im looking to design a jersey for my group, n i wan d 3/4 hand cut jersey like dis



can sum1 sggest me where can i go?? 

hey guy whats your opinion on 26er vs 29er ??

Hye.. Just bought nemesis pro.. Am i qualified as mtb gang?

it not about poor or not la... there always misconception about bike and its value. a lot of bikes that look like a mountain bike out there is actually meant for the tarmac; i like to call them hybrid commuter, but they are absolutely not fit for actual off road riding. you can but they were not built to last.

at this discovery stage... an entry bike selling at 3k for example may seem expensive, once you ride, know more and want more.. then you can justify to pay more for a proper make mountain bike.

no worries since you already bought... go try and ride it on actual offroad.. then you will know. just remember to be safe ..always ride with helmet ...

currently dis is my mtb setup...
-full deore 10 spd
-rockshox reba 120mm
-tektro draco brake
all others r stock exitway brand..
im now intrested to convert from xc mtb to am hardtail mtb..but, dunno where to start upgrading/change..my 1st target wud be swapping my crank to 2 speed crank wif chainguide n a good wheelset..wat say u all sifus?? 

yup, im thinkin dat too...im more into hardtail lol...mybe ill save some money n buy a good am hardtail...btw, where got sell some am hardtail?? 

to many many pros here,

wats ur thoughts as im considering on getting a Trek 4700 26er ?

http://www.trekbikes.com/us/en/bikes/mount...ies/4700_disc/#

price around 2.5k

*Help*
One of my old bike chain cant be unlock. It has been chained for quite a long time, now the lock use key also cant be twist open.

Any good solution for this besides cutting it open?

tried wd40 but no effect all at. Cant bring my old bike to bike shop since locked at home.
So what does the tool do?? Cut my lock open?

Hi Bros!

I am planning to get a MTB. Will start off at around the housing area first to build up on the fitness and then might think of delving further to take it up as a hobby..

Thinking of buying my first bike. I have done a fair bit of research, and have narrowed it down to 2 models:

1. Kona Blast 2013 - Priced at around RM2500
2. US KHS Alite 1000 - Priced price at around RM2300

I would like to know, which of these 2 are of a better value for money? Or any other bikes which you guys might be able to recommend.

I am pretty big and heavy (6 ft and almost 100Kgs).

Thanks for the feedback!! 

Any other suggestions bro?

I now using 9 speed, crankset if change xt the teeth is same y will lighter really dont understand, is it Bzos BB? Leg power need a time upgrade, everytime cycle upper of  my leg part feel pain also dont know what is the reason...

upgrade BB wont feel any different la.. dun simply say. ceramic/tiramic is expensive and that slight smoother bearing wont be felt unless u already have other good component to go with it at peak performance.

9 speed to 10 speed upgrade will definitely help on the climbing due to better gear ratio... 22t front with 36t rear.

weight does matter... 15kg vs 12kg big lot of different more over a 20kg bike. dun la simply give extreme different.
weight weenies actually refers to those who pay dearly to drop little weight different. its a misused term btw.

for newbie, 9 speed will do now.. ride more and build the stamina. upgrading to 10 speed help but most likely u will still push bike. might as while train harder and upgrade things like the wheelset to a lighter one that give you more significant differences during your ride. rolling weight can be felt more obvious that dead weight.

yes, BB wont... Shimano BB to token tiramic BB or hope ceramic BB wont feel much/any different.
cadance and gear got nothing to do with BB.. BB is just the bearings. so changing bb wont feel much.

changing crank will help.. in most cases you change BB with your crank is due to different size and different crank.
especially from square tapered to hollowtech crank due to lighter crank and better gear ratio. so you better dont confuse yourself or others on BB

No dude... Square tappered and HollowtechII is not a BB!! they are called spindle. spindle are part of the crankset. but they are related to BB.
what you referring is the crankset. get your terms right and not to confuse others.
but if you say change crankset help on climb.. yes due to weight and the gear ratio.

BB is the bottom bracket... changing crankset with different splindle type requires the change of BB to fit due to different diameter or width.

if you are using the same crankset and change BB from standard BB to ceramic or tiramic makes no different.
So please give advise with correct terms, imagine people listen and go change the BB only will waste money.
if no believe, keep your deore crank and change your BB to ceramic bearing and see.

offend not taken,

but come on la...keep your ego.  the point is not about ceramic or tiramic... what i am saying is correcting you on the wrong advice you given saying about "changing BB will help on the climb"... u merely giving wrong advise with wrong and confused terms. on otherhand, changing crankset will help. that should be the right term since you confused and interchange crankset with BB.

and secondly, changing ceramic / or tiramic do not mean you need less maintenance.
changing better BB with better seal might. ceramic or tiramic is only referring to the type of ball bearing used in the BB.

Clean and simple...

Everyone thinks like you ksh and boonfoo close shop

if you have the money, buy the most expensive option,  at least it will make you feel good. Else how do you compare toyota vs honda vs nissan?

Same price range bike comes with same price range quality parts