Feb 18 2015, 01:52 AM
The access to HG8240w is permanently blocked when first boot startup until you RESET it (Restart is not an option).
The same step for HG850a, just follow below
QUOTE
Preparation
1. Download & install autohotkey http://l.autohotkey.net/AutoHotkey_L_Install.exe
2. After finish install autohotkey, launch it and right click on the AutoHotkey icon at the right corner taskbar, click on "edit this script", a notepad will open. Change the content to following:
^!z::
Send enable{Enter}configure terminal{Enter}shell{Enter}iptables --flush{Enter}
return
^!x::
Send iptables --flush{Enter}iptables --flush{Enter}iptables --flush{Enter}iptables --flush{Enter}
return
3. save it and close the notepad, right click the AutoHotkey icon again and click "reload this script"
4. download putty http://tartarus.org/~simon/putty-snapshots/x86/putty.exe
5. configure your pc ip to 192.168.100.123 subnet 255.255.255.0
1. Download & install autohotkey http://l.autohotkey.net/AutoHotkey_L_Install.exe
2. After finish install autohotkey, launch it and right click on the AutoHotkey icon at the right corner taskbar, click on "edit this script", a notepad will open. Change the content to following:
CODE
^!z::
Send enable{Enter}configure terminal{Enter}shell{Enter}iptables --flush{Enter}
return
^!x::
Send iptables --flush{Enter}iptables --flush{Enter}iptables --flush{Enter}iptables --flush{Enter}
return
3. save it and close the notepad, right click the AutoHotkey icon again and click "reload this script"
4. download putty http://tartarus.org/~simon/putty-snapshots/x86/putty.exe
5. configure your pc ip to 192.168.100.123 subnet 255.255.255.0
6. Plug LAN cable connect ur pc to the HG8240w continue next step.
QUOTE
Action
1. open a command prompt [windows key + R, type ' cmd ', enter]
2. type
3. open putty client and ready for telnet: input 192.168.100.1 and choose telnet. Dont click 'Open' Yet.
1. open a command prompt [windows key + R, type ' cmd ', enter]
2. type
CODE
ping 192.168.100.1 -t
to perform continuous ping to 192.168.100.13. open putty client and ready for telnet: input 192.168.100.1 and choose telnet. Dont click 'Open' Yet.
4. Reset the HG8240w (at the back near power cable) hold the reset button for 10 sec then release and wait until the 4 LAN port light up together, once reset continue next step.
QUOTE
5. Once you saw you're getting Reply from 192.168.100.1.. IMMEDIATELY click "Open" in the putty client.
6. You're now successfully telnet into the HG850a but dont be happy, your access will soon be block once the HG850a finish loading the iptables, so you need to perform the following steps quick and accurate.
7. login by
username: root
password: admin
8. press the hotkey [ ctrl + alt + z ] , wait for the command to finish typing,
then immediately repeat pressing [ctrl + alt + x], let the command finish typing between the interval.This is the Hotkey that we configure into the AutoHotkey previously. This is to let the AutoHotkey help us to type the command in a very short time, before the iptables kicks in and repeatedly wipe the iptables.
9. After around 10 seconds, if you still get response from the telnet (respond to your "enter"; press enter can go next line), then you're safe for now.. but not permanent, if u power off and power on your HG850a, you will need to do from step 1 again.
Configure to have permanent access and no need to hassle so much, perform the following:
Web Interface
1. Open your browser, go into http://192.168.100.1
2. Login with admin account:
Username: telecomadmin
Password: hs5711Bbfh
6. You're now successfully telnet into the HG850a but dont be happy, your access will soon be block once the HG850a finish loading the iptables, so you need to perform the following steps quick and accurate.
7. login by
username: root
password: admin
8. press the hotkey [ ctrl + alt + z ] , wait for the command to finish typing,
then immediately repeat pressing [ctrl + alt + x], let the command finish typing between the interval.This is the Hotkey that we configure into the AutoHotkey previously. This is to let the AutoHotkey help us to type the command in a very short time, before the iptables kicks in and repeatedly wipe the iptables.
9. After around 10 seconds, if you still get response from the telnet (respond to your "enter"; press enter can go next line), then you're safe for now.. but not permanent, if u power off and power on your HG850a, you will need to do from step 1 again.
Configure to have permanent access and no need to hassle so much, perform the following:
Web Interface
1. Open your browser, go into http://192.168.100.1
2. Login with admin account:
Username: telecomadmin
Password: hs5711Bbfh
from here
3. Go to 'Security' > 'ONT Access Control Configuration' and tick both HTTP and telnet.
» Click to show Spoiler - click again to hide... «
4. Go to 'System Tools' > 'Configuration File' > 'Save Configuration', once complete you are now safe to restart and access HTTP/Telnet permanent (unless you RESET it).
» Click to show Spoiler - click again to hide... «
Setup VoIP into HG8240w
1. Go to 'WAN' > 'Wan configuration' follow those step below
» Click to show Spoiler - click again to hide... «
2. Go to 'Status' > 'WAN Information' it show connected with ip address
» Click to show Spoiler - click again to hide... «
3. Go to 'Voice' > 'VoIP Basic Configuration' follow those voip setup below
» Click to show Spoiler - click again to hide... «
4. Go to 'Voice' > 'VoIP Advanced Configuration' must change those step below
» Click to show Spoiler - click again to hide... «
5. Go to 'Status' > 'VoIP Information' check to see voip up and running.
» Click to show Spoiler - click again to hide... «
6. Plug your telephone into 'Tel 1' Port and try to make a call to your mobile phone.
Alt link for autohotkey https://doc-0s-7o-docs.googleusercontent.co...fbFU?e=download
Enjoy and hope you like it.
This post has been edited by eeyak: Aug 24 2015, 03:02 AM
Quote
0.0240sec
1.31
7 queries
GZIP Disabled