Welcome Guest ( Log In | Register )

7 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

 Plaster Ceiling Contractor, Plaster Ceiling Services

views
     
TSweng98
post May 6 2013, 08:15 AM, updated 8y ago

Casual
***
Junior Member
457 posts

Joined: Feb 2010


Hi all, I am a plaster ceiling contractor, planning on servicing all LYN members here

My rates for plaster ceiling are as below:

Flat board RM 2.30 per square ft
Using 9mm board and thick steel

L-box per foot run RM 9.50
Light through per foot run RM 11.50
Curtains Pelmet RM 11.50
Cornice per foot run RM 3.90
Manhole RM 55
Fan Hooks RM 30
Light Opening Normally free of charge

My rates i believe is the cheapest in LYN but please do not remember me because of my pricing

My workman-ship is guaranteed using local chinese sifus...
If you have drawings the more the better
If you want drawing services also can be arranged for a minimal fee

Payment method
Pay only for material as downpayment (Fair method)
Pay when you're satisfied with my work

Call me:

Weng 0162150898 for free assessment visit
No obligations

This post has been edited by weng98: Jun 30 2013, 07:18 AM
zxc
post May 6 2013, 05:04 PM

New Member
*
Junior Member
35 posts

Joined: Apr 2007
may i know what is the minimum height to install plaster ceiling?

and wat's the minimum height to installed ceiling fan?
IceQTurbo
post May 6 2013, 05:53 PM

Getting Started
**
Junior Member
253 posts

Joined: May 2007


Any pic of workdone?
TSweng98
post May 6 2013, 06:23 PM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(zxc @ May 6 2013, 05:04 PM)
may i know what is the minimum height to install plaster ceiling?

and wat's the minimum height to installed ceiling fan?
*
are we talking about minimum ceiling height from slab to ceiling or from floor to ceiling?

if the former then it would depends on the down lights that you are installing
eg: 6" square downlights would need an allowance of at least 5 inches from slab to be properly installed
however some LEDS would require less

if the latter den i would say at least 8 ft from floor however this is depending on site situation
eg: need to conceal beams especially for condos..
steps or recesses for side only light through designs

the minimum height for installing a fan is also depending on where the fan is
eg: if at living area at least 8ft
if on top of dining table can go a little bit lower to 7 and a half ft



some photos of my current site at Sentul Taman Pelangi

pic 1 is light through design
pic 2 is flat board with cornice
pic 3 is light through design with led lights effect.. photo is unfinished work but had since been completed

thanks all for inquiries and questions.. do call me for some serious chats about your reno works..

This post has been edited by weng98: Jun 15 2013, 07:53 AM


Attached thumbnail(s)
Attached Image Attached Image Attached Image
yanie2012
post May 28 2013, 04:01 PM

Getting Started
**
Junior Member
67 posts

Joined: Apr 2013
QUOTE(weng98 @ May 6 2013, 08:15 AM)
Hi all, I am a plaster ceiling contractor, planning on servicing all LYN members here

My rates for plaster ceiling are as below:

Flat board RM 2.30 per square ft
Using 9mm board and thick steel

L-box per foot run            RM 9.50
Light through per foot run RM 11.50
Cornice per foot run        RM 3.90
Manhole                          RM 55
Fan Hooks                      RM 30
Light Opening                  Normally free of charge

My rates i believe is the cheapest in LYN but please do not remember me because of my pricing

My workman-ship is guaranteed using local chinese sifus...
If you have drawings the more the better
If you want drawing services also can be arranged for a minimal fee

Payment method
Pay only for material as downpayment (Fair method)
Pay when you're satisfied with my work otherwise kick me out of your house

Call me:

Weng 0162150898 for free assessment visit
No obligations
*
Hi, do the price include wiring for downlight and light through?

petlu28
post May 28 2013, 05:06 PM

Look at all my stars!!
*******
Senior Member
3,935 posts

Joined: Dec 2010
Do you have calculate minimum installation? hmm.gif hmm.gif

QUOTE(weng98 @ May 6 2013, 08:15 AM)
Hi all, I am a plaster ceiling contractor, planning on servicing all LYN members here

My rates for plaster ceiling are as below:

Flat board RM 2.30 per square ft
Using 9mm board and thick steel

L-box per foot run            RM 9.50
Light through per foot run RM 11.50
Cornice per foot run        RM 3.90
Manhole                          RM 55
Fan Hooks                      RM 30
Light Opening                  Normally free of charge

My rates i believe is the cheapest in LYN but please do not remember me because of my pricing

My workman-ship is guaranteed using local chinese sifus...
If you have drawings the more the better
If you want drawing services also can be arranged for a minimal fee

Payment method
Pay only for material as downpayment (Fair method)
Pay when you're satisfied with my work otherwise kick me out of your house

