10 minutes only Must be at least 12 hours

i know...

after 10 mins .... selamatlah.....

huhu...

FSB 221 @ 2 - 3 - 3 - 11

after 6 mins of prime..... bye bye

owh.. well that was using BY SPD , now it is set to AUTO

My Corsair VS can do 265MHz stable, who belive?

Still ... 220MHz is kinda low for BT/DT-D43s standard

where u bought the 1G ram with samsung uccc chipset?
for KVR how much ar?
when u bought? last time i find dun have....

This post has been edited by ltw82: Apr 3 2006, 02:27 PM

I'm from Penang. Not really sure about KVR

DT-D43 can do 250mhz@3-3-3-8@dual channel enable@PAT enable.
Even with 4 stick (512mb x 4)

i can only get 215MHz after primed 6hrs wif 3-3-3-5.can i get any higher?at this speed, i even increase the dram voltage to 2.7 n cpu voltage to 1.425.do i need to decrease the multiplier?

AMD Athlon 64 3000+ Venice (S-939) 1.8GHz (Multiplier 9) can get higher? say 10 or 12 multiplier?

215MHz for the Micron or ELPIDA?

And no for the second question. Athlon 64 3000+ has a multiplier of 9X and below, if you want procs with unlocked multipliers get the FX series

both of them...mayb tak sama chipset cant get any higher aaa?
ic, fx series, opty? means those unlocked multiplier can get higher/lower the multiplier?wat i'm trying to say is, the max multiplier is 9x n the fx can beyond the max multiplier?

I think the ELPIDA hit the end of the road ade, bottlenecking your Micron. For Opteron and Athlon 64, they can't go higher than their default multiplier (Exp: Athlon 64 3000+ max is 9X, Opteron 144 max is 9X). As for the FX series, I think is 4X to 25X Not too sure because I don't own one.

This post has been edited by Dreamworks: Apr 5 2006, 07:55 PM

so, shud i just unplug th elpida n try wif single channel micron?work aaa?
i get it, there's no way can go byond max cpu multiplier rite, so say, wif my a8n-sli premium+512mb kvr micron+venice 3000+350W enermax, wat r u suggest?memory timings?default is 3-3-3-8, now wif both module running at 3-3-3-5 @ 215Mhz 2T - cannot go to 1T, dunno y..just hang at the windows booting.

erm.... this is my current setup...

AMD athlon XP 1800 ++ @ 220fsb x 9

BT-D43 256 , DT-D43 256 @ 2-3-3-7 @ 2.9v

any recomendations ??

Yes, it'll work but you don't want to do that. By removing the ELPIDA from your system, you don't just loose half the amount of memory you originally have, but also dual channel capability. Of which would lead to severe performance penalty that even your Micron @ DD500 could not make up

D43s can clock well @ 3-4-4-8 timings. For 2-3-3-7 I think that would be as high as it could go.

hoe bout my micron? default timing is 3-3-3-8

Refer to post #44 dude, it's there

Wow..that chip...i used to have it. Running great at 11-3-3-3.0 1T. I love voltage..like Bh5..at 2,9v.max around 235mhz..but at 3.2v..it can do 270mhz. Not sure if 3.5v.

The Micron or ELPIDA? You mean 3-3-3-11 right?

sorry....

my timings is

2 - 3 - 3 - 11 , not, 2 - 3 - 3 - 7

FSB 215 most stable....

shud i decrease the multiplier ??