how about my room setup?

yr 9622 and av pack have how many 3pin and 2 pin socket and statelie connector and tel connector ? max power support ? need to know in case pick a wrong thing . my AV total power consumption will exceed 1000w . play safe better buy more than 1000w to support . no understand if tel line go to the av pack then go to normal splitter isn't same with from tel-avpack- SP9201DAF ? sorry i not the electric professional .

if the LCD TV only for desktop and laptop...
you can use the combination of MDSC0039 + SP9201DAF
SP9201DAF will replace your existing ADSL Splitter Filter...


if exceed 1000watt, recommended to get AV Pack instead

The tel filtration of AV Pack are purely for analog / fax signalling only in order to reduce the signal loss for those equipments, hence transmission speed are different between analog & digital and the surge sensitivity level are different too...

lower transmission speed allow higher filtration level and lower surge sensitivity;
higher transmission speed must lower filtration level and higher surge sensitivity

if u tended to use ADSL thru AV Pack, the digital signalling may no able to went thru AV Pack 100% and you may suffer the random disconnection of ADSL... that the reasons why Cal-Lab have different model even though for RJ11 such as SF9512ARD and SF9512DSL

i see . so my device total have 6 use 3 pin and 2 use 2 pin . that why i need to know how many 3 pin and 2 pin slot on that av pack . if not enough slot can use normal 3 pin plug ( 3 side with 3 pin ) ? total not exceed 1500w . can plug in together with one single power input source ? need answer before finalize the purchase . sorry to many question .

AV pack have 3*3pin and 3*2pin...
u can use 3 way socket or extension socket to increase the number of power socket but total power consumption dont over than 2000watt

pm me the best price for av pack and SP9201DAF . for the installation of SP9201DAF is from phone line - av pack - SP9201DAF- telephone and adsl modem ? is correct ?

for MDSC0039FC, the cable from satellite dish will connect to the MDSC0039FC, then I have to buy extra astro cable to connect from the MDSC0039FC to the Astro decoder right?

and for the MDSC0039, what maximum voltage/watt that can handle by this MDSC0039?
So the MDSC0039 can handle my UPS that connect ( 1 Desktop + 1 Laptop + Printer + LCD Monitor + Piano Keyboard)
Sorry for ask so many question

SP9201DAF wont go thru AV Pack, both of them act as standalone.
simple say, the tel module of AV Pack will no use


yes, dish > MDSC0039FC > decoder

for ur PC setup, MDSC0039 1000watt are sufficient...

SP9201DAF only protect tel line right? If I connect my Desktop PC with LAN I need also use SLAN1236 right ?

if the modem side by side with PC, there are no necessary for LAN protection...
but there have no harm to protect it also if u tended so...

ok ....pm me the price . i at johor , tangkak . how long to deliver ?

how to use the SLAN1236 ?

So MDSC0039FC + MDSC0039 + SP9201DAF + SLAN1236 + postage = how much ?

Hi...I am interested ..coz yesterday lightning just strike my 3rd modem and my auto gate..

you can use SF9512DSL / SF9812DSL / IT Pack if ur PC setup consisted of PC and modem only but dont have ADSL Splitter Filter & telephone nearby ur PC setup and dont have other wired LAN cable connected to other PC which located at other locations.

for auto gate, full protection as picture below:

afternoon received my order , thank for good services .

Receive mine yesterday

hey bro,

can suggest for CAL-LAB for below setup.

- Unifi (router, phone & modem)
- NAS
- desktop PC
- printer

This post has been edited by exkaizen: Feb 27 2013, 03:27 PM

Unifi using fiber or copper input?
does the phone, router, modem, NAS, PC and printer located together?
does have other PCs connected to router via wired LAN cable?

you can use SF9512DSL, SF9812DSL or IT pack