That is not the throttle body, that is your fuel pump under your rear seat. Dun belip me go take out your rear seats then start car again 

Well i encounter it whenever i didn't warm up my unit then straight drive out and lap (coz of rushing) ... when running wont feel much just when u stop at traffic light even free gear my rpm will suddenly drop and recover back ....

ahhhh. remind me of the moment, there's once a time where im rushing.... cold start then terus press gas pedal, feel the car badly jerking

usually, when cold start i let my car warm up 2 to 5 min or see the temp meter. reach 2 bar can jalan without feel jerking

But what i think when start car engine jerking is normal .... as fuel flown to engine and activation of sparkplug to burn fuel until it stable will jerk is normal ... what i afraid of the forum said is the water flown from the wider drain will leak to Head Unit and ECU ...

The forum-er also say that...But I just put the water at wiper there..And no leak la..Luckily....

logically spekaing, if a circuit board has fluid on it, it will fry terus. It will not cause choking or whatever. LOL

logically spekaing, if a circuit board has fluid on it, it will fry terus. It will not cause choking or whatever. LOL

Hey guys wanna ask do you still remember ur 2nd year insurance how much u pay for the premium? (FLX Exec Manual)

FOR All SAGA FLX, not sure this problem is include blm or just saga flx.

There is a big issue for saga flx, the engine and electric board may directly contact with rainwater. the rainwater will flow to the engine through the gap betwwen two iron plates which near to the wiper or below wiper.
Open the front hood, then slowly pour some water to the car's front windscreen, you can clearly see the water leak out below the middle position of the wiper to the engine and board. this directly cause the engine JERKING happened in every SAGA FLX.

I tested just now, beginning when i pour the water, there is no water leak at the bottom of the wiper to the engine. all the water flow to both corner side(this is normal, all car is like that)  but when i pour more water, the water starting leak out from the gap between two iron plate when screw with a nut. it directly hit to the engine.
hope all saga flx owner share this to your frineds。
other forum user say that the hole is only can see when take out the wiper and case. i think is screw nut hole.
the only way to solve it cover it by using gun glue(or something like a black in colour glue that use to glue the front windscreen)

FOR All SAGA FLX, not sure this problem is include blm or just saga flx.

There is a big issue for saga flx, the engine and electric board may directly contact with rainwater. the rainwater will flow to the engine through the gap betwwen two iron plates which near to the wiper or below wiper.
Open the front hood, then slowly pour some water to the car's front windscreen, you can clearly see the water leak out below the middle position of the wiper to the engine and board. this directly cause the engine JERKING happened in every SAGA FLX.

I tested just now, beginning when i pour the water, there is no water leak at the bottom of the wiper to the engine. all the water flow to both corner side(this is normal, all car is like that)  but when i pour more water, the water starting leak out from the gap between two iron plate when screw with a nut. it directly hit to the engine.
hope all saga flx owner share this to your frineds。
other forum user say that the hole is only can see when take out the wiper and case. i think is screw nut hole.
the only way to solve it cover it by using gun glue(or something like a black in colour glue that use to glue the front windscreen)

FOR All SAGA FLX, not sure this problem is include blm or just saga flx.

There is a big issue for saga flx, the engine and electric board may directly contact with rainwater. the rainwater will flow to the engine through the gap betwwen two iron plates which near to the wiper or below wiper.
Open the front hood, then slowly pour some water to the car's front windscreen, you can clearly see the water leak out below the middle position of the wiper to the engine and board. this directly cause the engine JERKING happened in every SAGA FLX.

I tested just now, beginning when i pour the water, there is no water leak at the bottom of the wiper to the engine. all the water flow to both corner side(this is normal, all car is like that)  but when i pour more water, the water starting leak out from the gap between two iron plate when screw with a nut. it directly hit to the engine.
hope all saga flx owner share this to your frineds。
other forum user say that the hole is only can see when take out the wiper and case. i think is screw nut hole.
the only way to solve it cover it by using gun glue(or something like a black in colour glue that use to glue the front windscreen)

Anyone install all Door lock on saga flx? I heard that OEM lock can click on the reset button beside the hazard light then can unlock all door.

But now my car it will auto unlock when I driving. Any pros know what's the matter? This matter occur after I send to COSE 

Anyone install all Door lock on saga flx? I heard that OEM lock can click on the reset button beside the hazard light then can unlock all door.

But now my car it will auto unlock when I driving. Any pros know what's the matter? This matter occur after I send to COSE 

ABL ?

normal to me. ABL got many type. after crusing 7kmh beyond, auto lock. got also when press brake, it auto lock