i think i'm in a good section here...here's mine after oced wif my combined 512MB Kingston KVR DDR400, 1st module is Micron -5BG n Elpida dunno wat type though.here's the detail, in order to get even higher CPU FSB, i have to decrease memory frequency from DDR400 to DDR333, before that, with DDR400, i only manage CPU FSB @ 220x9, which only get 1980MHz@1.9GHz,beyond that, not stable... .so, after doin some research n experiment, i decrease the mem frequency index under bios menu, n set to 333MHz, n get 277x9 @ 1.45VCore/2.9VDimm,3x HTT.long story short...here's the screenie...

i wonder, my external clock speed supported is 3.70GHz, my bro Core oni 3.0ghz, can u guys explain this?mine is venice n so is his... AMD Athlon64 3000+


after 38% oced... dunno if i can get even higher than this...


that's ntune screenies...

ok guys, any comment?suggestions?

btw, i'm using 350W Enermax FMA for this experiment, perhaps wif liberty 620w can get even more?or anything else?

312HTT?to me, higher HTT doesnt improve anything, it lead to unstable oni...i rather go for higher CPU n RAM speed.

guys, wta, suddenly my pc hang at post after clocked at 250 1:1, y?before that, everything is normal...wat just happen?

whoah, @1.4vcore oni?mine venice e6 3000+ have to overvoltage till 1.55 to make it stable...y?


is my corsair pc3200c2pt ver 5.2 compatible wif my premium v 1.02 (1011-006)?actually, i used to set it up to 280HTT (1:1) @2.52GHz,but now fails...everytime hits 239HTT, it hang or not boot...any suggestions?

owh ok...
my prob is, i tried to OC 1:1 n using clockgen, i only can get as high as ±240MHz, dunno y, beyond that it just hang...assuming it's from VCore, i tried to Overvoltage the cpu up to even 1.55VCore, still fail, cannot go beyond 240, even after i lowered HTT multiplier to 3x.
when using DDR333 instead of DDR400, same problem, cannot go any higher than 240, even after i decreased the cpu multiplier...

nah...i successfully get 290HTT 1:1 after in increase the timing 3-4-4-8, its bootable n not stable though, so using clockgen to decrease the HTT to find wats the most stable, until i found that @ 290HTT, 32M PI Calculation will no result (NO EXACT DATA IN ROUND), @280HTT, 32M PI Calculation still fail, @270HTT successfully finish the 32M PI Calculation but not pass my minimum overnight priming until at 266HTT after increasing from 260HTT pass all the stress test.fyi, in gaming experience n benchmarking...i passed all the test, no artifacts n no hang or watsoever even at 280HTT@couple of hours...
owh yeah...the VDimm for my new ValueRAM is 2.85VDimm

This post has been edited by sniper69: May 9 2006, 07:05 PM

latest BIOS?how much u bought this board?
mine oso, weird temp showed here...

RM870?
fyi, i flashed the latest provided by asus site (1011-006) but doesnt change anything, so i flashed back to default which is 1009, that 1011-006 is still beta lor...

finally able to hit 300HTT but failed after 5hrs priming... wtf

[attachmentid=108770]

tried already, damn it took more time than normal one (i like the normal one) no talkČ. but it helps a lot for any newbies here.

havent try, but from what i noe, to use it, all the music folder must from same drive (if u set it at Drive D:/)then u shud have set it at BIOS at D: drive... savvy?