Well since I want to save space.
I will go only SSD.
Maybe a second SSD in the future.
It's an M4 256gb.
It's expensive to me.
Here's some shot.





So since I was going for a black and gold theme.
The blue sticker for the SSD won't cut it.
So.... Let's remove it.
In my opinion, it looks sleek.
I remove both stickers.
Here's some shots.

Watercooling Parts Teaser : FedEx
An update or two will be posted before my watercooling parts update.

I wanted to change stuff that I didn't like.First the SSD brackets.

I hated the mesh so I cut it out.

It doesn't have to be clean since it will be in the side in the darkness.

This pictures are before, after, and after with SSD.

The side where the bracket is located.

I used diamond cutting disc for this.

I found that it's way easier for the brown colour blade which left alot of shaving.

I was bored while at that time so I painted my fan grill gold.

And this are some misc.

Items that I bought.

Acrylic cutter/plastic cutter.

Dremel Chuck.

New sets of small drills.

MNPCTech UPDATE!!
This update is from a package by Bill.
Thanks for the *shipping* *wink wink*

First is the handles.
The most expensive part and most thrilled about part of my build.
Is to carry around places, so the handles is the most important.
I'm gonna add in the card too. Product Placement.


And the God Of Tapes!!
I repalce my adhesives cable ties with one of these in my Blacklist build for the cathodes.
Works like a charm.


U-channel. Looks smaller than I thought.


Finally, the scotchbrite pad.
It comes in 3 pack and it is way bigger than I expected.
A substitute for sandpaper.
What I found out is that it makes like a brush aluminium finish.


P.S. Thanks bill for the shirt.
Haven't got the chance to wear it yet as it's 95 degrees here.

Ok, let's change something about the case.
I used the scotchbrite pad to rough up the texture of the case.
It gives a brush aluminium and yet a gun metal look.
Here's some top shot of the case.







Next for the update is the mnpctech handle. I first drill a small hole and then just slowly use the same drill bit and slowly 'sand' it to make a big hole. Here's the final result.

Ok there will be two updates today.
Currently, as I'm typing, is 8:23 am.
There will be an update on the afternoon.

Ok let's start by first, I got my taste of acrylic.
I tried cutting it with dremel. Let's just say, it's so ugly.
And the side which is less jaggered is by using an acrylic blade by cutting and then snapping it.
And I accidentally scratch the inner acrylic.
This is just a test, this is not the final product.




Gunnar optics but returned it since it doesn't fit me for the lawls.
And it was suppose to be my safety glasses.
Oh well...




And I start cutting the side panel.
It was difficult and it required alot of cooling of the dremel.
All of it is done by dremel.
Here's the process

And then I cut an acrylic that is larger than the cut.
I didn't make it a nice cut because you will not see it (the edges).



And then god of tapes will appear for the first time in this build.



And I forgotten that I put the u-channel. It's very difficult than it looks and it requires practise.
Here's my attempt.