dripper tank use mesh ? or cotton ?

yaya i also dry burn my vivi to remove gunk ... so no need wash the mesh just empty the tank and dry burn it ..
then put in new flavor .. wouldnt it be mixed flavor ady ? contaminated with earlier flavor ?

oh ya,, dripper is use cotton ? when change flavor also no need rewick? just drop the new flavor inside ? thx

dripper can use silica wick, not cotton... using dripper, you can vape until it dry, then just simple put in another flavour u want..

o.. so between cleartomizer(vivi), aga (genesis) and dripper( duno wat brand)
the best is dripper ?

any good dripper can recommend ? dowan above 100.

plenty of budget dripper out there. igo-L, igo-S, Pegasus, Bully, clone ERA, etc.. all are below RM100..

the best?depends on your setup..I've tried lotsa drippers from cheap to high end ones and it really depends on how u setup the wick n coil..

have to think 1st .. mayb use vivi until cannot use only get new tank perhaps

ok aku nak beli brg2 ni kat legadget.

Kanthal wire
ss mesh
battery.

set up Vamo 2 ngan RSST.

tapi tak tau nak pilih sbb ada pelbagai saiz..mohon pencerahan dari otai2 sume..klu ble tanak bazir la tersalah beli hohoho

kat legadgets pun byk brg baru masuk gak,
iTaste SVD pun comei gak,
rabak lg nampaknya poket ku.

beli kanthal 32 awg. bateri beli yang ade nipple.

nak try kanthal ribbon ok gak..wire 32 or 30awg. 400 mesh is ok dah..batt tu trpulang lah, 18650 or 18350. kalau vamo yg baru dgn spring baru tu ok ade nipple ke tadak 18490/500 x dpt utk vamo sbb vamo either 2 x 18350 or 1x 18650.

atau 1x18350

tq sbb respond..boleh mohon pencerahan megenai kesan perbezaan saiz kanthal wire ngan mesh tu? dan kat legadget tu ade protected dan high drain battery..ape beza dan recommended utk VAMO 2?

for kanthal..lg tinggi resistance, lagi byk wrap perlu. contoh kalau 30awg 3 wrap mungkin dalam 1.0 ohm. 32 awg 3 wrap dlm 1.5 ohms. jd terpulang pada brapa target ohm, untuk vamo dua2 ok n target dlm 1.2 - 1.5 ohm (sbb vamo takleh fire rendah dr 1.2 ohms). so kalau amik 30awg, buat dlm 4 wraps dpt la dlm 1.3-1.5 ohms. size kanthal ni lebih penting bg yg guna mech mod sbb mech mod lg ok kalau ohm rendah, vv/vw mcm vamo kte leh adjust volt/watt die so ohm rendah kurangkan volt/watt, kalau ohm tggi, lebihkan

mesh tu kalau x silap 500 tu lebih halus n bagus wicking tp kalau jus pekat (yg byk vg) cepat gunk. so better amik 400, kt tgh2

most mech mod recommend high drain batt utk firing cantik, walaupun x protected, die safe chemistry batt sbb pakai manganese (x mudah trbakar). protected batt firing power die kurang sikit tp lebih mudah trbakar sbb cobalt based (sbb tu lah perlu protection). protected batt lebih thn lama sbb mah rating die leh tggi. utk vamo, dua2 ok sbb dpt adjust volt/watt, mech mod constant output.

My newly bought K100, to replace my lavatube





This post has been edited by eddie_lim: Apr 26 2013, 05:24 PM

no need top up cash la

There is a safety fuse for KTS or K100

here's the review:-



This post has been edited by eddie_lim: Apr 26 2013, 06:15 PM

Tank: SMOK RDA
Resistant Wire: Ribbon Kanthal, 9 wraps
Wick: 2x 2mm, unwind
Resistance: 1.6ohm

Sweet. No hotspot. Can hold more juice. Nice!!

bro..im using lavatube also, and planning to upgrade to K100 also..
mind to share the price with me?
PM also can...

TQ

Go Jalan Pasar and hunt for it, now should be < RM150; some could get RM130 and some got RM140

I have the deal RM140 , include carry case, extra 1 battery, extra 1 atomizer
I change to K100 because my Cobra clone could not fire < 1.2-1.3 Ohm, now the lavatube only used on my Vcore 2.0 tank which @ 2.2 Ohm

Wanna try dripper and try the epic vapor production

Another peer pressure for a day !




This post has been edited by eddie_lim: Apr 26 2013, 09:12 PM

Tq
So significant different comparing lavatube?