpaper it, or use paint stripper for a much quicker job. Then spray primer, for about 3 layers and then sandpaper the primer lightly. Then respray again with paint.

You have to redo really....finish something that you start off. Don't leave it like that.

This post has been edited by pizzaboy: Apr 30 2006, 02:39 PM

tepuk dada tanya selera

my 1st mod have much more better than that.....

at least i got manage those "sotong" inside

huhuuhuh

omg... i've pass my spm..... huuhuhh

kinnda aggree wif tongyam and pizza...
because i was kinnda rush during spraying the casing..
plus.. i spray during bad weather... huhhh stupid me.
i know the cutting kinnda bad..
net time will try to get jigsaw...
i did this just to fulfill my free time....
bout the sotong... on the plan to hide it..

jigsaw for sure for my next modd

That's teh spirit.
Don't give up, we're not condemming, we're giving constructive criticism (even if it sounds slightly harsh)

hahaha.. yeah constructive criticism.. but somehow its look more to down one.. btw.. hope u can improve ur work fanta.. all the otai is here to help u.. ganbatte..

thanks for the support you all..
hahahha but need sometime to save budget for nu rig... huhuhuh
maybe hav to take long rest 1st

ahahaha, darn u bro. A Siput Kelisa... adoi!~ nice attempt tho.. thumbs up for the good effort here.

thanks...
but according to pro.. need more and more improvement.. hehehhhee
hav to wait till got extra chapalang casing to experiment with
anyone wanna give hahaha

hahaha
ok lerwww
dun be like me
cut sidepanel wit pahat
hahahaha
but at final it workin ::...
hide it with rubber lining...

Dude, u could get a decent file (around RM 5) to grind the sides. Get both the flat surface & hemisphere types. Then u r done

'll look prettier

Sorry yeah i am noob...Wat is file?....Can show some pics?

ive been searching for this thing..... huuhh
got extr a

file??? u mean disc we use for grinder or else???

file tu ialah kikir besi.....

Oic....lol the english name for it is weird

weird english name....
hehehehe

thanks for the advice...
will apply for my next modd

btw.. anyone got chapalang casing to drop at johor

Got a FEW
But in Malacca, not JB
You want?

Yeah...dats rite. Hope da pics below helps give an idea wht it is really






(Taken frm http://www.steelfiles.com/rasp1.html)

waaaaaa.. throw away free ke????
see pics please
thanks

hahahah got many in my father's laci... so damn lazy to kikir..
thanks for ur explanation...

grinder or kikir besi?
i think grinder is more better
kikir besi penat wooo

kikir besi.....

if grinder.... is the one that he uses to cut his sidepanel windows with.



hey i used the file to cleap up the blowhole i made but it was a lot of work though... not that easy

REGARDING THE LINING.

I DID mine using a SMALL CAR VACUUM HOSE.

I bought those from CAR SPARE PARTS shop.

Cut them into half erm not all the way thru, just one side of it .... right in the middle.

Sorry For using ur thread....

Here is the pic of the tube cut into half and onto the sidewindow.


* messy wires....hhehehe.... its my mum's pc.....she doesnt care, as long can use. no problem eheh......

the top blowhole with some of those hose too....



This post has been edited by zahri: May 12 2006, 11:29 AM

well done...really remind me of kelisa car..

sokong wooo..... tangan tak fit....

bro... the skru u used.. the purple one... wut people call it??? how much??
i think wanna change mine to that type...

sorry??? bro.. u gave me a nice idea... thanks
SMALL CAR VACUUM HOSE >> in car world.. whey use this as wut???

This post has been edited by fantagero: May 12 2006, 03:39 PM

bro,

the purple Screw is bought from Motorcycle Service Shops

Just go there, tell them u want to buy screw for plate number..

its around RM1.00 - 2.00 per piece. depending on size



For the vacuum hose,

it is used in the engine bay itself, to control vacuum ..

if u open up ur engine bay, sure u will see it

its black, its rubber and its all over the place.. ( looks like the aquarium tubing used for oxygen except that its black )

Hope That HELPS

thanks....
huhuh my screws.. cost me 50cent/each i think..

if u buy from hardware thats what they will usually cost

if u buy them from screw shops. specializes in screw, that will be much cheaper and comes in all different size

@zahri.. how you cut the hose straight????

erm.... how to say ehh....

example.

you are using the car's Vacuum tube.. the small black one....

u cut along the middle. from one end to one end....

use a blade ....

still need lots of improvement....

nice work dude...do the blow hole on the top of the casing also la...

good effort...keep going...

i know.. huhuhh still practising,

thank bro

colour combination makes it more........ LIVELY

@fantagero

where u get the round head sand paper thing u attatched 2 your drill?
or u wrap the sand paper around something?

hardware store obviously..
try to ask rounded sand paper... attached to the driller.. sure they know..
maybe they'll show u rotary tools stone...
or just show the picture to them
use printscreen..then store in ur hp or dgcam
hehhe that;s the best way to shop something u dont know the exact name..

omg.. so ancient.. still dont hav time for my nu mod.. dam7 uni life so busy..

Nice work dude...
i also wan to join the wagon..

But need to plan get the proper tools first..

WHen u have ferrari do show us. ekekee

the siput kelisa now with my brother.. hahhaa
dont know wut the latest news bout it

yes,, better get proper tools first..
this mod is "poor mod"
use wut avaiable from my father's tools collection... huhuh
use jigsaw k, better rotary tools.. if not, end up with dog bite... haha

but now, prefer nice black casing... weak bout colours combination.... huuhhh
ferrari nice idea.. but i prefer black bmw
thanks..

waiting for my sem break for next mod... hope so.....

is so awesome.... very proud on ur painting skills.... keep going man.... i think u still havent finished interior design.... waiting ur outcome

This post has been edited by yumiex: Nov 30 2006, 05:25 PM

wow..nice DIY man~! good job~!

ermm is nice...

huuh
thanks for the reply.. and comments guy.

being busy all the hols break.. (dam7, planning to mod my nu rig.... end up busy )
dont hav much time to do modding.. huhuh
no idea, no time, no money.... << three main aspects for modding..

now the siput kelisa is with my brother... huhuh cant continue with the interior..
i guess for a long time...

is it just me or is the pics unavailable?

broken link?

wow i tot its current thread..its been 2 years there been reborn