I've terminated Unifi after installing Maxis Fibre and since Saturday, the link is down, the LINK led is blinking all the time and the AUTH will blink rapidly at certain interval. Is this cable problem or did the Exchange guy deactivated the AUTH PassWord?

And stupid me, I did a restore to original configuration this morning and I couldn't get the telecomadmin's user/password anymore, it is wiped out and only root/admin can access through web and telnet. I'm hosed I guess.. will need to wait for them to come tomorrow.

TM Technician comes with a new password today, he entered the new one and all back to normal again. But this mean that I couldn't do a backup and restore my modem. Anyone knows how to retrieve the PassWord using telnet?

Ok, by resetting the BTU previously, the standard user/password is back to telecomadmin/admintelecom .. now I could access the router backup/upload again.

This post has been edited by wiraone: Jul 9 2013, 11:17 AM

Anyone has migrated the VOIP to HG850a? I'm trying to use the guid on the first post, Basic -> VOIP -> SIP Local Port = 5068 but it is complaining about ALG has use the port. So, I went to Advance -> NAT and yes, it is used there. Should I use SIP Local Port = 5060?

One other thing, it seems that Maxis VOIP won't pickup a call, the other end hears the ringing tone but the phone doesn't ring. But if I make a call first, hangup and receive a call, this is working. It seems that the routing to my phone doesn't work unless if I make a call out first. Anyone experiencing the same?

Had this problem before and found out that I got a wrong phone number configured into my original technicolor router. Asked the maxis guy and they give me my correct phone number and password and all is okay. The password can be as you said above or mine is a combination of few numbers which I don't remember much. Just ask them vua twitter, they're quite responsive during work days.

I had a problem once, what I did before they came, I reset the fibre modem

Anybody else having the same problem as me? Suddenly the VOIP LED is gone and checking the webconfig, the VOIP status is now become unregistered. Looking at the log, it is giving me SIP error 408.

Update: Just received a reply in twitter, they acknowledge the problem and they're rectifying it. I guess I'm not alone then.

Anybody know how to prevent TM from reconfiguring our HG850a? Out of sudden, my voip went dead and I couldn't seems to get into the HG850a from the URL. So, did the whole process again and found that my old voip is now in place instead of the maxis voip. It seems that TM has pushed their config down to my modem again. Grrr...

I did that, won't help, they re-provisioned the modem now and then. Somebody said on every reboot.

I believe this is the best solution for now, I've an old Linksys (now CISCO) ATA which is not being used right now. I've SIP account with Manchester UK call area, probably I'll try to power it up again.