Last minutes, 2 last post kena stopped jor not easy under v12k gabermen

Ya! His fish oso "rosaked", that's why save petrol like Shawie He request to temporary fix his fish with OCT to be sure intake is kept clean wor

Quite confem today, after yesterday night took out the "accidental ground cable", I can notice the throttle lag is obvious again. The subwoofer is "burping" again, as aircon kicks in, RPM will drop until the car felt like shutting off Next project is definitely Ground Cable!!! I knew some will say its not related, I oso can't explain it as previously ayam as well disbelief GC & VS will effect engine performance. Ayam impressed by the butt dyno and willing to let people call me an ignorant, but I know what I want for my butt.

Ok Ok! Here's the detail It was a super silly mistake. I was wondering how does it look like if I hook up LEDs on the hood, so I used my jump start cable directly connect from battery, pull the jump start cable all the way to the hinge, use duct tape hang both cables(+ve & -ve), and the cable clamps on the super bright LED H3 bulbs. After the soft test run, immediately I unhook the positive cable, meanwhile I clamp the negative cable on the lifter hook(near by purge valve on AFM, got 1 engine hook for lifting up engine), plan to keep my positive cable first only come back and clear up the mess. Mana tau, kept the positive cable, come back immediately forgot the negative cable and busy pulling off duct tapes After that been left the cable clamp on the engine hook whole day until night time

zeone
mengsuan

Seriusly, I don't really care huat is in the cable. I know welding cable is 300a onwards, and the kedai logam tauke did suggested to use those welding cable to make jump start cable. However, the jump start cable that I accidentally grounded was cap ayam RM9.90

I, most probably is gonna get the 500a welding cable & stuff it on my engine hook Trouble is, the lug will be too huge, need to find a way to tie it up

mengsuan
Plan to use hammer :notsure:

kenjilew
Gimme time

r3apers
Matt black is consider SOLID paint category. Applying clearcoat BEFORE matt black wld mean easy to chip off when hitting sand stone, unless u use corse ground sanding before applying matt black. Let's just say the matt black bond very well with your clear coat, does not mean the clear coat wouldn't fall off. Korek way to effectively apply mat black is, wet sand the original surface thoroughly, make sure its very clean. Apply SEVERAL thin layer of matt black to ensure its thick enough & bond well.otherwise a month or 2 later u will be squating down patching white dots with marker pen liao

SiuYi

Overlooked. Don't angry.

Kedai logam is the answer for this time.

Active subwoofer, under driver/passenger seat

r3apers
I got read ur post, that's why I say why still clearcoat? Its not required to have that if sanding is being done properly. U will need multiple layer of matt black to make sure its thcik enuf & that's all.

I bought last year can ar

SiuYi
Rough estimation below RM30 include 2x 500a lug + 5ft 500a welding cable

v12k
Yes korek. Too long I even more worried, later tiao taio feng.

r3apers
Tats why I said ROUGH ESTIMATION. I will work around my budget, eyeing between 200-500amps cable as long as within budget. However, if all that doesn't work out, might as well buy another set of jump start cable, split with kenjilew we take 1 cable each Got clamp sumore

r3apers

Don't say until like I'm berserk. I'm not angry oso. Even last time got into big fight with that sumone FC hater oso I act passively nia Today after werk go see funker kedai logam ask 1st, if price within bajet then will proceed. Hopefully tonight will have the ular sawa GC on the car ady

r3apers

Merz TT, seriusly considering. CNY around the konar liao

Mahihi

Wait wait. That 1 more things involved, costing oso issue.

r3apers

No need wax no need polish. Exterior I got cyclone puchong kinrara & PETRON Sri Damansara. I'll just let Merz wash abit, more importantly I want to suck my interior kaw kaw. Bought the car almost a year liao. Inside dust an inch thick

C2KBAS2005

Cyclone berada puncak bukit
Atas bukit sana ada BHP
Sana bertentangan lampu trafik
Mendaki-daki keta kena cuci
Bangala cuci burmist pon cuci
Masuk cyclone basuh confem jadi wangi
Mau bikin gaga iswaga sampei hepi
Harga tetap sama empat ringgit
Saudara-saudari mari-mari
Mencuci-cuci di cyclone,jangan tak cuci
Pigi pigi cyclone cuci,jangan tak pigi

okey ar my pantun? Soli I super cainis ed

Heavy traffic day, sumore "white feet duck" catching emergency laner, causing even more jam to Jln Kuching As a result funkedailogamwent home jor couldn't make it for customize GC

GPMM

If I were to view anything in SPOILER, I had to reply with quote & read it from there. If its a picture, will have to reply with quote then copy link from there & reload the page with that link. After saw the pic will need to load back LYN page, then only I able to respond to you properly.

MI what? Oh? You mean Turbo izit?

Recently quite a lot of TT happened ady. This weekend we're eyeing on Bukit Jalil Merz - AGAIN another car wash TT.

195/50R15 is fine for most 15" rims. However not recommended 195/55R15, could have sagat issue.