So what you ended installing bro?

I've settled for 16', but not is still undecided on the gap of the gate plank

Oh, so which motor u using?

For your information.

I've installed a folding gate length 23.6' feet with DCMoto 1st gen GFM 905 without breaking a sweat. That was back in 2007.

In 2008, I've installed GFM 905 2nd gen on a 27' length 4' high folding gate. Is been use on government building as a entry gate barrier. That means daily opening closing comes to 30 to 50 times daily.

In August 2012, I've installed first batch GFM 925W on a 23' feet length 8' high folding gate. Fast and steady. Still working to date.

GFM 925W has been reworked planetary gearbox with monoblock system to improve rigidity.

Since u all talking bout autogate and gate opening length then u all sure re-do the front gate ( pillar and fence ). Do you apply for permit ( my case is MPSJ ) for all this works.

would also like to know if this requires approval from city council

My Hse Use 14feet gates no problem to park two cars in the porch and getting out. My hse only 18 feet wide hence Pillar 2feet each side

No need to get approval/permit from MPSJ..unless u change the structure of ur house.

Sorry for bumping this old thread. I'm also deciding if I shall hack away the existing 14' gate or not. If 14' is just nice for 2 medium cars, then I need to only spend about 2k for the motor by using back the same gate. But if wanna hack away, then need to spend 10 to 15k for the hacking + rebuilding (+rewiring) + new gate with motor.

Anyone else with 14' gate can share some comments?

Thanks

can

Thanks, but can both come in/out independently? Or 1 car must come out first before the next one?

Also did you maintain the 14' or using 16' now?

Thanks

16ft

You guys - What is the height of your autogate?

Is there a standard height, say 5feet or higher?

You guys - What is the height of your autogate?

Is there a standard height, say 5feet or higher?

U meant the gate height or height of the autogate installed?

Both would be great, 1 measurement from the floor to the top and the other just the height of the gate itself.
Thanks for the clarity

It can have arch shape and the height can be between 5~6'. Some can be square with 5' height. All just gate measurement. The gap at the bottom is narrow enough not to let adult cat to slip through.

Height of my gate is 6 feet swing type, autogate is installed just 2 inch above ground/floor tile.

More or less 5ft to 6ft , alrighty - thanks guys, appreciate the feedback

Hi.

I've been given this specs and quote. Is the price reasonable? Should i use Fagolli or DCmoto for the autogate system?

FAGOLLI FULLY ALUMINIUM GATES
1. To Supply and Install Fully Aluminium Folding/Swing gates:
Dimension Folding/ Swing Gates: 14’x5’5H
Price : RM7840
*Aluminium Plate (Lavender/Carnation) (Color: White/Grey)
*Aluminium Outer Frame (Color: Dark Grey)
*Powder Coating
*Trackless

2. Fagolli Folding/ Swing Moto Set:
*Housing X 2pcs
*Multi function remote control 3pcs
*Wireless Keypad with ANTI-SPY technology 1pc
*Transformer 1pc
*Control panel 1pc
*Siren 1pc
*Receiver 1pc
*Gear box 2pcs
*Gear moto 2pcs
*Drive bar 2pcs
*Panel box Size:30x30 1pc

3. FREE Back-up battery 1pc