Call me:

Weng 0162150898 for free assessment visit
No obligations
*
TSweng98
post May 30 2013, 07:52 AM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(yanie2012 @ May 28 2013, 04:01 PM)
Hi, do the price include wiring for downlight and light through?
*
unfortunately no, however if you need these services it can be arranged.. thanks
TSweng98
post May 30 2013, 07:55 AM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(petlu28 @ May 28 2013, 05:06 PM)
Do you have calculate minimum installation?  hmm.gif  hmm.gif
*
yes sometimes minimum installation do apply.. if less thank 800 sq ft add RM 300
this is to cover transportation and miscellaneous charges
Blizzard12
post May 30 2013, 08:47 AM

New Member
*
Newbie
4 posts

Joined: May 2012


Where is your location? Any samples of photos you can share?
TSweng98
post May 30 2013, 09:22 AM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(Blizzard12 @ May 30 2013, 08:47 AM)
Where is your location? Any samples of photos you can share?
*
we are here in the klang valley..
lizziewong
post May 30 2013, 03:39 PM

Getting Started
**
Junior Member
185 posts

Joined: Jun 2010
What about painting for the plaster ceiling?

Light trough - how do u calculate the length?
TSweng98
post May 30 2013, 04:06 PM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(lizziewong @ May 30 2013, 03:39 PM)
What about painting for the plaster ceiling?

Light trough - how do u calculate the length?
*
Painting for plaster ceiling using Maxilite paint is rm 0.50 per sq ft

Light trough is measured by per feet run

hope this answer your question.. if not please call me.. thanks
lizziewong
post Jun 10 2013, 05:16 PM

Getting Started
**
Junior Member
185 posts

Joined: Jun 2010
QUOTE(weng98 @ May 30 2013, 04:06 PM)
Painting for plaster ceiling using Maxilite paint is rm 0.50 per sq ft

Light trough is measured by per feet run

hope this answer your question.. if not please call me.. thanks
*
Thanks, very helpful.

I only plan to do plaster ceiling for the living/dining room and master bedroom only. Probably less than 400 sf altogether...
petlu28
post Jun 10 2013, 05:29 PM

Look at all my stars!!
*******
Senior Member
3,935 posts

Joined: Dec 2010
Can you quote me base on my measurement in attachment. Thanks



QUOTE(weng98 @ May 30 2013, 04:06 PM)
Painting for plaster ceiling using Maxilite paint is rm 0.50 per sq ft

Light trough is measured by per feet run

hope this answer your question.. if not please call me.. thanks
*


Attached thumbnail(s)
Attached Image
nickl3ss
post Jun 10 2013, 08:31 PM

Getting Started
**
Junior Member
90 posts

Joined: Jul 2012
Do u have email....mayb u can gif me a quote...
TSweng98
post Jun 11 2013, 09:52 PM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(nickl3ss @ Jun 10 2013, 08:31 PM)
Do u have email....mayb u can gif me a quote...
*
hi you can contact me on wengsun0898@gmail.com, thanks
petlu28 and lizzie.. replied through pm thanks..

currently am working on a few lowyat netizens home..will update later with photos.. thank you all...

This post has been edited by weng98: Jun 11 2013, 09:59 PM
netcrawler
post Jun 11 2013, 10:05 PM

Regular
******
Senior Member
1,514 posts

Joined: Jan 2005
From: Seri Kembangan


Do you do wiring and gypsum board too? I'm looking for contractor when I get the key for my condo
TSweng98
post Jun 11 2013, 10:20 PM

Casual
***
Junior Member
457 posts

Joined: Feb 2010


QUOTE(netcrawler @ Jun 11 2013, 10:05 PM)
Do you do wiring and gypsum board too? I'm looking for contractor when I get the key for my condo
*
yes can do... let me know when you're ready yah.. thanks
netcrawler
post Jun 11 2013, 10:24 PM

Regular
******
Senior Member
1,514 posts

Joined: Jan 2005
From: Seri Kembangan


QUOTE(weng98 @ Jun 11 2013, 10:20 PM)
yes can do... let me know when you're ready yah.. thanks
*
Will let you know one i get the key. Should be in August. Just wanna do gypsum board
for all bedrooms and plaster ceiling for Living and dining + wiring. How your charges
for gypsum board?
cheer83
post Jun 15 2013, 08:15 PM

Getting Started
**
Junior Member
223 posts

Joined: Apr 2008
Weng98, can you pm ur contact? I would like to do plaster ceiling

7 Pages  1 2 3 > » Top
 

Change to:
| Lo-Fi Version
0.0189sec    0.27    6 queries    GZIP Disabled
Time is now: 28th March 2024 - 04:45 PM